SERVICE MANUAL 6.5-INCH TOUCH PANEL WIDE LCD MONITOR
* The model is component system unit of MONITOR Unit and AV Interface Unit.
8/04-A TO ALPINE Home Page 68E37328S01
TME-M770 The following cautions will prevent accidents in the workplace and will ensure safe products. *The symbols indicate caution is needed to prevent injuries and damage to property. The symbols and their meanings follow.
If you ignore this symbol and handle the product incorrectly or unsafely, Warning serious injury or death may result.
If you ignore this symbol and handle the product incorrectly or unsafely, Caution injury or only material damage may result.
*The following symbols indicate two levels of cautions.
When you see this symbol, you have to be very careful.
When you see this symbol, you have to follow the instructions there.
Warning Do not look squarely into the laser light Fuse Caution coming from the pickup. Always use a designated fuse. You may loose you sight. Use of an incorrect fuse may result in a fire.
Caution Do not allow wiring to be caught in the Battery Caution screw/chassis. Use the designated battery. If wiring is caught in the screw/chassis, it may Confirm the correct polarity and seat of the cause a short circuit, resulting in a fire. battery. An incorrect battery or an improperly connected or seated battery may result in a fire.
High Temperature Caution Designated Parts Caution Touching the heat sink may cause severe burns. Look up the part list and ensure that only designated parts are used to prevent problems or accidents.
Reverse Power Supply Connections or Wiring Caution Misconnections Caution Ensure that the wiring is correct when rewiring to Reverse power supply connections or prevent problems with ignition/breakdown. misconnections may cause ignition problems and smoke may result.
Soldering Caution Wear Gloves Hot solder from solder splash may cause severe Wear gloves to prevent electrical shocks or injury burns. from the end face of the metal.
-2- TME-M770
Contents
Packing Assembly Parts List 4
Packing Method View 4
Specifications 5,6
System Diagram 7 to 14
Adjustment Procedures 15 to 18
Extension Cable 19
20 to 29
30 to 44
NOTE : Due to continuing product improvement, specifications and designs are subject to change without notice.
-3- TME-M770 Packing Assembly Parts List Symbol Part No. Description Symbol Part No. Description No. No. 101 01E37285S01 ASSY DIN CABLE #1 108 13E37289S01 PANEL,FACE #1 102 01E37286S01 ASSY CONNECTOR 10P #1 109 75E37290S01 SPONGE,CUSHION-CASE $1 102 01E37297S01 ASSY CONNECTOR #1 110 75E37291S01 SPONGE,CUSHION-B #1 103 68-00493Z15 OWNER'S MANUAL #1 111 75E37292S01 SPONGE,CUSHION-A $1 103 68-00493Z17 OWNER'S MANUAL #1 112 55E37293S01 CASE,LOCK
NOTE:#1:For North American Model Only, $1:For General Foreign Model Only, Others:Common.
Packing Method View
101 103 NOTE:#1:For North American Model Only, $1:For General Foreign Model Only, Others:Common. $1 #1 #1 115 #1 #1 106 114 X4 X4 $1 107 109 X2 X4 116
102
104 X4
105 X2 #1 108
AV Interface Unit 770 SUPPLY
E-M IN
POWER RGB
TM OR OUT PHONE
NIT OUT DISPLAY
MO E LCD WID EL PAN CH TOU AUX IN 1 AUX IN 2 AUX OUT
AUDIO VIDEO AUDIO
#1 R L VIDEO AUDIO
R L VIDEO
R L
110 to 113 #1 110 MONITOR Unit -M770 TME ITOR MON
X1 LCD L WIDE H PANE TOUC
#1 111 ER POW
X1 #1 112
#1 113 X1
X1
-4- TO CONTENTS TME-M770
Specifications
Screen Size ......................................................................................................................................... 6.5-Type Wide Display System ........................................................... Low Reflection Rear Projection Type TN Liquid Crystal Panel Drive System ........................................................................................... Active Matrix Drive, Nomally White Display Number of Picuture Elements ...................................................................... 280,000 pcs. (H : 1,200 X V : 234 Dots) Light Source ........................................................ Internal Optical System (U-Type Cold Cathode Fluorescent Tube)