Text preview for : alpine_cda-105ri.pdf part of ALPINE alpine cda-105ri ALPINE Car Audio CDA-105RI alpine_cda-105ri.pdf



Back to : alpine_cda-105ri.pdf | Home


The following cautions will prevent accidents in the workplace and will ensure safe products.
*The symbols indicate caution is needed to prevent injuries and damage to property.
The symbols and their meanings follow.


If you ignore this symbol and handle the product incorrectly or unsafely,
Warning serious injury or death may result.


If you ignore this symbol and handle the product incorrectly or unsafely,
Caution injury or only material damage may result.



*The following symbols indicate two levels of cautions.

When you see this symbol, you have to be very careful.



When you see this symbol, you have to follow the instructions there.




Warning
Do not look squarely into the laser light Fuse Caution
coming from the pickup. Always use a designated fuse.
You may loose you sight. Use of an incorrect fuse may result in a fire.



Caution
Do not allow wiring to be caught in the Battery Caution
screw/chassis. Use the designated battery.
If wiring is caught in the screw/chassis, it may Confirm the correct polarity and seat of the
cause a short circuit, resulting in a fire. battery.
An incorrect battery or an improperly connected
or seated battery may result in a fire.

High Temperature Caution Designated Parts Caution
Touching the heat sink may cause severe burns. Look up the part list and ensure that only
designated parts are used to prevent problems or
accidents.

Reverse Power Supply Connections or Wiring Caution
Misconnections Caution Ensure that the wiring is correct when rewiring to
Reverse power supply connections or prevent problems with ignition/breakdown.
misconnections may cause ignition problems and
smoke may result.

Soldering Caution Wear Gloves
Hot solder from solder splash may cause severe Wear gloves to prevent electrical shocks or injury
burns. from the end face of the metal.
Extension Cable
*Always connect the Extension Cable when making checks of voltage and repair.


(1) 01V39192S01
(2) 01V35647S01
(3) 01E40946S01
(1)
FRONT- CB401
P.W.Board ESC-P.W.Board
CB6001
CB6002

(2)
(3)

CH501

CH1201
CB500
DP33U MAIN-P.W.Board
Specifications
< FM RADIO >
Intermediate Frequency 10.7