Text preview for : FA-3000AWE Service Manual.pdf part of LG FA-3000AWE Service Manual LG Audio FA-3000AWE FA-3000AWE Service Manual.pdf
Back to : FA-3000AWE Service Manual | Home
SERVICE MANUAL
MODEL: FA-3000AWE
DIGITAL HOME
CINEMA SYSTEM
SERVICE MANUAL
POWER
VOLUME INPUT SEL
ON/STANDBYY
MODEL: FA-3000AWE
CONTENTS
ESD PRECAUTIONS ........................................................................................................................................ 2
SPECIFICATIONS ............................................................................................................................................ 3
TROUBLESHOOTING ...................................................................................................................................... 4
IC VOLTAGE SHEET ....................................................................................................................................... 6
BLOCK DIAGRAM ...............................................................................................................................................9
SCHEMATIC DIAGRAMS ............................................................................................................................... 10
WIRING DIAGRAM .......................................................................................................................................... 14
PRINTED CIRCUIT DIAGRAMS ...................................................................................................................... 15
SPEAKER ......................................................................................................................................................... 20
REPLACEMENT PARTS LIST ......................................................................................................................... 21
-1-
ESD PRECAUTIONS
Electrostatically Sensitive Devices (ESD)
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components
commonly are called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated
circuits and some field-effect transistors and semiconductor chip components. The following techniques should
be used to help reduce the incidence of component damage caused by static electricity.
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off
any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a
commercially available discharging wrist strap device, which should be removed for potential shock reasons
prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ESD devices, place the assembly on a conductive
surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ESD devices.
4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static" can
generate electrical charges sufficient to damage ESD devices.
5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ESD
devices.
6. Do not remove a replacement ESD device from its protective package until immediately before you are ready
to install it. (Most replacement ESD devices are packaged with leads electrically shorted together by
conductive foam, aluminum foil or comparable conductive materials).
7. Immediately before removing the protective material from the leads of a replacement ESD device, touch the
protective material to the chassis or circuit assembly into which the device will by installed.
CAUTION : BE SURE NO POWER IS APPLIED TO THE CHASSIS OR CIRCUIT, AND OBSERVE ALL OTHER
SAFETY PRECAUTIONS.
8. Minimize bodily motions when handing unpackaged replacement ESD devices. (Otherwise harmless motion
such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can
generate static electricity sufficient to damage an ESD device).
CAUTION. GRAPHIC SYMBOLS
THE LIGHTNING FLASH WITH APROWHEAD SYMBOL. WITHIN AN EQUILATERAL
TRIANGLE, IS INTENDED TO ALERT THE SERVICE PERSONNEL TO THE PRESENCE
OF UNINSULATED "DANGEROUS VOLTAGE" THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT
THE SERVICE PERSONNEL TO THE PRESENCE OF IMPORTANT SAFETY INFORMATION
IN SERVICE LITERATURE.
-2-
SPECIFICATIONS
Power supply AC230V, 50/60Hz
Power consumption 150W
Mass 12.4kg
External dimensions (W X H X D) 23.5 X 430 X 483mm
Operating conditions Temperature : 5