Text preview for : GA22-6974-9_360_370_IO_Interface_Channel_to_Control_Unit_OEM_Information_Feb88.pdf part of IBM GA22-6974-9 360 370 IO Interface Channel to Control Unit OEM Information Feb88 IBM 370 channel GA22-6974-9_360_370_IO_Interface_Channel_to_Control_Unit_OEM_Information_Feb88.pdf
Back to : GA22-6974-9_360_370_IO_In | Home
GA22-6974-09
File No. 5360/5370-19
IBM System/360 and
System/370 I/O Interface
Channel to Control Unit
Original Equipment
Systems Manufacturers' Information
--..- -
- --
- -- - -
- ---
--
-
- - - ----"
- - - --
,
---
Tenth Edition (I
This is a reprint of GA22-6974-08 incorporating changes released in Technical Newsletter:
GN22-0698-00 (dated 30 October 1987)
This manual is provided for use in conjunction with other relevant IBM publications, and IBM makes no
warranty, express or implied, relative to its completeness or accuracy. The information in this manual is
current as of its publication date but is subject to change without notice. Before using this publication,
consult the latest IBM System/360 Bibliography, GC20-0360, and the IBM System/370, 30xx, and 4300
Processors Bibliography, GC20-000 I, for editions that are applicable and current.
This manual is not intended to be a manufacturing or engineering specification; it is assumed that the reader
understands the interrelationships among any affected systems, machines, programs, and media. However,
this manual does provide information that may be of interest to designers and manufacturers of equipment
to be attached to the IBM System/360 or IBM Systeln/370. IBM's responsibilities resulting from such an
attachment arc defmed in the IBM lwultiple Supplier System Bulletin, G 120-6648. Any references to this
lllanual should include the revision level and the publication date. .
I13M tnay have patents or pending patent applications covering subject matter described herein, including
appearance patents or applications. Furnishing this manual does not constitute or imply a grant of any
license under any patents, patent applications, tradenlarks, copyrights, or other rights of IBM or of any third
party, or any right to refer to IBM in any advertising or other promotional or marketing activities. IBM
assumes no responsibility for any infringement of patents or other rights that may result from the usc of this
manual or from the manufacture, usc, lease, or sale of apparatus described herein.
Licenses under TnM'S utility patents are available on reasonable and nondiscriminatory terms and conditions;
IBM does not grant licenses under its appearance design patents. Inquiries relative to licensing should be
directed, in writing, to: Director of Contracts and Licensing, International Business Machines Corporation,
Armonk, New York 10504.
References in this publication to IBM products, programs, or services do not imply that IBM intends to make
these available in all countries in which IBM operates. Any reference to an IBM program product is not
intended to state or imply that only IBM'S program product may be used. Any functionally equivalent
program may be used instead.
Publications are not stocked at the address given below. Requests for JBM publications should be made to
your IBM representative or to the IBM branch office serving your locality.
1\ foon for reader's comments is provided at the back of this publication. If the form has been removed,
comments tnay be addressed to: TnM Corporation, Central Systems Architecture, Department E57, PO Box
950, Poughkeepsie, NY, USA 12602. IBM may use or distribute whatever information you supply in any way it
believes appropriate without incurring any obligation to you.