Text preview for : hfe_onkyo_integra_dtr-50-6_basic_user_en.pdf part of ONKYO hfe onkyo integra dtr-50-6 basic user en ONKYO Audio Integra DTR-50 hfe_onkyo_integra_dtr-50-6_basic_user_en.pdf
Back to : hfe_onkyo_integra_dtr-50- | Home
DTR-50.6
Basic Manual
Advanced Manual found here
http://integraworldwide.com/manual/dtr506/adv/en.html
En
Before Start
About the Basic Manual Features Supplied Accessories
The Basic Manual leads you through the fundamental steps Equipped with 7 channel amplifier
to enjoy the AV Receiver from connections to TV, speaker THX Select2 Plus certified Indoor FM antenna --- (1)
system and playback components, to necessary functions Incorporates QdeoTM technology for HDMI video
for playback. As well as that, Basic Manual informs you with upscaling
the instructions on frequently used functions. Besides, there Equipped with 4K/60 Hz Passthrough-compatible HDMI AM loop antenna --- (1)
is another part of the manual called Advanced Manual to IN/OUT jacks (only IN1 to IN4 support 4K)
inform you with more detailed information, which we have Supports the HDMI Through function which allows
decided to publish on the web from the ecological point of transmission from playback devices to the TV in standby
view. state Color labels for speaker cable --- (1)
Speaker Cable
Supports HDCP2.2, a strict copy-protection for providing
1
2
3
high quality content (HDMI IN3/OUT MAIN only) Remote controller (RC-883M) --- (1)
Advanced Manual Supports ARC (Audio Return Channel) Batteries (AA/R6) --- (2)
Advanced Manual is always updated with the latest Supports USB storage playback
information and its user friendly interface, which does not Supports variety of network functions such as Internet
matter whether you access from PC or Smartphone, helps Radio, DLNA, etc. Power cord --- (1)
you to understand more deeply about the AV Receiver. Supports MHL-enabled mobile device
Advanced Manual is consisted of the following chapters. Bi-Amping capability
Details on AM/FM Playback Lip Sync function to correct deviation of audio and video Speaker setup microphone --- (1)
Playing Music Files on a USB Storage Device Multi-zone function which allows you to play a different
Listening to Internet Radio source in another room from the main room (Video can The number in parenthesis indicates the quantity. On packaging, the letter
Playing Music with DLNA also be played in Zone 2) at the end of the product name indicates the color.
Playing Music Files in a Shared Folder 32 bit DSP (Digital Signal Processor) with excellent
Operating Music Files with the Remote Controller calculation performance
Listening Mode Music OptimizerTM for Compressed Digital Music files How to use the remote controller
Advanced Settings Phase Matching Bass System
Operating Other Components with the Remote Controller Automatic speaker setup available using supplied
Advanced Speaker Connection calibrated microphone (AccuEQ Room Calibration)
Connecting and Operating Onkyo RI Components Supports playback of MP3, WMA, WMA Lossless, FLAC, Remote control sensor
Control Function between the Unit and External Component WAV, Ogg Vorbis, Apple Lossless, DSD, Dolby TrueHD AV Receiver
Firmware Update via network and USB storage device (the supported
Troubleshooting formats will differ depending on the use environment)
Reference Information ISF (Imaging Science Foundation) Video Calibration Batteries (AA/R6)
Approx.
16 ft. (5 m)
Advanced Manual found here If you do not use the remote controller for a long time, remove the
http://integraworldwide.com/manual/dtr506/adv/en.html batteries to prevent leakage.
Note that keeping consumed batteries inside may cause corrosion
resulting in damage of the remote controller.
2
Step 1: Connections
TV
Personal computer HDMI
IN
HDMI
OUT
To use the ARC function, connect to the
HDMI cable ARC compatible HDMI jack of the TV and
make an appropriate setting on the unit.
See "2nd Step : Source Connection" of
"Step 2: Setting Up".
HDMI
OUT
HDMI HDMI
HDMI OUT OUT
OUT Blu-ray Disc/
DVD player
Game console Set-top box/Digital Satellite/Cable
video recorder, etc. set-top box, etc.
1 Connecting the TV and players
For how to make settings, see the Advanced Manual (http://
integraworldwide.com/manual/dtr506/adv/en.html).
To connect the TV and the unit, connect the HDMI OUT
Connection with a TV not supporting ARC
Important: The power cord must be connected only after all MAIN jack of the unit and the HDMI IN jack of the TV using TV
AUDIO
other connections are completed. an HDMI cable. With this connection, it becomes possible to DIGITAL
OUT
OPTICAL
display the setting screen of the unit on the TV or transmit OUT
video/audio signals from the player to the TV. If your TV
HDMI Cable Connection supports ARC (Audio Return Channel), it is possible to
play the TV sound with the AV receiver's speakers with this
The unit has many HDMI jacks on its rear panel and each connection only. If your TV does not support ARC, you need,
of them corresponds to an input selector button of the same in addition to the HDMI OUT MAIN jack connection, a digital
optical cable connection between the digital audio out optical Select an appropriate
name on the front panel. For example, a Blu-ray Disc player connection for your TV.
will be connected to the IN 1 jack and the BD/DVD button jack of the TV and the DIGITAL IN OPTICAL jack of the unit
on the front panel will be used to listen to the playback or an analog audio (RCA) cable connection between the
Another TV can be connected to the HDMI OUT SUB jack.
sound (if the player is CEC compliant, input will be switched audio output jack of the TV and the TV/CD analog audio
In this case, press Monitor Out on the main unit several
automatically). If you add another Blu-ray Disc player, you input jack of the unit.
times to display "SUB" or "MAIN+SUB" and select the
can use any other jack than IN 1. It is possible to change output method. With the sub output, the operation screen
assignment of the input jacks and input selector buttons. for Internet function or USB playback can be displayed.
3
Step 1: Connections
It is also possible to use the multi-zone function with this 1 4 5
jack. For details, see the section 5 "Using the multi-zone Analog audio (RCA) cable
function" of "Step 3: Playing Back".
The unit supports the HDMI Through function that allows 3 Connection with turntable: If it uses an MM type
transmission from players to the TV even if the unit is in cartridge and does not have a built-in audio equalizer,
standby. You have to modify the settings to enable the input connect it to the 3 PHONO jack. If the connected
selection link with CEC compliant device, connection with turntable has a built-in audio equalizer, connect it to the
ARC compatible TV, and HDMI Through function. See "2nd 2 TV/CD jack.
Step : Source Connection" of "Step 2: Setting Up". If it uses an MC type cartridge, install an audio equalizer compatible
with MC type cartridge between the unit and the turntable by
To enjoy HDCP2.2 protected video, connect the player to connecting it to the 2 TV/CD jack. For details, refer to the turntable's
the IN3 jack and the TV to the HDMI OUT MAIN jack of instruction manual.
the unit. Your player and TV need to support HDCP2.2. If the turntable has a ground wire, connect it to the GND terminal of
To play 4K or 1080p video, use the high speed HDMI this unit. If connecting the ground wire increases noise, disconnect it.
cable.
It is possible to send video and audio of an MHL- Video signal connection
enabled mobile device by connecting the MHL-enabled The unit has a video upconversion function. For details, see
mobile device to the AUX Input HDMI/MHL jacks on the the section on the right.
front panel.
4 Use a component video cable to connect a TV
with component video input jacks and a player with
Connecting Components without HDMI component video output jacks.
3 2
If your AV component does not have HDMI jack, use an Component video cable
Its transmitted video has higher quality than
available jack of your component for cable connection with that of composite video cable. Video signals input to the composite video input
this unit. Just as the HDMI jacks, other jacks on this unit jack or the COMPONENT VIDEO input jacks will be
have a preassigned input selector button on the front panel. upconverted to HDMI signals and then output from
See the name of the input selector button shown with the 5 Use a composite video cable to connect a TV with the HDMI output jack.
jack when connecting the device. composite video input jack or a player with composite Note that it is not possible to convert digital audio
video output jack. input signals to analog or vice versa.
Audio signal connection Composite video cable
1 Digital connection: Use a digital optical cable
(OPTICAL) or digital coaxial cable (COAXIAL) for
connection with a player.
Digital optical cable (OPTICAL)
As the digital in optical jack of the unit has a
cover, push in the cable of the player against
the cover as it is turned inside.
Digital coaxial cable (COAXIAL)
2 Analog connection: Use an analog audio (RCA) cable
for connection with a player. AV Receiver
To enjoy multi-zone playback of audio of a CD player or When you upconvert video signals input to the
such other player without HDMI output jack, you need COMPONENT VIDEO jacks and output them from the
to use the RCA cable to connect the corresponding HDMI OUT jack, set the output resolution of the player
to 480i/576i. If the input has 480p/576p or higher
jacks of the player and this unit. For details on the multi- resolution, a message prompting you to change the
zone function, see the section 5 "Using the multi-zone resolution setting will appear. If your player does not
function" of "Step 3: Playing Back". support 480i/576i output, use the composite video jack.
If multiple video signal inputs are put into one input
system, the output will be made in the order of HDMI,
component video, and composite video.
4
Step 1: Connections
2 Connecting speakers
F
Height R
H
Wide R
2
Front R
1
Front L
9
Wide L
G
Height L
Important: The power cord must be connected only after all 3
Center
other connections are completed.
12 3 9F 6
GH
45
78
12 Front speakers
3 Center speaker
45 Surround speakers
6 Subwoofer
78 Surround back speakers
9F Height speakers
GH Wide speakers
5.1 ch: 1 2 3 4 5 6
If there is only one
7.1 ch: 1 2 3 4 5 6 + 7 8 or surround back
1 2 3 4 5 6 + 9 F or speaker, connect it to
123456+GH the BACK L terminal.
Up to two subwoofers can be connected.
To use the multi-zone function, see the section 5 "Using
the multi-zone function" of "Step 3: Playing Back". 6 6 5 8 7 4
Subwoofer with built- Subwoofer with built- Surround R Surround back R Surround back L Surround L
in power amplifier in power amplifier
Important: and press Enter to confirm your selection. To return to the
You have to modify the setting if any of the speakers have previous screen, press Return. Press Receiver and then
Home on the remote controller. Select "Setup" - "2.Speaker
viewing the guidance displayed on the TV screen. Select Setup" - "Speaker Settings" - "Speaker Impedance" and
the item with the cursor buttons of the remote controller change the default value from "6ohms" to "4ohms".
5
Step 1: Connections
1/2"-5/8"(12-15 mm)
When using commercially available banana plugs: Network Connection
tighten the speaker terminals to the end and then insert the
banana plugs. Do not insert the cable core directly into the You can enjoy Internet radio and DLNA by connecting the
hole for banana plug of speaker terminal. unit to LAN. Connect the Ethernet cable to the Ethernet
(North American model) port of the router.
Cut and remove the plastic coating from the end of the
speaker cable, twist the core and connect it to the terminal.
Make correct connection between the unit's jacks and
speaker's jacks (+ to + and - to -) for each channel. If Internet radio
connection is wrong, a bass sound may become poor
due to reverse phase. Attaching the supplied colored
speaker cable labels to the + side on the both ends of
each channel's cable will help correct connection. The
subwoofer jack supports connection of a subwoofer with
built-in power amplifier. Set the cut-off filter selection
3 Other connections
switch of the subwoofer to DIRECT. If the subwoofer does PC
not have a cut-off filter selection switch but has a cut-off Router
AM/FM Antenna Connections
frequency adjusting dial, turn it to the maximum frequency.
If your subwoofer does not have built-in power amplifier, Connect the antennas to listen to AM/FM broadcast. When
you can connect a power amplifier between the unit and the listening to the broadcast for the first time, adjust the
subwoofer. antenna position and orientation to get the best reception. NAS
The speaker setting is 7.1 ch at the time of purchase.
You can change it manually or by using automatic
speaker setting. AM loop antenna (supplied)
Short-circuiting the + cable and - cable or contacting the
Headphones Connection
cable core to the rear panel of the unit may cause failure.
Also do not connect two or more cables to one speaker
or