Text preview for : 27132-90007_27130B_8-Channel_Multiplexer_Technical_Reference_Mar85.pdf part of HP 27132-90007 27130B 8-Channel Multiplexer Technical Reference Mar85 HP 9000_cio 27132-90007_27130B_8-Channel_Multiplexer_Technical_Reference_Mar85.pdf
Back to : 27132-90007_27130B_8-Chan | Home
HP 271308
EIGHT -CHANNEL MUL TIPLEXER
(MUX)
Technical Reference Manual
Card Assembly: 5061-4929
Date Code: A-2318
Flin- HEWLETT
.:~ PACKARD
HEWLETT-PACKARD COMPANY Manual Part No.2 7132-90007
Roseville Networks Division E0385
8000 Foothills Boulevard Printed in U.S.A
Roseville, California 95678 March 1985
PRINTING HISTORY
The Printing History below identifies the Edition of this Manual and any Updates that are
included. Periodically, update packages are distributed which contain replacement pages to
be merged into the manual, including an updated copy of this Printing History page. Also,
the update may contain write-in instructions. -
Each reprinting of this manual will incorporate all past updates; however, no new informa-
tion will be added. Thus, the reprinted copy will be identical in content to prior printings
of the same edition with its user-inserted update information. New editions of this
manual will contain new information, as well as updates.
First Edition ................ March 1985
NOTICE
The information contained in this document is subject to change without notice.
HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO
THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Hewlett-Packard shall not be liable for errors contained herein or for incidental or con-
sequential damages in connection with the furnishing, performance, or use of this material.
This document contains proprietary information which is protected by copyright. All
rights are reserved. No part of this document may be photocopied or reproduced without
the prior written consent of Hewlett-Packard Company.
Copyright (c) 1985 by HEWLETT -PACKARD COMPANY
11
CONTENTS
-------
Section I
GENERAL INFORMATION
I nt roduct ion .............................................................. 1 -1
Physical Description 1-1
Functional Description .................................................... 1-1
Eguipment Supplied 1-3
Options Available .......................... '............................... 1-3
Product and Part Identification 1-3
The Product ............................................................. 1 -3
Printed Circuit Card 1-3
r1anuals ................................................................. 1-4
Specifications 1-4
SectionII
INSTALLATION
Determining Current Requirements .......................................... 2-1
Firmware (EPROM) Installation 2-1
Jumpers ................................................................... 2-3
Memory Configuration Jumper 2-3
Signature Analysis Jumper ............................................... 2-5
lID Channel Interface 2-5
Per ipheral Device Interface ................. 0. 0 .. 0 0.. 0 ... 00............... 2-5
Extension Cable Fabr icat ion ........... 0.0 .0 .. 00' ...
o