Text preview for : Toshiba satellite pro 6000-Service manual.pdf part of Toshiba Satelite pro 6000-series Service manual
Back to : Toshiba satellite pro 600 | Home
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite Pro 6000 Series
TM
GENERAL INFORMATION
Tools Required for Proper Disassembly and Reassembly: 1. Phillips Screwdriver (Size 0&1) 2. Flat head Screwdriver 3. Security Torx (Size 7) 4. Case Separator 5. ESD Wrist Strap 6. ESD mats 7. Tweezers
Before attempting any of the following procedures, make sure that the main battery and AC adaptor is not connected to the unit and the environment in which you are working on is protected from Electro-Static Discharge(ESD).
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite Pro 6000 Series
TM
TABLE OF CONTENTS:
1. BATTERY PACK REMOVAL 2. OPTIONAL PC CARD REMOVAL 3. SELECT BAY REMOVAL 4. CD-R/W/DVD-ROM DRIVE DISASSEMBLY 5. MEMORY MODULE REMOVAL 6. BLUETOOTH CARD REMOVAL 7. MODEM BOARD REMOVAL 8. HDD REMOVAL 9. KEYBOARD REMOVAL 10 WIRELESS LAN CARD REMOVAL 11. TOP COVER REMOVAL 12. COOLING MODULE REMOVAL 13. CPU REMOVAL 14. RTC BATTERY REMOVAL 15. POWER SUPPLY BOARD REMOVAL 16. SD/SOUND BOARD REMOVAL 17. SYSTEM BOARD REMOVAL 18. MEMBRANE SWITCH REMOVAL 19. SPEAKERS REMOVAL 20. 14.1'' DISPLAY MASK REMOVAL 21. FL INVERTER AND 14.1'' LCD REMOVAL
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite Pro 6000 Series
BATTERY PACK REMOVAL
TM
OPTIONAL PC CARD REMOVAL
Battery lock
Release lever PC card Eject button 1. Press the eject button of the PCCard you want to remove. 2. Press the extended eject button to pop the PC card out. 3. Grasp the PC card and remove it. Note: Before removing any PC Card device, make sure it is "STOPPED" in the PC Card manager.
Battery Pack 1. Turn the computer upside down as shown. 2. Slide the battery lock to unlock position. 3. Slide battery release lever in the direction of the arrow. 3. Lift out the battery.
SELECT BAY REMOVAL
CD-R/W/DVD-ROM DRIVE DISASSEMBLY
CD-R/W/DVD-ROM drive Base cover
Connector Release lever Select bay device
M2x3 silver flat head screws
1. Turn the computer upside down. 2. Slide the release lever in the direction of the arrow. 3. Pull out the select bay device in the direction of the arrow.
M2x8 silver Connector cover screws 1. Remove five M2x3 silver flat head screws securing the base cover and lift out the cover. 2. Remove two M2x8 silver screws securing the connector cover. 3. Remove the connector cover and the connector from the CD-R/W/DVD-ROM drive.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite Pro 6000 Series
MEMORY MODULE REMOVAL
Memory slot cover
TM
M2.5x4 black screws
1. Turn the computer upside down. 2. Remove two M2.5x4 black screws securing the memory cover. 3. Lift out the memory slot cover.
Memory clips 4. Spread the memory clips outward and pull the memory module out of the connector on a 45 degree angle.
BLUETOOTH CARD REMOVAL
Bluetooth cover
M2x4 black security torx screw
Glass tape
Bluetooth card
Coaxial cable
1. Remove one M2x4 security torx screw securing the bluetooth cover. 2. Lift out the bluetooth cover.
3. Disconnect the coaxial cable from the bluetooth card. 4. Disconnect the bluetooth card from the system board.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite Pro 6000 Series
MODEM BOARD REMOVAL
M2x4 brass screws Modem harness Modem slot cover
TM
M2.5x4 black screw 1. Remove one M2.5x4 black screw securing the modem slot cover. 2. Insert your finger nail or the case separator into the notched side of the cover and lift up to release the two latches securing the left side of the modem slot cover.
Modem board 3. Disconnect the modem harness from the modem board. 4. Remove two M2x4 brass screws securing the modem board. 5. Lift up the modem board to disconnect it from the system board.
HDD REMOVAL
HDD cover
M2.5x6 black flat head screw
Plastic Tab
HDD pack
1. Turn the computer upside down. 2. Remove one M2.5x6 black flat head screw securing HDD cover. 3. Remove the HDD cover.
4. Unfold the plastic tab and pull to remove the HDD from the bay.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite Pro 6000 Series
HDD REMOVAL
HDD bracket Latch
TM
KEYBOARD REMOVAL
Keyboard
HDD
M3x4 brass flat head screws Keyboard holder 1. Turn the computer right side up and open the display panel. 2. Using the case separator, unlatch the keyboard holder at the top of the keyboard.
5. Remove two M3x4 brass flat head screws securing the HDD to the bracket and remove the HDDbracket.
KEYBOARD REMOVAL
Keyboard
Keyboard cable
PJ445
M2.5x2.6 black screws 3. Remove two M2.5x2.6 black screws securing the keyboard. 4. Lift out the keyboard and set it as shown above. 5. Disconnect the keyboard cable from PJ445 on the system board.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite Pro 6000 Series
WIRELESS LAN CARD REMOVAL
TM
Mini-PCI connector clips
Mini PCI cover
M2.5x4 security torx screw
Wireless LAN card
Black coax cable
White coax cable
1. Remove one M2x4 security torx screw securing the mini PCI cover and lift out the cover.
2. Disconnect the black and white coax from the wireless LAN card. 3. Spread the Mini-PCI connector clips and pull the Wireless LAN card out of the connector about 45 degree angle.
TOP COVER REMOVAL
M2.5x8 silver screws M2.5x4 black flat head screw
M2.5x4 black flat head screws M2.5x20 black screws 1. Turn the computer upside down and remove the following screws: -12 M2.5x8 black screws -1 M2.5x4 black flat head screw -2 M2.5x20 black screws
2. Turn the computer right side up with the rear facing you. 3. Remove two M2.5x4 black flat head screws securing the top cover.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite Pro 6000 Series
TOP COVER REMOVAL
Cooling module PJ34 LCD/FL harness PJ311 PJ310 PJ309 Left/Rigth speaker cable IPS membrane switch 3. Disconnect the left speaker cable from PJ310 and the right speaker cable from PJ311 on the top board. 4. Disconnect the LCD/FL harness from PJ34 and the IPS membrane switch from PJ311 on the system board. 5. Lift out the top cover assembly. Note: When installing the top cover, ensure that the bluetooth coaxial cable is properly routed to the Bluetooth slot. M2X4 brass screws PJ770 1. Disconnect the fan cable from PJ770 on the top board. 2. Remove two M2.5x6 black flat head screws and four M2x4 brass screws securing the cooling module. 3. Lift out the cooling module. Fan cable
TM
COOLING MODULE REMOVAL
M2.5x6 black flat head screws
CPU REMOVAL
CPU CPU
RTC BATTERY REMOVAL
Close CPU lock Open
Silicone grease 1. Insert a flat head screwdriver in the CPU lock and rotate it counter-clockwise to unlock the CPU. 2. Lift out the CPU. NOTE: When installing the CPU, make sure that a silicone grease is applied before attaching the heat sink. Please refer to FSB-200112 for the complete procedures on how to apply the silicone grease.
RTC Battery PJ5 RTC harness 1. Disconnect the RTC harness from PJ5 on the Battery/LED board. 2. Lift out the RTC battery.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite Pro 6000 Series
POWER SUPPLY BOARD REMOVAL
System board
TM
SD/SOUND BOARD REMOVAL
SD interface cable PJ150 Wireless LAN switch button Sound Interface cable PJ103
Power supply harness
M2.5x4 black flat head screws 1. Disconnect the power supply harness from PJ850 and PJ851 on the system board. 2. Remove two M2.5x4 black flat head screws securing the power supply board. 3. Disconnect the power supply board from the system board.
Power supply board
SYSTEM BOARD REMOVAL
M2.5x4 black flat head screw SD/Sound board 1. Disconnect the sound interface cable from PJ103 and the SD interface cable from PJ150 on the SD/Sound board. 2. Remove one M2.5x4 black flat head screw securing the SD/Sound board. 3. Remove the wireless LAN switch button. 4. Lift out the SD/Sound board. PJ803
HDD guide assy SD interface cable Sound interface cable M2.5x4 black flat head screws
M2.5x6 flat head black screw
M2.5x6 black flat head screws
Select bay cover
DC-IN jack harness
1. Remove one M2.5x6 black flat head screw securing the HDD guide assembly and lift out the HDD guide assembly. 2. Remove three M2.5x6 black flat head screws securing the select bay cover and lift out the select bay cover.
3. Disconnect following cables from the system board: -Sound interface cable from PJ103 -SD interface cable from PJ150 -DC-IN jack harness from PJ803 4. Remove four M2.5x4 black flat head screws securing the system board. 5. Lift out the system board.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite Pro 6000 Series
MEMBRANE SWITCH REMOVAL
Membrane switch assy Left and right speakers
TM
SPEAKERS REMOVAL
M2.5x4 black flat head screws 1. Remove three M2.5x4 black flat head screws securing the membrane switch. 2. Lift out the membrane switch assembly.
M2.5x4 black flat head screws 1. Remove two M2.5x4 black flat head screws securing the left and right speakers.
SPEAKERS REMOVAL
LCD panel
Left and Right speakers 2. Turn the display assembly right side up and open the LCD panel. 3. Lift out the left and right speakers.
Tough Enough for Today's World.
TOSHIBA
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite Pro 6000 Series
14.1" DISPLAY MASK REMOVAL
Latch M2x3 silver screws M2x5 silver screws M2x3 silver screws M2x5 silver screws
TM
FL INVERTER AND 14.1" LCD REMOVAL
LCD module assy
Display mask
LCD
Mask seals 1. Remove two mask seals at the bottom corners of the display assembly using a pair of fine-tipped tweezers. 2. Remove two M2.5x6 black flat head screws securing the display mask. 3. There are 23 latches securing the display mask. Carefully insert your fingers between the mask and the LCD panel and pry open the latches starting from the six top latches, to the five latches on each right and left sides, ending with the bottom seven latches.
LCD/ FL harness
FL inverter board
M2x4 silver screw
FL cable
1. Remove one M2x4 silver screw securing the FL inverter board. 2. Carefully lift up the FL inverter board and disconnect the LCD/FL cable from CN1 and the FL cable from CN2. 3. Remove four mask seals to expose four screws securing the LCD module assembly. 4. Remove four M2X5 silver screws securing the LCD module assembly. 5. Carefully rotate out the top of the LCD module enough to access the display cable 6. Peel off the tape securing the LCD/FL cable and disconnect the cable. 7. Remove four M2x3 silver screws securing the right and left LCD brackets.
Tough Enough for Today's World.
TOSHIBA