Text preview for : 20061023162847421_ks7c-p-troub-6.pdf part of Samsung 20061023162847421 ks7c-p-troub-6 Samsung TV CS29Z45 chassis KS7C CS29Z45MQTXXSE__KS7C 20061023162847421_ks7c-p-troub-6.pdf
Back to : 20061023162847421_ks7c-p- | Home
Troubleshooting
6. Troubleshooting
6-1 Checkpoints by Error Mode
Power LED: Check that the LED works when turning the Master Switch ON/OFF
LED Indicators: See table 6-3-1 Basic Troubleshooting: LED Diagnosis on the Front Panel.
In case of a power failure or abnormal screen, check the following items.
1) Check that the power cord is correctly connected to a 230V wall outlet.
2) Check that the Master Switch has been pressed.
3) Check that the transmitter is turned on.
4) Check that transmitter device selection is set to TV.
5) Check that the signal cable is properly connected.
6) Check that channel setting has been set.
Samsung Electronics 6-1
Troubleshooting
6-1-1 Flow Chart for Malfunction
ICV201
No Picture & No Sound
D801S
Check the AC
voltage impress FP801S
IC801S T444S
Check the master
switch on
D811 Q401
Check the
Check the Yes Check the Yes Yes
IC801S #1 Check the others part
FUSE "FP801S" "D801S" #1
W6750F
No No No
Change "IC801S"
Change "FP801S" Change "D801S"
Yes
Compleat
Repair No Power
No picture & no sound
(1st power OK)
Yes Check the others
Check the +125V line
B+ line
No
"D811"(D811A) open Yes T444 B+ Pin #3 Yes Check the +125V line
and check Open and check others part
No No
Change the "D811" Yes
Check the "Q401"
(D811A)
No
Change the "Q401"
Compleat
repair no power
6-2 Samsung Electronics
Troubleshooting
6-2 Trouble-shooting with New Features
6-2-1 Installation & Connection
Problem Solution
The power does not turn on. Check if the power cord is properly connected.
Air broadcasting does not work. Check if the antenna is properly installed.
Cable broadcasting does not
Subscribe to a local cable broadcasting firm and get support.
work.
Satellite broadcasting does not
Install a satellite antenna (Parabola) and connect it to the TV.
work.
6-2-2 Menu & Remote Control
Problem Solution
Press the Select Device button to select the TV or external device.
Replace the battery of the remote control with a new one.
Insert the battery making sure the polarity (+,-) is correct.
Check if the angle or the distance is sufficient, or if there is any interference between the
The remote control does not work. product and the remote control.
Make sure the user has pressed the correct button.
To avoid direct sunlight to the receiving panel of the TV, remove any indoor lighting or
change the location of the TV.
Check if the power switch at the back left of the TV is turned on.
Cannot change the channel with Press the Select Device button to select the TV.
the remote control. Change the channel using the remote control of the cable or satellite receiver.
Press the TV/AV button and check if the AV item is grayed out. When the AV item is grayed
Cannot select an A/V channel.
out, you cannot select an A/V channel. Check if the connector is properly connected.
Cannot select a menu. Check if the menu is grayed out. If a menu is grayed out, it cannot be selected.
Samsung Electronics 6-3
Troubleshooting
6-2-3 Screen
Problem Solution
Check if the power cord is properly connected.
The screen is black and there is
Turn on the power.
no sound.
Select an AV channel that corresponds to the external device.
Only the screen is blank/it is dark
Adjust the screen brightness.
or too bright.
The screen is blue/the external Check if the connector is properly installed.
channel is not displayed. Select an AV channel that corresponds to the external device.
The screen overlaps Check if the antenna is properly installed.
(double/triple). Adjust the position, angle or direction of the antenna.
The screen is snowy or unclear.
Check if the antenna has been bent or moved by the wind.
The picture quality gets worse
Check the antenna for its lifetime. (Normally 3 - 5 years, 1-2 years near the coast)
when it is windy
Dotted or semi-dotted lines are
Install the antenna as far away from the road as possible.
displayed on the screen.
Adjust the color density.
The screen is black and white.
Check if the connector is properly installed.
The colors of the screen are
Adjust the color tones.
odd/strange.
Unusual lines appear on the
Keep the antenna away from the power cord or connectors if possible.
screen.
Unusual lines appear on the
screen when watching or Keep the video player as far away from the TV as possible.
recording to video.
6-2-4 Sound
Problem Solution
Increase the volume.
There is no sound.
Press the Mute button.
Increase the volume.
The sound is very low.
Set the auto volume control to ON.
There is a lot of noise. Keep the antenna away from the power cord or connectors if possible.
The selected language does not
Press the Multiplex button to select the TV.
appear.
6-4 Samsung Electronics
Troubleshooting
6-2-5 Channel
Problem Solution
Check if the antenna is properly installed.
There are no channels available. Press the Auto Channel button to store channels.
Contact your local broadcasting service station.
Adjust the position, angle or direction of the antenna.
Activate the Reception Sensitivity Boost feature.
Some channels are not available.
Contact your local broadcasting service station.
Use the number keys to select a specific channel and press Store/Clear to memorize it.
Only the UHF (14-69) channels
Check if the antenna is able to receive UHF signals.
are not available.
6-2-6 Others
Problem Solution
This noise may occur when the plastic material inside the TV expands or contracts according
The TV makes a noise as if
to the seasonal temperature or humidity. This is like the noise from a furniture/cabinet/sink
something is dropping inside.
unit, and there is no need for concern.
Samsung Electronics 6-5
Troubleshooting
6-3 Troubleshooting Procedures by Error Modes
6-3-1 Basic Troubleshooting: Diagnosis of LED on the Front Panel
: Light is On
: Light is Blinking
: Light is Off
Power Description
This happens when the Master Switch is not pressed or the power cord is disconnected.
This happens when the power cord is connected and the power switch is pressed.
If you cannot set the power switch on by pressing it, check the power switch Ass'y.
If you press the power switch of the transmitter or the channel key on the remote control when in
St-BY status, the screen will be turned on.
If the LED blinks and the screen is not displayed, check the connection between the Control
Assy and the Main Board.
6-3-2 Troubleshooting by the Checksum
Diagnosis of trouble by the checksum is neither reliable nor convenient.
You can only use the checksume of the current direct-view TV to determine whether the software is corrupted or not.
The Checksum value is determined according to the version of the software loaded on the set.
Therefore, you can determine whether the software has been properly downloaded, if you know the correct checksum for that
version of the software.
You can check the checksum according in the following order.
Factory Mode Checksum Right Button Calculate Checksum Output Checksum (e.g. 3036)
Checksum Examples
T-TR2PEU-1000 : checksum = 8036
T-TR2PEU-1010 : checksum = B612
6-6 Samsung Electronics