| Make | Model | Problem | Solution | Date |
| | | |
| Found: 5
|
| Grundig | CUC 6360 / CUC 6361/ CUC 6365 | Intermittent no picture, it would fade out with the width getting smaller.
HT 150volts was down to 100volts. | C672 100 MFD @ 250VW | 14-09-04 |
| Grundig | CUC 6360 / CUC 6361/ CUC 6365 | No picture, but HT / EHT all ok, picture was blanked out. | CT5066 BC858. This is a s.m. device on the video processing pcb. It is on p22 of ic 5040. | 14-09-04 |
| Grundig | CUC6360 | E/W dist & lack of width | R508 5R6 fusible middle rear of main pcb | 14-09-04 |
| Grundig | CUC6360 | No sound | MSP3410 chip | 14-09-04 |
| grundig | CUC6360 | No Sound | Try to unplug the green connector going to the main swich (startup sliding switch),if sound comes on change main switch and clean the switch board from dust. | 08-12-06 |