Text preview for : HB581_SM_4567195722.pdf part of Philips HB581 SM 4567195722 Philips Household HB581 HB581_SM_4567195722.pdf
Back to : HB581_SM_4567195722.pdf | Home
Solarium
HB 581/A
Service
Service SUNSTUDIO
Service COMBI
! Service
Information ! Service
Information
Domestic Appliances and Personal Care
SAP coding HB 581
GENERAL TECHNICAL DATA
The full-body solarium HB 581/A is equipped with a Operating voltage : 3 x 230V, 50Hz
30 minute timer. Power consumption : approx. 4250W
After the pre-set tanning time, the appliance Ballast canopy : 3 x 100W
automatically switches off. : 6 x 80W
The facial tanner (HP 400 lamps) can be switched on Ballast couch : 14 x 100W
in two steps (180/260W) by means of switch Ballast power unit : 16 x 80W
SK 1/SK 2. Starter canopy : 16 x S12
After the facial tanner has been switched off, it : 3 x MagneTek ZG 4,5D
can only be switched on again after the lamp has Starter couch : 14 x S12
cooled down for 3 minutes! Lamp canopy : 16 x Cleo Performance 80W
It has eleven fans - six in the canopy and four in the : 3 x HP 400
couch and one in the control unit - for adequate cooling Lamp couch : 14 x Cleo Performance 100W
of the equipment during operation and two fans for body Timer : 30 min.
cooling. Safety class : double insulation
If malfunctions occur, thermal switch (SK7/SK9/SK11) Test mark : CE
will prevent the temperature from rising to an Length of mains cord : approx. 3m
unacceptable level. Irradiation field : approx. 185 x 80 cm
The power supply will only be switched on via the Dimensions : approx. 208 x 101 x 91 cm
relays (Re1/Re2) after the timer has been set. (L x W x H)
When choosing a place for the appliance, make sure
there is enough free space around the appliance to
guarantee proper cooling.
This solarium has to be connected to 3-phase mains.