Text preview for : hfe_onkyo_integra_dv-sp1000_service_en.pdf part of ONKYO hfe onkyo integra dv-sp1000 service en ONKYO Audio DV-SP1000 hfe_onkyo_integra_dv-sp1000_service_en.pdf
Back to : hfe_onkyo_integra_dv-sp10 | Home
DV-SP1000
Ref. No. 3791
122004
SERVICE MANUAL
ON STANDBY
TV
I INPUT
DVD PLAYER 1
4
2
5
3
6
+
T V CH
-
MODEL DV-SP1000
7 8 9
T V VOL
+10 0 CLEAR
SEARCH MEMORY DIMMER AMP INPUT
S M D INPUT
AMP INPUT
DVD V1 V2 V3
MODE
DVD AMP VCR TV
PICTURE
ZOOM ON CONTROL
U MEN
AUDIO P M EN U
TO
SEL
+
CH
ZOOM ENTER VOL
L MODE
-
RE
TUR UP
N SET
DISPLAY MUTING
LAST MEMORY STEP/SLOW RANDOM
REC LM RD
AUDIO SUBTITLE ANGLE RESOLUTION
AUDIO SBTTL ANGLE RSLTN
REPEAT A-B ASPECT
REPEAT A-B ASPECT
VIDEO INPUT VIDEO OFF LEARNING
V IN V OFF L1 L2
OPEN/CLOSE
L3 L4
RC-563DV
RC-563DV
Black, Silver and Golden models
BUDC1N, SUDC1N 120V AC, 60Hz
BUPP2P, SUPP2P 230-240V AC, 50Hz
GUGK3P, GUGR6P 220-230V AC, 50/60Hz
GUWT3P 120/220-230V AC, 50/60Hz
SAFETY-RELATED COMPONENT
WARNING!!
COMPONENTS IDENTIFIED BY MARK ON THE
SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE
CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.
REPLACE THESE COMPONENTS WITH ONKYO
PARTS WHOSE PART NUMBERS APPEAR AS SHOWN
IN THIS MANUAL.
MAKE LEAKAGE-CURRENT OR RESISTANCE
MEASUREMENTS TO DETERMINE THAT EXPOSED
PARTS ARE ACCEPTABLY INSULATED FROM THE
SUPPLY CIRCUIT BEFORE RETURNING THE
APPLIANCE TO THE CUSTOMER.
DV-SP1000
SPECIFICATIONS
Signal North American models: NTSC
System Other models: PAL/NTSC
Composite Video Output/Impedance 1.0 V(p-p)/75 ohm negative sync, RCA/phono
Y: 1.0 V(p-p)/75 ohm negative sync, 4-pin mini DIN
S-Video Output/Impedance
C: 0.286 V(p-p)/75 ohm
Y: 1.0 V(p-p)/75 ohm
Component Video Output/Impedance
PB/PR: 0.7 V(p-p)/75 ohm, RCA/phono, BNC (except Canadian model)
AV Connector (European only) 1.0 V(p-p)/75 ohm, Scart
DVD Audio 4 Hz-88 kHz (192 kHz)
Frequency 4 Hz-44 kHz (96 kHz)
DVD Linear Sound
Response 4 Hz-22 kHz (48 kHz)
Audio CD 4 Hz-20 kHz (44.1 kHz)
S/N Ratio 112 dB
Audio Dynamic Range 106 dB
THD (Total Harmonic Distortion) 0.002 % (1 kHz)
Wow and Flutter Below threshold of measurability
Audio Output (Digital/Optical) -22.5 dBm
Audio Output/ Impedance (Digital/Coaxial) 0.5V p-p / 75 ohm
Audio Output/ Impedance (Analog) 2.0 V(rms) / 320 ohm
HDMI socket (HDMI OUT) 19-pin
i.LINK socket 4-pin (S400)
North American models: AC 120 V, 60 Hz
Power European models: AC 230-240 V, 50 Hz
Supply Korean models: AC 220-230 V, 50/60 Hz
Asian models: AC 120/220-230 V, 50/60 Hz
Power Consumption 48 W
Stand-by Power Consumption 7.1 W
435 W x 123 H x 374 D mm
Dimensions (W x H x D)
17. 1/8 W x 4. 13/16 H x 14. 3/4 D inches
12.1 kg
Weight
26.7 lbs
Operation Condition Temperature 5 C - 35 C (41 F - 95 F)
DVD-Video, DVD-Audio, SACD, DVD-R (Video Mode), DVD-RW
(Video Mode/VR mode), Music CD/CD-R/RW, Video CD, MP3, JPEG
Disc Compatibility
Disc that has not been property finalized may only be partially playable
or not playable at all.
Specifications and features subject to change without notice.
DV-SP1000
SERVICE PROCEDURES-1
This set employs a laser. Therefore, be sure to follow Laser Diode Properties
carefully the instructions below when servicing.
DVD
WARNING!!
Wavelength: 650 nm
SERVICE WARNING : DO NOT APPROACH THE Laser output: 0.43 mW
LASER EXIT WITH THE EYE TOO CLOSELY.
IN CASE IT IS NECESSARY TO CONFIRM LASER CD
BEAM EMISSION, BE SURE TO OBSERVE FROM Wavelength: 780 nm
A DISTANCE OF MORE THAN 30cm FROM THE Laser output: 0.14 mW
SURFACE OF THE OBJECTIVE LENS ON THE
OPTICAL PICKUP BLOCK.
WARNING
WARNING: WARNING AVIS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR DO NOT OPEN NE PAS OUVRIR
MOISTURE. The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
CAUTION: "dangerous voltage" within the product's enclosure that may be of
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT sufficient magnitude to constitute a risk of electric shock to persons.
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
The exclamation point within an equilateral triangle is intended to alert
PARTS INSIDE. REFER SERVICING TO QUALIFIED
the user to the presence of important operating and maintenance
SERVICE PERSONNEL.
(servicing) instructions in the literature accompanying the appliance.
LASER WARNING
This unit contains a semiconductor laser system and is classified
The label on the right
as a "CLASS 1 LASER PRODUCT". So, to use this model
is applied on the rear
properly, read this Instruction Manual carefully. In case of any
trouble, please contact the store where you purchased the unit.
panel except for USA "CLASS 1 LASER
and Canadian PRODUCT "
To prevent being exposed to the laser beam, do not try to open
models.
the enclosure.
CAUTION:
VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK
FAILED OR DEFEATED. DO NOT STARE INTO BEAM. 1. This unit is a CLASS 1 LASER PRODUCT and employs a
laser inside the cabinet.
CAUTION: 2. To prevent the laser from being exposed, do not remove
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
the cover. Refer servicing to qualified personnel.
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
LASER BEAM CAUTION LABEL
SERVICE PROCEDURE
1. Replacing the fuses
This symbol located near the fuse indicates that the
fuse used is show operating type, For continued protection against
fire hazard, replace with same type fuse , For fuse rating, refer to
the marking adjest to the symbol.
Ce symbole indique que le fusible utilise est e lent.
Pour une protection permanente, n'utiliser que des fusibles de meme
type. Ce demier est indique la qu le present symbol est apposre.
REF. NO. PART NO. DESCRIPTION
F001 or 252158 1.6A-UL/T-237 Only
252252 1.6A-T/UL-ST2 Only NOTE:
F001 or 252075 2.5A-SW-EAK Except : U.S.A., Canadian region
252275 2.5A-SE-TL250V Except
F9001 or 252160 2.5A-UL/T-237 Only
252254 2.5A-T/UL-ST2 Only
F9001 or 252075 2.5A-SE-EAK Except
252275 2.5A-SE-TL250V Except
DV-SP1000
SERVICE PROCEDURES-2
2. Safety-check out
(Only U.S.A. model)
After correcting the original service problem perform the
following safety check before releasing the set to the customer
Connect the insulating-resistance tester between the plug of
power supply cord and terminal GND on the back panel.
Specifications: More than 10M ohm at 500V
INITIALIZING
Factory-shipped condition
Push button "ON" (Mechanical SW) Except
Press the [STOP] and [STANDBY] same time.
(Wait until FL display "No Disc") .
Push button "STANDBY".
Others
SURR. MODE Switch -------- "1" position
Mechanical power switch ---- ON
Confirm version of Microprocessor
At power ON.
1. Press "DISPLAY" key and "VIDEO OFF" key at same time.
2. Press "DISPLAY" key.
a) System microprocessor g) FL display microprocessor
b) Release version of System microprocessor h) Video microprocessor
c) Loader microprocessor version i) Loader of video microprocessor
d) B/E version of microprocessor j) iLINK microprocessor
e) F/E version of microprocessor k) Model name
f) CPPM l) Destination
m) All segment of TL tube
Note: Regional cod is displayed on the TV monitor.
A B C D
EXPLODED VIEW-1 P4203 P4202
P4204 A05 A60
P4950 x2
OVERALL A05
A95 P4005
(Except ) x2 P4003 A05
P3002 A58
1 A09 L902-
A05 x2 L905
x 28 x4
A05 U18
A02 P1101A x3
A423 A621
x2 U04 Except P1001A A58
From Pickup
P6703
ct
sele
tage
Vol
U05 U01
only
A33 P1302
x2
A31
2 A10 A39 P2003
x4 A429 A29
x2 P1301
P2001
Cloth A24 A623 P2002
U09 tape P2004 Tray
Cloth x2
A10 U08 tape Z725
x2 A999 A53 Z701
A625 x 4
Z714
20
4B
x2 x2
P6B
00
5B P63
02
B
P4
A41 x4
P6
70
3A
1B
P6
3 03
E1001
x5
2B
P7
010
P5
B
40
P6
55
Z723
A12 A51
F001 P7010 A43 Z711 Z723
U21 A39 x2 P960
3 A05 A44
x2 A08
A10 P9602
x4 A10 A1
A13 x2
U13 A58 A14 A999
P9604 A45
L901
A04 x 2
A06 x 2
E1001 x 4
F9001 P9102
A57
x4
P9104 A35
4 A619 A425 x2
U12
A01
A45
A05 T901 x 2
A47 A73
A49
x2
A300
A75
x 11
5 A77
x4 A427
A79 A80
x4
A81
x4
DV-SP1000
E F G H
A63
x2
A65 A427 A93 A97
Cloth x7
tape
A71
x6 A95
x2
A67
x3 A50 i.L
ink
U06 Tape /R
S-2
32C Cloth tape
HD
P9103 MI
A95
P6302 P5
x2
402
A
P6551 P5
002
A
P5402 A89
U19/U20 A91
Tape P5
401
A
x4 x4
P6005 P5
001
A
A95
P2901 U15 x2
P4571
1
A05 U02
ay P4008 E1001 A87
A615
x2
x2
Z713 10A
Cloth tape A85
x2 P70
714 U03
2
A05
x5 Cloth tape
P7201
P2701
A421 A101 A55
A23 x8 A91 A83
9601 x 10 x2
U07 x4
A20
Included A11 A317
A16
A22 x 10
x2
A615 A201 A325 A323
A613 A217 x3
A203
x2 A221
x2
A227
A10 x2 A05
x3 A205 A301 x 3 A407
U10 A211
A213 A403
A617 A221
x 2 A207 A409
A215
x4
A21
A17 A18 A411
x2 A11
A95
Powe SW
A331 only
A405
A19
U14
A401
A05
x3
A37
A05
A15 x 11
A311
A07
DV-SP1000
A B C D E F G H
EXPLODED VIEW-1 P4203 P4202 A63
P4204 A05 x2
A60
P4950 x2 A93 A97
OVERALL A05 A65 A427
A95 P4005 Cloth x7
P4003 A05 tape
A71
(Except ) x2 A58 x6 A95
1 A09 P3002 L902- x2
A05 x2 L905
x 28 x4 A67
U18 x3 A50 i.L
A05 U06 Tape ink
/R
A02 P1101A x3
S-2
32C Cloth tape
A423 A621
x2 U04 Except P1001A A58 P9103
HD
MI
A95
From Pickup
P6703 P6302 x2
P5
ct
402
sele A
tage
Vol
U05 U01 P6551 P5
002
A
only P5402 A89
U19/U20 A91
A33 P1302 Tape P5
401
x4 x4
A
x2 P6005 P5
001 A95
A
A31 P2901 U15 x2
2 A10 A39 P2003
x4 A429 A29 P4571
x2 P1301
P2001
Cloth A24 A623 P2002 A05 U02
U09 tape P2004 Tray P4008 E1001 A87
Cloth x2 A615
x2
x2
A10 U08 tape Z725 Cloth tape
x2 A999 Z701 Z713
x2 P70
10A A85
A53 U03
A625 x 4
Z714
20
4B
x2 x2
P6B
00
5B P63
02
B
P4
A41 x4 A05
P6
70
3A
P6
30
3
E1001 x5
P5
0B
40
2B
P6
55
1B
x5 Z723 Cloth tape
01
P7
A12 A51 P7201
F001 P7010 P2701
A43 Z711 Z723 A421 A101 A55
x2 A23 x8 A91 A83
U21 A05 A39 A44 P9601 x 10 x2
3 x2 U07 x4
A10 A08 P9602 A20
x4 A10 Included A11 A317
A13 x2 A16
A22 x 10
U13 A58 A14 A999
P9604 A45 x2
L901
A04 x 2 A201 A325
A615 A217 A323
A06 x 2 A613 A203 x3
E1001 x 4 x2 A221
x2
F9001 P9102 A227
A57 A10 A05
x4 x2
x3 A205 A301 x 3 A407
P9104 A35 U10 A211
4 A619 A425 x2 A213 A403
U12 A617 A221