Text preview for : philips_bdl6551v.pdf part of Philips philips bdl6551v Philips Monitor BDL6551V00 philips_bdl6551v.pdf



Back to : philips_bdl6551v.pdf | Home

65 inch FHD LCD PUBLIC DISPLAY

BDL6551V/00




Horizontal frequencies
31 - 8 3 kHz

TABLE OF CONTENTS
Description Page Description Page
Important Safety Notice--------------------------------------2 Failure Mode Of Panel - ------------------------------------40
Technical Data--------------------------------------------------3 Wiring Diagram-----------------------------------------41~42
Installation----------------------------------------------------4~7 Block Diagram-------------------------------------------43~44
Troubleshooting------------------------------------------------8 Scaler Diagram & C.B.A. -----------------------------45~53
On Screen Display----------------------------------------9~14 Power Diagram & C.B.A. ----------------------------54~56
Philips Pixel Defect Policy ---------------------------------15 Control Diagram & C.B.A. ----------------------------57~58
Mechanical Instructions ------------------------------16~19 General product specification---------------------59~118
Color adjustment ---------------------------------------20~21 Exploded V iew ---------------------------------------119~120
Electrical instruction ----------------------------------22~24 Spare/ Recommended P arts List-----------------------121
Service Tool-----------------------------------------------25~26 PCBA photos-------------------------------------------------122
DDC Instructions & Serial Number -----------------27~34 Repair tips---------------------------------------------123~124
DDC DATA ----------------------------------------------------35 Repair Flow chart------------------------------------125~130
Firmware Upgrade for CPU-- -------------------------36~39 Safety Test Requirments---------------------------------131




SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC
EQUIPMENT CONTAINING HIGH VOL TAGES.



CAUTION: USE A SEPARATE ISOLATION TRANSFORMER FOR THIS UNIT WHEN SERVICING.



REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES



Published by Philips Consumer Lifestyle Copyright reserved Subject to modification Aug 21 2009 GB
2 BDL6551V LCD

Important Safety Notice

Proper s ervic e and repair is important to the safe, reliable
FOR PRODUCTS CONTAINING LASER :
operation of all Philips Consumer Electronics Company
equipment. The service procedures recommended by Philips and DANGER - Invisible laser radiation when open.
described in this service manual a re eff ective methods of AVOID DIRECT EXPOSURE TO BEAM.
performing service operations . Some of these service CAUTION - Use of controls or adjustments or
operations require the us e of tools speciall y desi gned for the
performance of procedures other than
purpose. The special tools should be used when and as
those specified herein may result in
recomm ended.
hazardous radiation exposure.
It is im portant to note that this m anual c ontains various
CAUTI ONS and NOTICES which should becarefully read in CAUTION - The use of optical instruments with this

order to m inimize the risk of personal injury to service product will increase eye hazard.
personnel . The possibility exists that improper service
methods may damage the equipment. It is also important to
underst and that these CAUTIONS and NOTICES ARE NOT
EXHAU STIVE. Philips could not possibly know, evaluate and
TO ENSURE THE CONTINUED RELIABILITY OF THIS
advise the servic etrade of all conceivable ways i n which
service might be done or of the possible hazardous PRODUCT , USE ONLY ORIGINAL MANUFACTURER'S

consequences of each way. Consequently, Philips has not REPLACEMENT PAR TS, WHICH ARE LISTED WITH THEIR PART
undertaken any such broad evaluation. Accordingly, NUMBERS IN THE PARTS LIST SECTION OF THIS
who uses a servi ce procedure or tool which is not SERVICE MANUAL.
recommended by Philips must first satisfy himself thoroughly that
neither his safety nor the safe operation of the equipment will
be jeopardized by the service method selected.
* * Hereafter throughout this manual, Philips Consumer
Electronics Company will be referred to as Philips . * *


Take care during handling the LCD module with backlight
unit
- Must mount the module using mounting holes arranged in four
WARNING
corners.
- Do not press on the panel, edge of the frame strongly or electric
Critical components having special safety characteristics are shock as this will result in damage to the screen.
identified with a by the Ref. No. in the parts list and
- Do not scratch or press on the panel with any sharp objects, such
enclosed within a broken line
as pencil or pen as this may result in damage to the panel.
(where several critical components are grouped in one area)
- Protect the module from the ESD as it may damage the electronic
along with the safety symbol on the schematics or
circuit (C -MOS).
exploded views.
Use of substitute replacement parts which do not have the - Make certain that treatment body are grounded through

same speci fied safety characteristic s may create shock, fire, wrist band.
or other hazards . - Do not leave the module in high temperature and in areas of high
Under no circumstances should the original design be humidity for a long time.
modified or altered without written permission from Philips.
- Avoid contact with water as it may as hort circuit within the module.
Philips assumes no liability, express or implied, arising out of
- If the surface of panel become dirty, please wipe it off with a soft
any unauthorized modification of design.
material. (Cleaning with a dirty or rough cloth may damage the
Servicer assumes all liability.
panel.)
BDL6551V LCD 3
Technical Data
AUO Panel-1
LCD Panel AUO P645HW01 V0 Off mode < TBD W
LCD size 65" inch DPMS Support
Display Resolution 1920(H) x 1080(V) Power Saving Mode <1 W
Display Area 1428.48(H) x 803.52 (V) mm Power Control On/off control via IR/RS232/Push button
Pixel Pitch 0.744 mm
178 degree (Horizontal)/ 178 Interface Requirement
Viewing Angle degree (Vertical) with MVA
technology
Display Response Time (Tr+Tf) 8 msec (Typ.)
Display Color 1073.7M (10bits) Configuration
External Connector
Contrast Ratio 2500:1(Typ) Input Output
Luminance 700 cd/m2 (Typ.) 1 1
Lamp Life Time 50,000hrs (Min.) Power (AC)

AUO Panel-2 1
LCD Panel AUO P645HW03 V0
Power hard switch 0
LCD size 65" inch
Display Resolution 1920(H) x 1080(V)
Display Area 1428.48(H) x 803.52 (V) mm 1 1
Pixel Pitch 0.744 mm VGA (D-sub)
178 degree (Horizontal)/ 178
Viewing Angle degree (Vertical) with MVA 1 0
technology DVI
Display Response Time (Tr+Tf) 6.5 msec (Typ.)
Display Color 1073.4M (10bits)
1
Contrast Ratio 4000:1(Typ) Audio (PC) 0
Luminance 700 cd/m2 (Typ.)
Lamp Life Time 50,000hrs (Min.) 1 0
HDMI
Features
Max & Native Panel Resolution 1920 x 1080 @ 60 Hz
1 1
8-bit 162MHz ADC Yes
Component (YPbPr)
Picture in Picture(PIP), Picture on
Yes
Picture(POP) 2
3D comb-filter, 3D De-interlace Yes
2
Fully Programmable White Balance Audio (RCA/YPbPr) x1
Yes
functions
Enhanced H & V Sharpness Yes x1
PC Auto Phase adjustment and Auto 1 1
Yes
Mode Detect
RS232
Advanced video enhance. noise
Yes
reduction
1 1
RS232 control in and out Yes AV (VIDEO)
Screen saver with image sticking BNC/CBVS
Yes
protection (Image Retention)
VGA input and output Yes 1 0
TV wall support up to 5x5 Yes S-Video
Remote control lock in OSD Yes
Front panel keypad lock Yes
Scheduling Yes Environment Requirement
IR Pass Yes Operating Condition
HDMI Overscan Yes Operating
Temperature 0 to 40 degrees
Auto Adjustment Yes Temperature
Relative Humidity: 85%@50
Power Requirement Humidity
(non-condensing)
Built-in AC power board Altitude 0 meter to +3000 meters above sea level
Power Supply
By pass AC plug-in for external BOX PC Storage Condition
Power Cable Detachable AC power cord Temperature-20 to 60 degree
Temperature
AC power adaptor: 90~264V AC
Power Supply Voltage Relative Humidity: 10~85%@50
50/60Hz Humidity
(non-condensing)
Power ON mode: < 1 W
Power Consumption Altitude 0 meter to 12,000 meters above sea level
Standby mode: < 1 W
4 BDL6551V LCD

Installation
Front View Product Description - lights up red when the monitor is turned off
- blinks red when the monitor enters DPMS mode
7. Cable retainer installation holes
Install the cable retainer using these holes.
8. Carrying handle
Use these handles when carrying the monitor by hand. 1 2 3 4 5 8 8 6
77
Input/ Output Terminals




1. Remote control sensor, ambient light sensor and power indicator