Text preview for : Service Tip SBS Fan Motor 1-05.pdf part of Samsung Service Tip SBS Fan Motor 1-05 Samsung Refridgerators RS265TDRS Service Tip Service Tip SBS Fan Motor 1-05.pdf
Back to : Service Tip SBS Fan Motor | Home
SERVICE TIP
PRODUCT: SBS Refrig
TIP REVISION DATE: 1/05/2012
Models: RS265TD**/XAA,
ELECTRONICS
RS267TD**/XAA
SUBJECT: Intermittent No Cool Condition in Refrigerator Section, Error Code 22E
Background: Refrigerator Section Evaporator Fan Motor erratic operation.
The evaporator motor wiring could become pinched by the fan motor case or the wiring to the motor could be
loose, causing intermittent flow of current to the motor. (See pictures).
Loose Connection Correct Connection
Solution: Remove the screw and open the fan motor case. Make sure that the wiring is connected
properly. Using a knife, enlarge the opening in the motor case so that the plastic will not pinch the
wires. Make sure that the foam tape is still in place at the opening to prevent migration of air into the
casing.
Caution: Replacing the fan motor may result in the same condition. Always check for loose or
pinched wires before replacing the motor.
Note: Consult the Samsung Service Website at (http://.service.samsungportal.com) for the Service Manual and other information on
this product.
This information is published for informational purposes only and intended for use only by personnel qualified for the specific tasks depicted. Qualified personnel are
those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when handling or servicing a product. Only qualified
personnel should repair products powered by electricity. Any attempt to handle, service or repair the product or products by anyone other than qualified personnel
could result in serious injury or death. You agree that your use of and reliance on this information is at your sole risk. This information is subject to change or update
without notice. There are no warranties, either expressed or implied, regarding the accuracy or completeness of this information.".