Sharp_LC-32SD1E_LC-26SD1E_Software_Update_[SM].pdf part of Sharp Sharp LC-32SD1E LC-26SD1E Software Update [SM] Sharp_LC-32SD1E_LC-26SD1E_Software_Update_[SM].pdf, Sharp Monitor Sharp_LC-32SD1E_LC-26SD1E_Software_Update

Text preview for : Sharp_LC-32SD1E_LC-26SD1E_Software_Update_[SM].pdf part of Sharp Sharp LC-32SD1E LC-26SD1E Software Update [SM] Sharp Monitor Sharp_LC-32SD1E_LC-26SD1E_Software_Update_[SM].pdf

Back to : Sharp_LC-32SD1E_LC-26SD1E | Home

LC-26SD1E/RU, LC-32SD1E/RU
CHAPTER 5. ADJUSTMENT PROCEDURE
LC-26SD1E
Service Manual
The adjustment values are set to their optimum at the factory before shipping.
If by any chance a value should become improper or a readjustment is required due to part replacement, make an adjustment according to the fol-
lowing procedure.

[1] After replacement of any PWB and/or IC for repair, note the following.
When replacing the following units, be sure to prepare the new units loaded with updated software.

MAIN-UNIT : DUNTKD890FM14 (LC-26SD1E/RU)
DUNTKD890FM16 (LC-32SD1E/RU)