Make | Model | Problem | Solution | Date |
| | | |
Found: 9
|
Goodmans | C210 | Dead with chopper tr s/c | Replace QS01, 2SD2498 (used BU2520AF); QS04 2SC945(used BC546); QP05, 2SA1012Y; RS03 2.2ohm 1 watt fusible; DS08 8.2 volt zener. ICV01, TDA3653B. Also replaced various caps, especially the 100uF 50 volt in the field supply after it blew up.Replaced chopper Tr & 2R2; QS04 o/c DS08 s/c & FOP chip | 14-09-04 |
Goodmans | C210 | Field collapse & sounds like line freq off | 470µ cap connected to DP18 F08AGO | 14-09-04 |
Goodmans | C210 | St/by only | RP07 330R sm - also check/replace RP10 | 14-09-04 |
JVC | C210EK | No sound | Crack in print by audio/IF sub panel | 14-09-04 |
JVC | C210EKY | Dead | STR54041 chopper chip or C913/917 | 14-09-04 |
JVC | C210EKY | Int luminance | Hairline crack in print pin 18 IC201 col decoder chip | 14-09-04 |
JVC | C210EKY | Poor Focus | LOPTx replaced | 14-09-04 |
JVC | C210EKY C210EKY | Focus - out of focus | If focus control adj A1's LOPTX faulty. | 14-09-04 |
JVC | C210KM | INT. SWITCHES TO STANDBY | D507 , D508 , Q508 , Q509 | 14-09-04 |