Text preview for : tv_plasma_daewoo_dp_42sm_chassis_sp115.rar part of Daewoo tv plasma daewoo dp 42sm chassis sp115 Daewoo Plasma SP-115 chassis tv_plasma_daewoo_dp_42sm_chassis_sp115.rar
Back to : tv_plasma_daewoo_dp_42sm_ | Home
CONTENTS
1. COMMENTS
2. SAFETY PRECAUTION
3. PRODUCT SPECIFICATION
4. BLOCK DIAGRAM
5. AV BLOCK DESCRIPTION
6. LVDS SPECIFICATIONS
7. SERVICE MODE (VIDEO PCB INITIAL DATA)
8. SOFTWARE UPGRADE METHOD
9. POWER ADJUSTMENTS
10.ASSEMBLY LIST
11.PDP MODULE CHECK POINT
11-1. Flow Chart
11-2. Serial Number
11-3. Panel Crack
11-4. Flexible Cable
11-5. Connectors
11-6. Tester Checking
11-7. Strip Defect
11-8. Vertical Line
11-9. Horizontal Line
12. EXPLODED VIEW
1
1. COMMENTS
This paper is the additional service manual for the
DP-42SM/WM/GM using the NEC panel.
Other service contents with the exception of this
manual are same as the existing service manual
(DP-42SM/WM/GM). The existing service manual
was made for ORION panel.
2
2. Saf ety Precautions
(1) When moving or laying down a PDP Set, at least two people must be working.
Avoid any impact towards the PDP Set.
(2) Do not leave the broken PDP Set on for a long time. To prevent any further
damages, after check the broken Set's condition, make sure to turn the power
(AC) off.
(3) When opening the BACK COVER, turn off the power (AC) to prevent electric
shock. When a PDP is on, high voltage and high current exist inside the Set.
(4) When loosening screws, check the connecting position and type of the
screw. Sort out the screws and store them separately. Because screws holding
PCB are working as electric circuit GROUNDING, make sure to check if any
screw is missing when assembling.
(5) If you open the BACK COVER, you will see a Panel Gas Exhaust Tube.If this
part is damaged, entire PDP PANEL must be replaced. Therefore, when working,
be careful not to damage this part.
(6) A PDP Set contains different kind of connector cables. When connecting or
disconnecting connector cables, check the direction and position of the cable
beforehand.
(7) When disconnecting connectors, unplug the connectors slowly with care.
Especially when connecting/disconnecting FFC (film) cables or FPC cables, do
not unplug the connectors too much instantaneously or strongly, and always
handle the cables with care.
(8) Connectors are designed so that if the number of pins or the direction does
not match, connectors will not fit. When having problem in plugging the
connectors, make sure to check their kind, position, and direction.
3
3. Product Specification
ITEM SPECIFICATION REMARK
1. GENERAL
1-1. MODEL NO DSP-4280NVS
1-2. CHASSIS NO SP-115
1-3. SCREEN SIZE 42"(16:9)
1-4. COUNTRY WORLD WIDE
1-5. RESOLUTION 853(H) X 480(V)
1-6. REMOCON TYPE R-V28A (E)
1-7. SAFETY STANDARD UL, C-UL, CE, CB, FCC(CLASS B),
CE(CLASS B)
2. MECHANICAL
2-1. APPEARANCE
1) WITHOUT STAND WxHxD=1,039 x 628 x 80 mm
2) WITH STAND WxHxD=1,039 x 725 x 320 mm
3) CARTON BOX WxHxD=1,256 x 800 x 327 mm
2-2. WEIGHT
1) WITHOUT STAND 29.9 Kg
2) WITH STAND 36.8 Kg
3. ELECTRICAL
3-1. VIDEO INPUT COMPOSITE(NTSC, PAL, SECAM,
PAL-M/N, NTSC4.43) &
S-VHS(50/60Hz Y/C) 2SETS
3-2. DTV/DVD INPUT 1080 i, 720P, 480P , 480i
(Y, Pb/Cb, Pr/Cr COMPONENT
SIGNAL) 2SETS
3-3. PC INPUT VGA ~ UXGA (15 PIN D-SUB) 1SET
3-4. SOUND INPUT VIDEO 2SETS, DTV/DVD 2SETS,
PC 1SET
3-4. SPEAKER OUTPUT 8W(R) + 8W(L)
3-5. POWER REQUIREMENT AC 100V~240V, 50/60Hz
3-6. POWER CONSUMPTION 320W
3-8. RS-232 CONTROL RS-232(FOR SOFTWARE UPGRADE)
3-9. FUNCTION
1) SCALING PC: H/V SIZE & POSITION ADJUST
VIDEO/DTV/DVD:NOMAL,16:9,
PANORAMA,ENLARGE LB,ENLARGE
LBS
2) ZOOM 20 SCALE ZOOM & PANING
3) OSD SUPPORT 11 LANGUAGES
4) OTHERS STILL, SLEEP MODE,SOUND MODE
4
4. OPTICAL
ITEM SPECIFICATION REMARK
4-2. ASPECT RATIO 16:9
4-3. NUMBER OF PIXELS 853(H)X480(V)
4-4. DISPLAY COLOR 16.77 MILLION COLOR (8BIT RGB)
4-5. PIXEL PITCH 1.08(H)X1.08(V)
4-6. PEAK LUMINANCE 300cd/m