Beko 12[1].7.pdf part of BEKO Beko 12[1].7 Beko 12[1].7.pdf, BEKO TV 12.1 chassis Beko 12[1].7.pdf text manual preview

Text preview for : Beko 12[1].7.pdf part of BEKO Beko 12[1].7 BEKO TV 12.1 chassis Beko 12[1].7.pdf

Back to : Beko 12[1].7.pdf | Home

1. ELECTRICAL ADJUSTMENTS
BEKO Chassis 12.7
1.1 Supply Voltage Adjustment

Connect a digital voltmeter to the cathode of diode D607 at the AV mode of the TV and set the screen
voltage to the minimum with the screen potentiometer. Adjust the main supply voltage (B+) with P607
potentiometer to the following value (after supply adjustment, readjust Screen and focus voltage).
14" : 105 VDC (for A33EKC01X01)
20" : 118 VDC (for A48EJW011X21)
21" : 110 VDC (for A51EFS83X191)

2. SERVICE ADJUSTMENTS

To enter the Service Mode, `Service In/Out" button on the Service Remote Control or activate the
"Picture Menu" with the user remote control and press "9301" (Press "0" button to exit the Service
Mode).

"Red" , "Green", "Yellow" and "Blue" Teletext buttons are for Feature Setup, Geometry, White Balance
and IF menus respectively.

2.1 IF Adjustments

2.1.1 PAL SECAM BG/DK/I