Text preview for : Compaq Presario 3000 Series.pdf part of COMPAQ Compaq Presario 3000 Series Compaq Presario 3000 Series service manual
Back to : Compaq Presario 3000 Seri | Home
b
Maintenance and Service Guide
Compaq 800 Notebook Series Compaq Presario 3000 Series Mobile PC
Document Part Number: 307503-002
January 2003
This guide is a troubleshooting reference used for maintaining and servicing the notebook. It provides comprehensive information on identifying notebook features, components, and spare parts, troubleshooting notebook problems, and performing notebook disassembly procedures.
© 2003 Hewlett-Packard Development Company, L.P. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and/or other countries. Intel, Pentium, and SpeedStep are trademarks of Intel Corporation in the U.S. and/or other countries. All other product names mentioned herein may be trademarks of their respective companies. HP shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The information in this document is provided "as is" without warranty of any kind, and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.
Maintenance and Service Guide Second Edition January 2003 First Edition November 2002 Document Part Number: 307503-002
Contents
1 Product Description
1.1 1.2 1.3 1.4 1.5 1.6 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Clearing a Password . . . . . . . . . . . . . . . . . . . . . . . . 112 Power Management . . . . . . . . . . . . . . . . . . . . . . . . 113 Notebook External Components . . . . . . . . . . . . . . 114 Design Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 124
2 Troubleshooting
2.1 Computer Setup and Diagnostics Utilities . . . . . . . . 21 Selecting Computer Setup or Compaq Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . 21 Selecting from the File Menu. . . . . . . . . . . . . . . . . . 23 Selecting from the Security Menu . . . . . . . . . . . . . . 24 Selecting from the Advanced Menu. . . . . . . . . . . . . 25 2.2 Using Compaq Diagnostics . . . . . . . . . . . . . . . . . . . 27 Obtaining, Saving, or Printing Configuration Information . . . . . . . . . . . . . . . . . . . . 27 Obtaining, Saving, or Printing Diagnostic Test Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 2.3 Troubleshooting Flowcharts. . . . . . . . . . . . . . . . . . 210
Maintenance and Service Guide
iii
Contents
3 Illustrated Parts Catalog
3.1 Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 31 3.2 Notebook System Major Components . . . . . . . . . . . 32 3.3 Miscellaneous Plastics/Hardware Kit Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 3.4 Miscellaneous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312
4 Removal and Replacement Preliminaries
4.1 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 Service Considerations. . . . . . . . . . . . . . . . . . . . . . . Plastic Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . . 4.3 Preventing Damage to Removable Drives . . . . . . . . 4.4 Preventing Electrostatic Damage . . . . . . . . . . . . . . . 4.5 Packaging and Transporting Precautions . . . . . . . . . 4.6 Workstation Precautions . . . . . . . . . . . . . . . . . . . . . 4.7 Grounding Equipment and Methods . . . . . . . . . . . . 41 42 42 42 43 44 44 45 46
5 Removal and Replacement Procedures
5.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 5.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . 52 5.3 Preparing the Notebook for Disassembly. . . . . . . . . 54 5.4 Notebook Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.5 Memory Expansion Board . . . . . . . . . . . . . . . . . . . . 59 5.6 Optical Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 512 5.7 LED Switch Cover . . . . . . . . . . . . . . . . . . . . . . . . . 513 5.8 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 515 5.9 Heat Sink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518 5.10 Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 521 5.11 Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522 5.12 Display Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 524 5.13 Top Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 527
iv
Maintenance and Service Guide
Contents
5.14 1394 Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.15 Modem Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.16 System Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.17 Real Time Clock (RTC) Battery . . . . . . . . . . . . . .
532 534 536 538
6 Specifications A Connector Pin Assignments B Power Cord Set Requirements
3-Conductor Power Cord Set . . . . . . . . . . . . . . . . . . . . . . B1 General Requirements . . . . . . . . . . . . . . . . . . . . . . . B1 Country-Specific Requirements . . . . . . . . . . . . . . . . . . . . B2
C Screw Listing Index
Maintenance and Service Guide
v
1
Product Description
The Compaq 800 and Presario 3000 Series Mobile PCs feature Intel Pentium 4 processors, an industry-leading SiS Accelerated Graphics Port (AGP) graphics processor, a 16-inch SXGA display, and a wide range of multimedia capabilities.
Figure 1-1. Compaq 800 and Presario 3000 Series Mobile PC
Maintenance and Service Guide
11
Product Description
1.1 Models
Notebook models are shown in Tables 1-1 through 1-3.
Table 1-1 Compaq 800 and Presario 3000 Model Naming Conventions
Key C800 1 Key 1 2 3 P 2 Description Brand/Series designator Processor type Processor speed 306 3 S6 4 80 5 W 6 C 7 10 8 E 9 XXXXXX-XXX 10
Options C800 = 800 Series P = Intel Pentium 4 306 = 3.06 GHz 280 = 2.8 GHz 240 = 2.4 GHz P3000 = Presario 3000 Series C = Intel Celeron 200 = 2.0 GHz 180 = 1.8 GHz 170 = 1.7 GHz 6 = 16.x in 5 = 15.x in 4 = 14.x in 3 = 13.x in
4
Display type/ size/resolution
S = SXGA (1268 × 1024) X = XGA (1024 × 768)
5 6 7 8 9 10
Hard drive size Optical drive designator Integrated communication RAM Operating system SKU#
80 = 80 MB 60 = 60 MB D = CD-ROM drive V = DVD-ROM drive M = modem 0 = none 10 = 1024 MB 51 = 512 MB
40 = 40 GB 20 = 20 GB W = combination DVD/CD-RW drive C = modem/NIC combination card 25 = 256 MB 12 = 128 MB
E = Microsoft Windows XP Home
12
Maintenance and Service Guide
Product Description
Table 1-2 Compaq 800 Models
The following Compaq 800 models feature:
TouchPad pointing device 56KB/s modem and 10/100 NIC 1-year warranty on parts and labor Microsoft Windows XP Home 90W AC adapter 4.0 AH lithium ion (Li ion) battery pack
The following Compaq 800 model uses config. code LN64. C800 Asia Pacific P 240 S6 40 W C 25 E
322539-371
The following Compaq 800 models use config. code LLNB. C800 Hong Kong Korea P 240 S6 30 W C 25 E 317417-281
317471-AC1 317471-AD1
Thailand
The following Compaq 800 model uses config. code LN63. C800 Asia Pacific P 240 X5 30 W C 25 E
322538-371
The following Compaq 800 model uses config. code LLN8. C800 P 200 X4 30 V C 25 E
People's Republic of China
315612-AA1
The following Compaq 800 models use config. code LLN6. C800 P 200 X4 20 V C 12 E 315610-AA1
Asia Pacific Australia/New Zealand Hong Kong Korea
315610-371 315610-011 315610-AC1 315610-AD1
People's Republic of China Taiwan Thailand
315610-AB1 315610-281
Maintenance and Service Guide
13
Product Description
Table 1-2 Compaq 800 Models (Continued)
The following Compaq 800 model uses config. code LLNF. C800 Korea P 180 X5 20 D C 25 E
317474-AD1
The following Compaq 800 model uses config. code LLNC. C800 P 180 X4 20 V C 12 E
People's Republic of China
317472-AA1
The following Compaq 800 model uses config. code LLND. C800 Korea P 180 X4 20 V C 12 E
317473-AD1
The following Compaq 800 model uses config. code LLN7. C800 P 180 X4 20 D C 12 E
People's Republic of China
315611-AA1
The following Compaq 800 models use config. code LMS2. C800 C 180 X4 20 D C 12 E 321485-AA1
Asia Pacific Australia/New Zealand Hong Kong Korea
321485-371 321485-011 321485-AC1 321485-AD1
People's Republic of China Taiwan Thailand
321485-AB1 321485-281
The following Compaq 800 model uses config. code LN65. C800 India C 180 X4 20 D C 12 E
322629-D61
The following Compaq 800 model uses config. code LN66. C800 India C 170 X4 20 D C 12 E
322630-D61
14
Maintenance and Service Guide
Product Description
Table 1-2 Compaq 800 Models (Continued)
The following Compaq 800 models feature:
TouchPad pointing device 56KB/s modem and 10/100 NIC 1-year warranty on parts and labor Microsoft Windows XP Home 90W AC adapter No battery pack
The following Compaq 800 models use config. code LF56. C800 Asia Pacific P 240 S6 30 W C 25 E 316503-011
316503-371
Australia/New Zealand
The following Compaq 800 model uses config. code LN67. C800 Taiwan P 200 S6 40 V C 25 E
324627-AB1
The following Compaq 800 model uses config. code LN68. C800 Korea P 200 X5 30 V C 25 E
325439-AD1
The following Compaq 800 models use config. code LLN8. C800 P 200 X4 30 V C 25 E 315612-AD1 315612-AB1 315612-281
Asia Pacific Australia/New Zealand Hong Kong
315612-371 315612-011 315612-AC1
Korea Taiwan Thailand
The following Compaq 800 model uses config. code LMS4. C800 Asia Pacific P 200 X4 20 V C 12 E
321487-371
The following Compaq 800 model uses config. code LMS1. C800 Asia Pacific P 200 X4 20 D C 12 E
319562-371
Maintenance and Service Guide
15
Product Description
Table 1-2 Compaq 800 Models (Continued)
The following Compaq 800 models use config. code LF55. C800 Asia Pacific P 200 X3 20 D C 12 E 317495-011
317495-371
Australia/New Zealand
The following Compaq 800 model uses config. code LLNG. C800 Hong Kong P 180 X4 30 W C 25 E
317475-AC1
The following Compaq 800 model uses config. code LLNH. C800 Taiwan P 180 X4 30 V C 12 E
317476-AB1
The following Compaq 800 model uses config. code LLNC. C800 Asia Pacific P 180 X4 20 V C 12 E
317472-371
The following Compaq 800 models use config. code LLN7. C800 P 180 X4 20 D C 12 E 315611-AD1 315611-AB1 315611-281
Asia Pacific Australia/New Zealand Hong Kong
315611-371 315611-011 315611-AC1
Korea Taiwan Thailand
The following Compaq 800 models use config. code LF54. C800 Asia Pacific P 180 X3 20 V C 25 E 309482-011
309482-371
Australia/New Zealand
The following Compaq 800 models use config. code LF57. C800 Asia Pacific P 180 X3 20 D C 12 E 310535-011
310535-371
Australia/New Zealand
16
Maintenance and Service Guide
Product Description
Table 1-2 Compaq 800 Models (Continued)
The following Compaq 800 models use config. code LF53. C800 Asia Pacific P 180 X3 20 D C 12 E 307602-011
307602-371
Australia/New Zealand
The following Compaq 800 models use config. code LMS3. C800 Asia Pacific C 170 X4 20 V C 12 E 321486-281
321486-371
Thailand
The following Compaq 800 models use config. code LLN9. C800 Asia Pacific C 170 X4 20 D C 12 E 317470-281
317470-371
Thailand
The following Compaq 800 model uses config. code LN61 and includes a USB external diskette drive. C800 C 170 X3 20 D C 25 E
Australia/New Zealand
322537-011
The following Compaq 800 model uses config. code LN62. C800 C 170 X3 20 D C 25 E
Australia/New Zealand
322628-011
Maintenance and Service Guide
17
Product Description
Table 1-3 Compaq Presario 3000 Models
The following Compaq Presario 3000 model uses config. code LLN2 and features:
TouchPad pointing device 56KB/s modem and 10/100 NIC Bluetooth wireless Local Area Network 1-year warranty on parts and labor Microsoft Windows XP Home 4.0 AHr Li ion battery pack 120W AC adapter P 306 S6 60 W C 51 E
P3020
United States
314615-001
The following Compaq Presario 3000 model uses config. code LLN3 and features:
TouchPad pointing device 56KB/s modem and 10/100 NIC Bluetooth wireless Local Area Network 1-year warranty on parts and labor Microsoft Windows XP Home 4.0 AHr Li ion battery pack 90W AC adapter P 280 S6 60 W C 51 E
P3017
United States
315601-001
The following Compaq Presario 3000 model uses config. code LLN5 and features:
TouchPad pointing device 56KB/s modem and 10/100 NIC Bluetooth wireless Local Area Network 1-year warranty on parts and labor Microsoft Windows XP Home 4.0 AHr Li ion battery pack 90W AC adapter P 280 S6 80 W C 10 E
P3019
United States
315603-001
18
Maintenance and Service Guide
Product Description
Table 1-3 Compaq Presario 3000 Models (Continued)
The following Compaq Presario 3000 model uses config. code LF51 and features: TouchPad pointing device 56KB/s modem and 10/100 NIC 1-year warranty on parts and labor Microsoft Windows XP Home 4.0 AHr Li ion battery pack 90W AC adapter P3008 P 240 S6 40 W C 51 E
United States
315955-001
The following Compaq Presario 3000 model uses config. code LLN1 and features: TouchPad pointing device 56KB/s modem and 10/100 NIC 1-year warranty on parts and labor Microsoft Windows XP Home 4.0 AHr Li ion battery pack 90W AC adapter P3015 P 240 S6 60 W C 51 E
United States
314614-001
The following Compaq Presario 3000 model uses config. code LMR3 and features:
TouchPad pointing device 56KB/s modem and 10/100 NIC 1-year warranty on parts and labor Microsoft Windows XP Home 4.0 AHr Li ion battery pack 90W AC adapter P 240 S6 60 W C 51 E
P3015
United States
321457-001
Maintenance and Service Guide
19
Product Description
Table 1-3 Compaq Presario 3000 Models (Continued)
The following Compaq Presario 3000 model uses config. code LF52 and features: TouchPad pointing device 56KB/s modem and 10/100 NIC 1-year warranty on parts and labor Microsoft Windows XP Home 4.0 AHr Li ion battery pack P3005 P 200 S6 40 W C 51 E
United States
307601-001
1.2 Features
The following processors are available, varying by notebook model:
The Compaq 800 features a 2.4-, 2.0-, or 1.8-GHz Intel Pentium 4 processor with 512-KB integrated L2 cache, or a 1.8- or 1.7-GHz Intel Celeron processor with 256-KB integrated L2 cache The Compaq Presario 3000 features a 3.06-, 2.8-, 2.4-, or 2.0-GHz Intel Pentium 4 processor with 512-KB integrated L2 cache
A minimum of 128-MB high-performance Synchronous DRAM (SDRAM), expandable to 1.0 GB Microsoft Windows XP Home 16.0-inch SXGA (1280 × 1024) or 15.0-, 14.1-, or 13.3-inch XGA (1024 × 768), TFT display with over 16.7 million colors, varying by notebook model SiS 4X Accelerated Graphics Port (AGP) graphics processor with 32 or 64 MB DDR shared video memory Full-size Windows 98 keyboard with TouchPad pointing device
Maintenance and Service Guide
110
Product Description
10/100 network interface card (NIC) and 56KB/s V.92 modem integrated on the system board AC Link audio 12-cell Li ion or 10-cell NiMH battery pack Support for the following optical drives:
8X Max DVD-ROM drive 8X Max DVD-CD/RW combination drive
Support for one Type I PC Card slot with support for both 32-bit CardBus and 16-bit PC Cards External 120 or 90 W AC adapter with 3-wire power cord 80-, 60-, 40-, or 20-GB high-capacity hard drive, varying by notebook model Connectors for:
Stereo line out/headphone Mono microphone Infrared Parallel devices External monitor RJ-45 network Universal Serial Bus 2.0 (4) TV out
RJ-11 modem AC power IEEE-1394 digital
Maintenance and Service Guide
111
Product Description
1.3 Clearing a Password
If the notebook you are servicing has an unknown password, follow these steps to clear the password. These steps also clear CMOS: 1. Prepare the notebook for disassembly (refer to Section 5.3, "Preparing the Notebook for Disassembly," for more information). 2. Remove the real time clock (RTC) battery (refer to Section 5.16, "RTC Battery"). 3. Wait approximately five minutes. 4. Replace the RTC battery and reassemble the notebook. 5. Connect AC power to the notebook. Do not reinsert any battery packs at this time. 6. Turn on the notebook. All passwords and all CMOS settings have been cleared.
112
Maintenance and Service Guide
Product Description
1.4 Power Management
The notebook comes with power management features that extend battery operating time and conserve power. The notebook supports the following power management features:
Suspend Hibernation Setting customization by the user Hotkeys for setting level of performance Smart battery that provides an accurate battery power gauge Battery calibration Lid switch Suspend/resume Power/Suspend button Advanced Configuration and Power Management (ACP) compliance
Maintenance and Service Guide
113
Product Description
1.5 Notebook External Components
The external components on the front and right side of the notebook are shown in Figure 1-2 and described in Table 1-4.
.
Figure 1-2. Front and Right Side Components
Table 1-4 Front and Right Side Components
Item 1 2 Component Display release latch Power/Standby light Function Opens the notebook. On: Power is turned on. Off: Power is turned off. Blinking: Notebook is in Standby mode.
114
Maintenance and Service Guide
Product Description
Table 1-4 Front and Right Side Components (Continued)
Item 3 Component Battery light Function On: A battery pack is charging. Blinking: A battery pack that is the only available power source has reached a low-battery condition. Adjust the volume of the stereo speakers. Connects a mono microphone, disabling the built-in microphone. Connects stereo speakers, headphones, headset, or television audio. Accepts optical devices, such as a CD-ROM, DVD-ROM, or CD-RW drive. Ejects a PC Card from the PC Card slot. Supports a 32-bit (CardBus) or 16-bit PC Card.
4 5 6 7 8 9
Volume control buttons Mono microphone jack Stereo speaker/ headphone jack Optical drive PC Card eject button PC Card slot
Maintenance and Service Guide
115
Product Description
The notebook rear panel and left side components are shown in Figure 1-3 and described in Table 1-5.
Figure 1-3. Rear Panel and Left Side Components
Table 1-5 Rear Panel and Left Side Components
Item 1 Component Infrared port Function Provides wireless communication between the notebook and other infrared-equipped devices using an infrared beam. Connects a parallel device. Connects an external monitor or overhead projector.
2 3
Parallel connector External monitor connector
116
Maintenance and Service Guide
Product Description
Table 1-5 Rear Panel and Left Side Components (Continued)
Item 4 Component Network connection lights (2) Function Both lights off: The notebook is not connected to a LAN. Both lights on: The notebook is connected to a LAN with a 100 MB/s link. Green light on and yellow light off: The notebook is connected to a LAN with a 10 MB/s link. Green light flashing: Information is transmitting through the LAN. Connects the network cable. A network cable is not included with the notebook. Connect USB devices. Connects a television, VCR, camcorder, or overhead projector. Connects the modem cable to an internal modem. A modem cable is included with internal modem models. Connects any one of the following: AC adapter Optional automobile power adapter/charger Optional aircraft power adapter
5 6 7 8
RJ-45 network jack USB ports (4) Composite TV connector RJ-11 modem jack
9
DC power connector
10 11
Security cable slot Hard drive bay
Attaches an optional security cable to the notebook. Supports the removable primary hard drive. The hard drive is secured to the notebook by four screws. Connects IEEE 1394-compliant products, such as digital camcorders, video editing equipment, VCRs, cameras, and audio players. A 1394 firewire cable is required for use with this connector.
12
1394 connector
Maintenance and Service Guide
117
Product Description
The notebook keyboard components are shown in Figure 1-4 and described in Table 1-6.
Figure 1-4. Keyboard Components
Table 1-6 Keyboard Components
Item 1 2 Component Function Perform preset functions. On: Num lock is on and the embedded numeric keypad is enabled.
F1 through F12
function keys
Num lock key
118
Maintenance and Service Guide
Product Description
Table 1-6 Keyboard Components (Continued)
Item 3 4 Component Function Used with hotkeys to perform preset hotkey functions. Displays a menu when using a Microsoft application. The menu is the same one that is displayed by pressing the right mouse button. Display the Windows Start menu. Converts keys to numeric keypad. Move the cursor around the screen.
Fn key
Application key
5 6 7
Windows logo keys Embedded numeric keypad Cursor control keys
Maintenance and Service Guide
119
Product Description
The notebook top components are shown in Figure 1-5 and described in Table 1-7.
Figure 1-5. Top Components
Table 1-7 Top Components
Item 1 Component Power button Function Turns on the notebook. Use the operating system Shut Down command to turn off the notebook. Off: The internal wireless LAN is off or not installed. On: The internal wireless LAN is on and connected to a network. Flashing: The internal wireless LAN is on, but is not connected to a network or properly configured.
2
Wireless LAN activity light
120
Maintenance and Service Guide
Product Description
Table 1-7 Top Components (Continued)
Item 3 Component Power light Function On: Power is turned on. Blinking: Notebook is in Standby. The power light also blinks if a battery pack that is the only available power source reaches a low-battery condition. Turns on when the hard drive, CD-, or DVD-ROM drive is accessed. On: Num lock is on and the embedded numeric keypad is enabled. On: Caps lock is on. Turns off the notebook display if the notebook is closed while on. Produce stereo sound. Moves the mouse cursor, selects, and activates. Function like the left and right mouse buttons on an external mouse. On: A battery pack is charging. Blinking: A battery pack that is the only available power source has reached a low-battery condition. On: Power is turned on. Off: Power is turned off. Blinking: Notebook is in Standby.
4 5 6 7 8 9 10 11
Drive indicator light Num lock light Caps lock light Display lid switch Stereo speakers TouchPad TouchPad buttons Battery light
12
Power/Standby light
Maintenance and Service Guide
121
Product Description
The external components on the bottom of the notebook are shown in Figure 1-6 and described in Table 1-8.
Figure 1-6. Bottom Components
Table 1-8 Bottom Components
Item 1 Component Vent Function Allows airflow to cool internal components. CAUTION: To prevent damage, the notebook shuts down if an overheating condition occurs. Do not block the cooling vent. Avoid placing the notebook on a blanket, rug, or other flexible surface that may cover the vent area. Supports the primary hard drive. The hard drive is secured to the notebook by four screws.
Ä
2
Hard drive bay
122
Maintenance and Service Guide
Product Description
Table 1-8 Bottom Components (Continued)
Item 3 Component Battery pack lock latches Function Secure the battery pack and battery compartment space saver in the battery compartment. Accepts an 8-cell Li ion battery pack or battery compartment space saver. Releases the battery pack from the battery compartment. Covers the memory expansion compartment that contains two memory expansion slots for memory expansion boards. Accepts a CD-ROM, CD-RW, DVD-ROM, or DVD/CD-RW drive.
4
Battery bay
5 6
Battery pack release switch Memory expansion compartment
7
Optical drive bay
Maintenance and Service Guide
123
Product Description
1.6 Design Overview
This section presents a design overview of key parts and features of the notebook. Refer to Chapter 3, "Illustrated Parts Catalog," to identify replacement parts, and Chapter 5, "Removal and Replacement Procedures," for disassembly steps. The system board provides the following device connections:
Memory expansion board Hard drive Display Keyboard and TouchPad Audio Intel Pentium 4 and Celeron processors Fan PC Card Modem or modem/NIC
The notebook uses an electrical fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software applications. Exhaust air is displaced through the ventilation grill located on the left side of the notebook.
Ä
CAUTION: To properly ventilate the notebook, allow at least a 7.6-cm (3-inch) clearance around all sides of the notebook.
124
Maintenance and Service Guide
2
Troubleshooting
Å
WARNING: Only authorized technicians trained by Compaq should repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassembly/module level repair. Because of the complexity of the individual boards and subassemblies, no one should attempt to make repairs at the component level or to make modifications to any printed wiring board. Improper repairs can create a safety hazard. Any indication of component replacement or printed wiring board modification may void any warranty or exchange allowances.
2.1 Computer Setup and Diagnostics Utilities
Selecting Computer Setup or Compaq Diagnostics
The notebook features two Compaq system management utilities:
Computer Setup--A system information and customization utility that can be used even when your operating system is not working or will not load. This utility includes settings that are not available in Windows.
Maintenance and Service Guide
21
Troubleshooting
Compaq Diagnostics--A system information and diagnostic utility that is used within your Windows operating system. Use this utility whenever possible to:
Display system information. Test system components. Troubleshoot a device configuration problem in Windows 2000, Windows XP Professional, or Windows XP Home.
to configure device to a It is not necessarynotebook or ana optionalconnectedbase.USB connector on the docking
Using Computer Setup
Information and settings in Computer Setup are accessed from the File, Security, or Advanced menus: 1. Turn on or restart the notebook. Press F10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen.
To change the language, press F2. To view navigation information, press F1. To return to the Computer Setup menu, press esc.
2. Select the File, Security, or Advanced menu. 3. To close Computer Setup and restart the notebook:
Select File > Save Changes and Exit and press enter. Select File > Ignore Changes and Exit and press enter.
or
4. When you are prompted to confirm your action, press F10.
22
Maintenance and Service Guide
Troubleshooting
Selecting from the File Menu
Table 2-1 File Menu Select
System Information
To Do This
View identification information about the notebook, a docking base, and any battery packs in the system. View specification information about the processor, memory and cache size, and system ROM.
Save to Floppy Restore from Floppy Restore Defaults
Save system configuration settings to a diskette. Restore system configuration settings from a diskette. Replace configuration settings in Computer Setup with factory default settings. (Identification information is retained.) Cancel changes entered during the current session, then exit and restart the notebook. Save changes entered during the current session, then exit and restart the notebook.
Ignore Changes and Exit Save Changes and Exit
Maintenance and Service Guide
23
Troubleshooting
Selecting from the Security Menu
Table 2-2 Security Menu Select
Setup Password
To Do This
Enter, change, or delete a setup password. (The setup password is called an administrator password in Compaq Computer Security, a program accessed from the Windows Control Panel.) Enter, change, or delete a power-on password. Enable/disable DriveLock; change a DriveLock User or Master password. Settings are accessible only DriveLock enter Computer Setup by when you turning on (not restarting) the notebook.
Power-on Password DriveLock Passwords
Password Options Password options can be selected only when a power-on password has been set.
Enable/disable:
QuickLock QuickLock on Suspend QuickBlank
To enable QuickLock on Suspend or QuickBlank, you must first enable
QuickLock. Enable/disable:
Device Security
Ports or diskette drives* Diskette write* CD-ROM or diskette startup
for a can Settingsin theDVD-ROMfield. be entered CD-ROM System IDs Enter identification numbers for the notebook, a docking base, and all battery packs in the system.
*Not applicable to SuperDisk LS-120 drives.
24
Maintenance and Service Guide
Troubleshooting
Selecting from the Advanced Menu
Table 2-3 Advanced Menu Select
Language (or press F2) Boot Options
To Do This
Change the Computer Setup language. Enable/disable:
QuickBoot, which starts the notebook more quickly by eliminating some startup tests. (If you suspect a memory failure and want to test memory automatically during startup, disable QuickBoot.) MultiBoot, which sets a startup sequence that can include most bootable devices and media in the system. Enable/disable the embedded numeric keypad at startup. Enable/disable multiple standard pointing devices at startup. (To set the notebook to support only a single, usually nonstandard, pointing device at startup, select Disable.) Enable/disable USB legacy support for a USB keyboard. (When USB legacy support is enabled, the keyboard works even when a Windows operating system is not loaded.) Set an optional external monitor or overhead projector connected to a video card in a docking base as the primary device. (When the notebook display is set as secondary, the notebook must be shut down before undocking from a docking base.)
Device Options
Maintenance and Service Guide
25
Troubleshooting
Table 2-3 Advanced Menu (Continued) Select
Device Options (continued)
To Do This
Change the parallel port mode from EPP (Enhanced Parallel Port [default]) to standard, bidirectional, EPP or ECP (Enhanced Capabilities Port). Set video-out mode to NTSC (default), PAL, NTSC-J, or PAL-M.* Enable/disable all settings in the SpeedStep window. (When Disable is selected, the notebook runs in Battery Optimized mode.) Specify how the notebook recognizes multiple identical docking bases that are identically equipped. (Select Disable to recognize the docking bases as a single docking base; select Enable to recognize the docking bases individually, by serial number.) Enable/disable the reporting of the processor serial number by the processor to the software.
HDD Self-Test Options
Run a quick comprehensive self-test on hard drives in the system that support the test features.
*Video modes vary even within regions. However, NTSC is common in North America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and PAL-M, in Brazil. Other South and Central American regions may use NTSC, PAL, or PAL-M.
26
Maintenance and Service Guide
Troubleshooting
2.2 Using Compaq Diagnostics
When you access Compaq Diagnostics, a scan of all system components is displayed on the screen before the Compaq Diagnostics window opens. You can display more or less information from anywhere within Compaq Diagnostics by selecting Level on the menu bar. Compaq Diagnostics is designed to test Compaq components. If non-Compaq components are tested, the results may be inconclusive.
Obtaining, Saving, or Printing Configuration Information
1. Access Compaq Diagnostics by selecting Start > Settings > Control Panel > Compaq Diagnostics. 2. Select Categories, then select a category from the drop-down list.
To save the information, select File > Save As. To print the information, select File > Print.
3. To close Compaq Diagnostics, select File > Exit.
Maintenance and Service Guide
27
Troubleshooting
Obtaining, Saving, or Printing Diagnostic Test Information
1. Access Compaq Diagnostics by selecting Start > Settings > Control Panel > Compaq Diagnostics. 2. Select the Test tab. 3. In the scroll box, select the category or device you want to test. 4. Select a test type:
Quick Test--Runs a quick, general test on each device in a selected category. Complete Test--Performs maximum testing on each device in a selected category. Custom Test--Performs maximum testing on a selected device.
To run all tests for your selected device, select the Check All button. To run only the tests you select, select the Uncheck All button, then select the checkbox for each test you want to run.
5. Select a test mode:
Interactive Mode--Provides maximum control over the testing process. You determine whether the test was passed or failed and may be prompted to insert or remove devices. Unattended Mode--Does not display prompts. If errors are found, they are displayed when testing is complete.
28
Maintenance and Service Guide
Troubleshooting
6. Select the Begin Testing button. 7. Select a tab to view a test report:
Status tab--Summarizes the tests run, passed, and failed during the current testing session. Log tab--Lists tests run on the system, the number of times each test has run, the number of errors found on each test, and the total run time of each test. Error tab--Lists all errors found in the notebook with their error codes. Log tab--Select the Log tab Save button. Error tab--Select the Error tab Save button. Log tab--Select File > Save As, then print the file from your folder.
8. Select a tab to save the report:
9. Select a tab to print the report:
Maintenance and Service Guide
29
Troubleshooting
2.3 Troubleshooting Flowcharts
Table 2-4 Troubleshooting Flowcharts Overview
Flowchart 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 Description Initial troubleshooting No power, part 1 No power, part 2 No power, part 3 No power, part 4 No video, part 1 No video, part 2 Nonfunctioning docking station No operating system (OS) loading No OS loading from hard drive, part 1 No OS loading from hard drive, part 2 No OS loading from hard drive, part 3 No OS loading from CD- or DVD-ROM drive No audio, part 1 No audio, part 2 Nonfunctioning device Nonfunctioning keyboard Nonfunctioning pointing device No network or modem connection
210
Maintenance and Service Guide
Troubleshooting
Flowchart 2.1--Initial Troubleshooting
Begin troubleshooting.
N
Is there power? Go to Section 2.2, No Power.
Y N
Beeps, LEDs, or error messages? Check LED board, speaker connections. All drives working?
N
Go to Section 2.16, Nonfunctioning Device.
Y N
Is there video? (no boot) Go to Section 2.6, No Video.
Y N
Keyboard/ pointing device working? Go to Section 2.17, Nonfunctioning Keyboard, or Section 2.18, Nonfunctioning Pointing Device.
Y N
Is the OS loading? Go to Section 2.9, No OS Loading.
Y N
Connecting to network or modem?
Y N
Is there sound? Go to Section 2.15, No Audio.
Go to Section 2.19, No Network or Modem.
Y
End
Y
Maintenance and Service Guide
211
Troubleshooting
Flowchart 2.2--No Power, Part 1
No Power (power LED is off).
Remove from docking station (if applicable).
N
Power up on battery power? *Reset power. Power up on battery power?
N
Go to Section 2.3, No Power, Part 2.
Y N
Power up on AC power? *Reset power.
Y N
Power up on AC power? Go to Section 2.4, No Power, Part 3.
Y Y
Power up in docking station? Done
Y
N
1. Reseat the power cables in the docking station and at the AC outlet. 2. Ensure the AC power source is active. 3. Ensure that the power strip is working.
*NOTES: 1. On some models there is a separate reset button. 2. On some models the notebook may be reset using the Suspend switch and either the lid switch or the main power switch.
Y
Done Power up in docking station?
N
Go to Section 2.8, Nonfunctioning Docking Station.
212
Maintenance and Service Guide
Troubleshooting
Flowchart 2.3--No Power, Part 2
Continued from Section 2.2, No Power, Part 1.
Visually check for debris in battery socket and clean if necessary.
Y
Power on? Done
N
Check battery by recharging, moving it to another notebook, or replacing it.
N
Power on? Replace power supply (if applicable).
Y N
Done Power on? Go to Section 2.4, No Power, Part 3.
Y
Done
Maintenance and Service Guide
213
Troubleshooting
Flowchart 2.4--No Power, Part 3
Continued from Section 2.3, No Power, Part 2. Plug directly into AC outlet.
Y
Power LED on? Done
N
Reseat AC adapter in notebook and at power source.
Y
Power on? Done
N N
Power outlet active? Try different outlet. External Internal or external AC adapter? Internal Replace power cord. Go to Section 2.5, No Power, Part 4. Replace external AC adapter.
Y
N
Power on?
Y
Power on? Done
Y
Done
N
214
Maintenance and Service Guide
Troubleshooting
Flowchart 2.5--No Power, Part 4
Continued from Section 2.4, No Power, Part 3.
Open notebook.
Y
Loose or damaged parts?
N
Close notebook and retest.
Reseat loose components and boards and replace damaged items.
N
Power on? Replace the following items (if applicable). Check notebook operation after each replacement: 1. Internal DC-DC converter* 2. Internal AC adapter 3. Processor board* 4. System board* Done *NOTE: Replace these items as a set to prevent shorting out among components.
Y
Maintenance and Service Guide
215
Troubleshooting
Flowchart 2.6--No Video, Part 1
No Video. Docking Station Standalone or Docking Station? Stand-alone Internal or external display*? External Adjust brightness. Adjust brightness. Internal Go to Section 2.7, No Video, Part 2. *NOTE: To change from internal to external display, use the hotkey combination.
Y
Video OK? Done
N
A
Y
Press lid switch to ensure operation.
Y
Done Video OK? Done
Video OK?
N
Check for bent pins on cable.
N
Replace the following one at a time. Test after each replacement. 1. Cable between notebook and notebook display (if applicable) 2. Inverter board (if applicable) 3. Display 4. System board
N
Video OK? Try another display. Internal and external video OK?
N
Replace system board.
Y
Done
Y
Done
216
Maintenance and Service Guide
Troubleshooting
Flowchart 2.7--No Video, Part 2
Continued from Section 2.6, No Video, Part 1.
Remove notebook from docking station, if connected.
Adjust display brightness.
Check brightness of external monitor.
N
Video OK? Go to "A" in Section 2.6, No Video, Part 1. Video OK?
Y
Done
Y
Check that notebook is properly seated in docking station, for bent pins on cable, and for monitor connection.
N
Try another external monitor.
Y
Video OK? Done Internal and external video OK?
Y
Done
N
N
Go to Section 2.8, Nonfunctioning Docking Station.
Adjust external monitor display.
Maintenance and Service Guide
217
Troubleshooting
Flowchart 2.8--Nonfunctioning Docking Station (if applicable)
Nonfunctioning Docking Station.
Reseat power cord in docking station and power outlet.
Check voltage setting on docking station.
Reinstall notebook into docking station.
Y
Reset monitor cable connector at docking station. Docking station operating? Done
N Y
Docking station operating? Done Replace the following docking station components one at a time. Check notebook operation after each replacement. 1. Power supply 2. I/O board 3. Backplane board 4. Switch box 5. Docking motor mechanism
N
Remove notebook, reseat all internal parts, and replace any damaged items in docking station.
218
Maintenance and Service Guide
Troubleshooting
Flowchart 2.9--No Operating System (OS) Loading
No OS Loading.*
Reseat power cord in docking station and power outlet. No OS loading from hard drive, go to Section 2.10. No OS loading from CD- or DVD-ROM drive, go to Section 2.13. No OS loading from network, go to Section 2.19. *NOTE: Before beginning troubleshooting, always check cable connections, cable ends, and drives for bent or damaged pins.
Maintenance and Service Guide
219
Troubleshooting
Flowchart 2.10--No OS Loading from Hard Drive, Part 1
OS not loading from hard drive.
Y
Nonsystem disk message?
N
Reseat external hard drive.
Go to Section 2.11, No OS Loading from Hard Drive, Part 2.
Y
OS loading? Done
N N
Boot from CD?
Y
Check the setup utility for correct booting order. Change boot priority through the setup utility and reboot.
N
Boot from hard drive?
Y
Done
Y
Boot from hard drive?
N
Go to Section 2.16, Nonfunctioning Device.
220
Maintenance and Service Guide
Troubleshooting
Flowchart 2.11--No OS Loading from Hard Drive, Part 2
Continued from Section 2.10, No OS Loading from Hard Drive, Part 1.
Reseat hard drive.
N
CD or diskette in drive? 1. Replace hard drive. 2. Replace system board.
Y
Hard drive accessible? Done
Y N
Remove diskette and reboot.
Run FDISK.
Y
Boot from hard drive? Done Hard drive partitioned?
N
Create partition, then format hard drive to bootable C:\ prompt.
N
Y N
Hard drive formatted?
Y
Hard drive accessible?
Y
Notebook booted? Done
Format hard drive and bring to a bootable C:\ prompt.
Y
Go to Section 2.12, No OS Loading from Hard Drive, Part 3.
N
Go to Section 2.12, No OS Loading from Hard Drive, Part 3.
Load OS using Restore CD (if applicable).
Maintenance and Service Guide
221
Troubleshooting
Flowchart 2.12--No OS Loading from Hard Drive, Part 3
Continued from Section 2.11, No OS Loading from Hard Drive, Part 2.
N
System files on hard drive? Install OS and reboot.
Y Y
Virus on hard drive? Clean virus. OS loading from hard drive?
Y
Done
N
Run SCANDISK and check for bad sectors.
N Y
Diagnostics on diskette? Replace hard drive.
N N
Can bad sectors be fixed? Replace hard drive. Run diagnostics and follow recommendations.
Y N
Fix bad sectors. Boot from hard drive? Replace hard drive.
Y
Done
222
Maintenance and Service Guide
Troubleshooting
Flowchart 2.13--No OS Loading from CD- or DVD-ROM Drive
No OS Loading from CD- or DVD-ROM Drive.
Y
Disc in drive? Bootable disc in drive?
N
N
Install bootable disc.
Y
Try another bootable disc.
Install bootable disc and reboot notebook.
Y
Boots from CD or DVD? Done
N Y
Reseat drive. Boots from CD or DVD? Done
N N
Booting from another device? Go to Section 2.16, Nonfunctioning Device. Clear CMOS. Refer to Section 1.3, "Clearing a Password," for instructions.
Y Y
Booting order correct?
N
Correct boot order using the setup utility.
Go to Section 2.16, Nonfunctioning Device.
Maintenance and Service Guide
223
Troubleshooting
Flowchart 2.14--No Audio, Part 1
Y
No Audio. Turn up audio internally or externally. Audio? Done
N
Y
Notebook in docking station (if applicable)? Undock Internal audio?
N
Go to Section 2.15, No Audio, Part 2.
N
Y
Replace the following docking station components one at a time as applicable. Check after each change. 1. Reseat docking station audio cable. 2. Replace audio cable. 3. Replace speaker. 4. Replace docking station audio board. 5. Replace backplane board. 6. Replace I/O board.
Go to Section 2.15, No Audio, Part 2.
Y
Go to Section 2.16, Nonfunctioning Device. Audio? Done
N
224
Maintenance and Service Guide
Troubleshooting
Flowchart 2.15--No Audio, Part 2
Continued from Section 2.14, No Audio, Part 1.
N
Audio driver in OS configured? Reload audio drivers.
Y N
Correct drivers for application? Load drivers and set configuration in OS.
Y
Connect to external speaker.
N
Audio?
Y
Replace audio board and speaker connections in notebook (if applicable).
Y
Audio? Done
N
1. Replace internal speakers. 2. Replace audio board (if applicable). 3. Replace system board.
Maintenance and Service Guide
225
Troubleshooting
Flowchart 2.16--Nonfunctioning Device
Nonfunctioning device.
Reseat device.
Unplug the nonfunctioning device from the notebook, inspect cables and plugs for bent or broken pins or other damage.
Y
Clear CMOS. Any physical device detected? Fix or replace broken item.
N
Reattach device. Close notebook, plug in power and reboot.
Possible bad hard drive. Replace drive.
Go to Section 2.9, No OS Loading.
N
Device boots properly?
Y
Possible bad NIC. Replace card. If integrated NIC, replace system board.
N
Device boots properly?
Y
Done
Possible bad diskette drive. Replace drive.
Done
226
Maintenance and Service Guide
Troubleshooting
Flowchart 2.17--Nonfunctioning Keyboard
Keyboard not operating properly.
Connect notebook to good external keyboard.
N
External device works? Replace system board.
Y
Reseat internal keyboard connector (if applicable).
N
OK? Replace internal keyboard or cable.
Y Y
Done OK? Done
N
Replace system board.
Maintenance and Service Guide
227
Troubleshooting
Flowchart 2.18--Nonfunctioning Pointing Device
Pointing device not operating properly.
Connect notebook to good external pointing device.
N
External device works? Replace system board.
Y
Reseat internal pointing device connector (if applicable).
N
OK? Replace internal pointing device or cable.
Y Y
Done OK? Done
N
Replace system board.
228
Maintenance and Service Guide
Troubleshooting
Flowchart 2.19--No Network or Modem Connection
No network or modem connection.
N
Network or modem jack active? Replace jack or have jack activated.
Y Y
Digital line? Connect to nondigital line.
N N
NIC/modem configured in OS? Reload drivers and reconfigure. OK?
Y
Done
Y
Disconnect all power from the notebook and open.
N
Replace NIC/modem (if applicable).
Y
Reseat NIC/modem (if applicable). OK? Done
N
Replace system board.
Maintenance and Service Guide
229
3
Illustrated Parts Catalog
This chapter provides an illustrated parts breakdown and a reference for spare part numbers and option part numbers.
3.1 Serial Number Location
When ordering parts or requesting information, provide the notebook serial number and model number located on the bottom of the notebook (Figure 3-1).
Figure 3-1. Serial Number Location
Maintenance and Service Guide
31
Illustrated Parts Catalog
3.2 Notebook System Major Components
Figure 3-2. Notebook System Major Components
32
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1 Spare Parts: Notebook System Major Components
Spare Part Number
Item 1
Description Displays 16.0-inch, SXGA, TFT with wireless antenna (for use only with models with config. code LLN2, LLN3, or LLN5) 16.0-inch, SXGA, TFT without wireless antenna (for use only with models with config. code LF51, LF52, LF56, LLN1, LLNB, LMR3, LN64, and LN67) 15.0-inch, XGA, TFT (for use only with models with config. code LLNF, LN63, and LN68) 14.1-inch, XGA, TFT (for use only with models with config. code LLN6, LLN7, LLN8, LLN9, LLNC, LLND, LLNG, LLNH, LMS1, LMS2, LMS3, LMS4, LN65, and LN66) 13.3-inch, XGA, TFT (for use only with models with config. code LN61 and LN62) Miscellaneous Plastics/Hardware Kit, includes
321941-001
310652-001
316746-001 316745-001
310651-001 310659-001
2a 2b 2c 2d 2e 2f 2g
Left hinge cover Right hinge cover PC Card slot space saver Modem cable Heat sink mounting bracket RTC battery Memory expansion compartment cover not illustrated: display hinge screw covers (2) display bumper pads (2) display screw covers (2 round, 2 oblong) notebook feet (2 round, 2 oblong) LED switch cover 311628-001
3
Maintenance and Service Guide
33
Illustrated Parts Catalog
Figure 3-2. Notebook System Major Components (Continued)
34
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1 Spare Parts: Notebook System Major Components (Continued)
Spare Part Number
Item 4
Description Keyboards Asia Pacific Australia Hong Kong India Japan Korea 310640-371 310640-011 310640-AC1 310640-D61 310640-291 310640-AD1 People's Republic of China Taiwan United States
310640-AA1
310640-AB1 310640-001 310654-001
5 6
Top cover Optical drives 24X Max CD-ROM drive 8X Max DVD-ROM drive 24X Max DVD-ROM/CD-RW combination drive
310660-001 310661-001 310662-001
7
Hard drives 80 GB 60 GB 40 GB 30 GB 20 GB 320038-001 316744-001 310645-001 310644-001 310643-001 310733-001
8
Hard drive carrier with connector
Maintenance and Service Guide
35
Illustrated Parts Catalog
Figure 3-2. Notebook System Major Components (Continued)
36
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1 Spare Parts: Notebook System Major Components (Continued)
Spare Part Number
Item 9
Description Processors Intel Pentium 4 3.06 GHz (for use only with models with config. code LLN2) Intel Pentium 4 2.80 GHz (for use only with models with config. code LLN3 and LLN5) Intel Pentium 4 2.4 GHz (for use only with models with config. code LF51, LF56, LLN1, LLN3, LLNB, LMR3, LN63, or LN64) Intel Pentium 4 2.0 GHz (for use only with models with config. code LF52, LF55, LLN6, LLN8, LMS1, LMS4, LN67, or LN68) Intel Pentium 4 1.8 GHz (for use only with models with config. codes LF53, LF54, LF57, LLN7, LLNC, LLND, LLNF, LLNG, LLNH, or LN65) Intel Celeron 1.8 GHz (for use only with models with config. code LMS2) Intel Celeron 1.7 GHz (for use only with models with config. code LLN9, LMS3, LN61, LN62, or LN66)
316743-001 325826-001 310650-001
310649-001
310648-001
316741-001 320039-001 310647-001 310657-001
10 11
Heat sink Fan
Maintenance and Service Guide
37
Illustrated Parts Catalog
Figure 3-2. Notebook System Major Components (Continued)
38
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1 Spare Parts: Notebook System Major Components (Continued)
Spare Part Number
Item 12
Description System boards 120 watt with wireless communication (for use only with notebook models with config. codes LLN2, LLN3, or LLN5) 90 watt (for use only with notebook models with config. codes other than LLN2, LLN3, or LLN5)
320042-001
310646-001 310653-001 310655-001 310656-001 313579-001 310642-001
13 14 15 16 17
Modem board Base enclosure 1394 board, includes cable Battery bay space saver Battery pack, 12 cell, Li ion
Maintenance and Service Guide
39
Illustrated Parts Catalog
3.3 Miscellaneous Plastics/Hardware Kit Components
Figure 3-3. Miscellaneous Plastics/Hardware Kit Components
310
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-2 Miscellaneous Plastics/Hardware Kit Components Spare Part Number 310659-001
Item 1 2 3 4 5 6 Description Left hinge cover Right hinge cover Modem cable PC Card slot space saver Memory expansion compartment cover Display bumper pads (2) Item 7 8 9 10 11 Description Display hinge screw covers (2) Display screw covers (2 round, 2 oblong) Notebook feet (3 round, 2 oblong) RTC battery Heat sink mounting bracket
Maintenance and Service Guide
311
Illustrated Parts Catalog
3.4 Miscellaneous
Table 3-3 Spare Parts: Miscellaneous (not illustrated)
Spare Part Number
Description AC adapters 120 watt (for use only with notebook models with config. codes LLN2) 90 watt (for use only with notebook models with config. codes other than LLN2) Air adapter cable Auto adapter cable Biometrics reader Bluetooth wireless communication module Logo Kit Memory expansion boards 512 MB 256 MB 128 MB Miscellaneous keyboards Enhanced Essaver, carbon USB, 17-key numeric keypad USB, SmartCard USB wireless, United States
320043-001 309241-001 293204-001 293203-001 153990-001 321717-001 317060-001
280875-001 280874-001 280873-001
118104-001 261636-001 271124-001 252411-001
312
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-3 Spare Parts: Miscellaneous (not illustrated) (Continued)
Spare Part Number 113907-001 164999-001 153994-001
Description Mouse, 2 button, carbon Mouse, USB, carbon PC Card Smartcard reader Power cord, 3-wire Australia Denmark Europe/Middle East/Africa Italy Japan 246959-011 246959-081 246959-021 246959-061 246959-291 Korea Switzerland United Kingdom United States
246959-AD1 246959-AG1 246959-031 246959-001 310658-001
Screw Kit (includes the following screws; refer to Appendix C, "Screw Listing," for more information on screw specifications and usage.)
Torx T8 M2.5 × 16.0 Torx T8 M2.5 × 7.0 Phillips M3.0 × 4.0 Phillips M2.5 × 4.0
Phillips M2.0 × 4.5 Phillips M2.0 × 4.0 Phillips M2.0 × 13.0 294359-001 and 263537-001
Security lock
Maintenance and Service Guide
313
4
Removal and Replacement Preliminaries
This chapter provides essential information for proper and safe removal and replacement service.
4.1 Tools Required
You will need the following tools to complete the removal and replacement procedures:
Magnetic screwdriver Phillips P0 screwdriver Torx T8 screwdriver Tool kit (includes connector removal tool, loopback plugs, and case utility tool)
Maintenance and Service Guide
41
Removal and Replacement Preliminaries
4.2 Service Considerations
The following sections include some of the considerations that you should keep in mind during disassembly and assembly procedures. the As you remove each subassembly from the notebook, place work subassembly (and all accompanying screws) away from the area to prevent damage.
Plastic Parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
Cables and Connectors
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid bending, twisting, or tearing cables. Ensure that cables are routed in such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily.
Ä
CAUTION: When servicing the notebook, ensure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the notebook.
42
Maintenance and Service Guide
Removal and Replacement Preliminaries
4.3 Preventing Damage to Removable Drives
Removable drives are fragile components that must be handled with care. To prevent damage to the notebook, damage to a removable drive, or loss of information, observe the following precautions:
Before removing or inserting a hard drive, shut down the notebook. If you are unsure whether the notebook is off or in Hibernation, turn the notebook on, then shut it down. Before removing a diskette drive or optical drive, ensure that a diskette or disc is not in the drive. Ensure that the optical drive tray is closed. Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid touching the connector. Handle drives on surfaces that have at least one inch of shock-proof foam. Avoid dropping drives from any height onto any surface. After removing a hard drive, CD-ROM drive, or a diskette drive, place it in a static-proof bag. Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers. Avoid exposing a drive to temperature extremes or to liquids. If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective packaging and label the package "Fragile: Handle With Care."
Maintenance and Service Guide
43
Removal and Replacement Preliminaries
4.4 Preventing Electrostatic Damage
Many electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases the discharge contains enough power to alter device parameters or melt silicon junctions. A sudden discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or microcircuitry. Often the spark is neither felt nor heard, but damage occurs. An electronic device exposed to electrostatic discharge may not be affected at all and can work perfectly throughout a normal cycle. Or the device may function normally for a while, then degrade in the internal layers, reducing its life expectancy.
4.5 Packaging and Transporting Precautions
Use the following grounding precautions when packaging and transporting equipment:
To avoid hand contact, transport products in static-safe containers, such as tubes, bags, or boxes. Protect all electrostatic-sensitive parts and assemblies with conductive or approved containers or packaging. Keep electrostatic-sensitive parts in their containers until the parts arrive at static-free workstations. Place items on a grounded surface before removing items from their containers. Always be properly grounded when touching a sensitive component or assembly.
44
Maintenance and Service Guide
Removal and Replacement Preliminaries
Store reusable electrostatic-sensitive parts from assemblies in protective packaging or nonconductive foam. Use transporters and conveyors made of antistatic belts and roller bushings. Ensure that mechanized equipment used for moving materials is wired to ground and that proper materials are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate electric charges.
4.6 Workstation Precautions
Use the following grounding precautions at workstations:
Cover the workstation with approved static-dissipative material (refer to Table 4-2). Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment. Use conductive field service tools, such as cutters, screwdrivers, and vacuums. When using fixtures that must directly contact dissipative surfaces, only use fixtures made of static-safe materials. Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and Styrofoam. Handle electrostatic-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these items only at static-free workstations. Avoid contact with pins, leads, or circuitry. Turn off power and input signals before inserting or removing connectors or test equipment.
Maintenance and Service Guide
45
Removal and Replacement Preliminaries
4.7 Grounding Equipment and Methods
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors, connect a wrist strap with alligator clips. When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can be used at standing workstations and are compatible with most types of shoes or boots. On conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one-megohm resistance between the operator and ground. To be effective, the conductive strips must be worn in contact with the skin.
Other grounding equipment recommended for use in preventing electrostatic damage includes:
Antistatic tape Antistatic smocks, aprons, and sleeve protectors Conductive bins and other assembly or soldering aids Nonconductive foam Conductive tabletop workstations with ground cords of one-megohm resistance Static-dissipative tables or floor mats with hard ties to the ground Field service kits Static awareness labels Material-handling packages
46
Maintenance and Service Guide
Removal and Replacement Preliminaries
Nonconductive plastic bags, tubes, or boxes Metal tote boxes Electrostatic voltage levels and protective materials Table 4-1 shows how humidity affects the electrostatic voltage levels generated by different activities.
Table 4-1 Typical Electrostatic Voltage Levels
Relative Humidity Event Walking across carpet Walking across vinyl floor Motions of bench worker Removing DIPS from plastic tube Removing DIPS from vinyl tray Removing DIPS from Styrofoam Removing bubble pack from PCB Packing PCBs in foam-lined box 10% 35,000 V 12,000 V 6,000 V 2,000 V 11,500 V 14,500 V 26,500 V 21,000 V 40% 15,000 V 5,000 V 800 V 700 V 4,000 V 5,000 V 20,000 V 11,000 V 55% 7,500 V 3,000 V 400 V 400 V 2,000 V 3,500 V 7,000 V 5,000 V
A product can be degraded by as little as 700 volts.
Table 4-2 lists the shielding protection provided by antistatic bags and floor mats.
Table 4-2 Static-Shielding Materials
Material Antistatic plastic Carbon-loaded plastic Metallized laminate Use Bags Floor mats Floor mats Voltage Protection Level 1,500 V 7,500 V 5,000 V
Maintenance and Service Guide
47
5
Removal and Replacement Procedures
This chapter provides removal and replacement procedures. Torx T8 and Phillips P0 screws are removed during disassembly. There are 54 screws, in 8 different sizes, that must be removed, replaced, and loosened when servicing the notebook. Make special note of each screw size and location during removal and replacement. Refer to Appendix C, "Screw Listing," for detailed information on screw sizes, locations, and usage.
Maintenance and Service Guide
51
Removal and Replacement Procedures
5.1 Serial Number
Report the notebook serial number to Compaq when requesting information or ordering spare parts. The serial number is located on the bottom of the notebook (Figure 5-1).
Figure 5-1. Serial Number Location
5.2 Disassembly Sequence Chart
Use the chart below to determine the section number to be referenced when removing notebook components.
Table 5-1 Disassembly Sequence Chart
Section 5.3 Description Preparing the notebook for disassembly Battery pack 0 (2 for battery pack space saver) # of Screws Removed
52
Maintenance and Service Guide
Removal and Replacement Procedures
Table 5-1 Disassembly Sequence Chart (Continued)
Section 5.3 (Continued) Description Hard drive # of Screws Removed 4 to remove hard drive 4 to separate hard drive from hard drive bracket 0 2 loosened 1 2 1 5 loosened 3 0 4 17 1 2 6 0
5.4 5.5 5.6 5.7 5.8 5.9 5.10 5.11 5.12 5.13 5.14 5.15 5.16 5.17
Notebook feet Memory expansion board Optical drive LED switch cover Keyboard Heat sink Fan Processor Display assembly Top cover 1394 board Modem board System board RTC battery
Maintenance and Service Guide
53
Removal and Replacement Procedures
5.3 Preparing the Notebook for Disassembly
Perform the following steps before disassembling the notebook: 1. Turn off the notebook. 2. Disconnect the AC adapter and all external devices. 3. Remove the battery pack by following these steps:
Battery Pack Spare Part Number Information
Battery pack, 12 cell, Li ion 310642-001
a. Turn the notebook bottom side up with the rear panel facing you.
54
Maintenance and Service Guide
Removal and Replacement Procedures
b. Slide the battery pack lock latches 1 to the right (Figure 5-2). c. Slide and hold the battery pack release latch 2 to the right. d. Use the notch 3 in the battery pack to swing the front edge of the battery pack up and back 4. e. Remove the battery pack.
Figure 5-2. Removing the Battery Pack
Reverse the preceding procedure to install the battery pack. 4. Remove the battery bay space saver by following these steps:
Battery Bay Space Saver Spare Part Number Information
For use only with Compaq 800 models 313579-001
a. Turn the notebook bottom side up with the rear panel facing you.
Maintenance and Service Guide
55
Removal and Replacement Procedures
b. Remove the two TM2.5 × 7.0 screws 1 that secure the battery bay space saver to the notebook (Figure 5-3). c. Slide the battery pack lock latches 2 to the right. d. Slide and hold the battery pack release latch 3 to the right. e. Use the notch 4 in the battery bay space saver to swing the front edge of the space saver up and back 5. f. Remove the battery bay space saver.
Figure 5-3. Removing the Battery Bay Space Saver
Reverse the preceding procedure to install the battery bay space saver.
56
Maintenance and Service Guide
Removal and Replacement Procedures
5. Remove the hard drive by following these steps:
Hard Drives Spare Part Number Information
80 GB 60 GB 40 GB 30 GB 20 GB Hard drive carrier with connector 320038-001 316744-001 310645-001 310644-001 310643-001 310733-001
a. Turn the notebook bottom side up with the right side facing you. b. Remove the four TM2.5 × 7.0 screws 1 that secure the hard drive assembly to the notebook (Figure 5-4). c. Slide the hard drive assembly forward 2 and remove it from the hard drive bay.
Figure 5-4. Removing the Hard Drive Assembly
Reverse the preceding procedure to install the hard drive assembly.
Maintenance and Service Guide 57
Removal and Replacement Procedures
d. Remove the four PM3.0 × 4.0 screws 1 that secure the hard drive to the hard drive bracket (Figure 5-5). e. Remove the hard drive 2 from the hard drive carrier.
Figure 5-5. Removing the Hard Drive from the Hard Drive Carrier
Reverse the preceding procedure to install the hard drive into the hard drive carrier.
58
Maintenance and Service Guide
Removal and Replacement Procedures
5.4 Notebook Feet
The notebook feet are adhesive-backed