Make | Model | Problem | Solution | Date |
| | | |
Found: 6
|
Beko | NR28416ND | Bright white raster | No 200v to TDA6108JF vid amp - crack in print by LOPTx ( under plastic cradle) | 14-09-04 |
Beko | NR28416NDS | Dead aft thunderstorm | IC601 (MC44608P40), T601 (2SK2545) R606/607 (0.47R, 1/2W) in psu replaced | 14-09-04 |
Beko | NR28416NDS | Dead with LOPTx insulation breakdown | LOPTx Pt no 058834-TR2 | 14-09-04 |
Hitachi | C2416TN | Sound missing | Memory IC002 | 14-09-04 |
Nikkai | NT1416 | Dead with whining from psu | C444 370pF 2kv in lop stage s/c | 14-09-04 |
Philips | 29PT9416 MG7.1 | Service Mode entering | Use the standard remote control and key in a special sequence '0,6,2,5,9,6' followed by pressing the 'MENU' button. If the main menu also appears with the service menu just press 'MENU' again to clear it.. The other way is to short the two service pins on the signal panel (pins 2 and 3 of connector 0356). The advantage of this last method is that all the software protections are turned off. | 14-09-04 |