onkyo DPS.5.3 free download

File name onkyo DPS.5.3.pdf

DPS-5.3 Ref. No. 3726 SERVICE MANUAL Aug, 2002 DVD PLAYER MODEL DPS-5.3 ON TV ON / STANDBY OPEN /CLOSE STANDBY ANGLE AUDIO SUBTITLE LAST M COND. M DIMMER DISPLAY TOP MENU MENU CH - VOL + CH + ENTER VOL - RETURN TV/ VCR SETUP PAUSE STOP PLAY FR FF DOWN UP STEP/ SLOW 1 4 7 +10 2 5 8 0 3 6 9 SEARCH + FUNCTION M CLEAR RANDOM REPEAT A-B PROGRAM REMOTE CONTROLLER RC-451DV DVD TV Black model BMDD 120V AC, 60Hz RC-451DV SAFETY-RELATED COMPONENT WARNING!! THE MARK FOUND ON SOME COMPONENT PARTS INDICATES THE CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK. WHEN REPLACING, BE SURE TO USE PARTS OF IDENTICAL DESIGNATION. MAKE LEAKAGE-CURRENT OR RESISTANCE MEASUREMENTS TO DETERMINE THAT EXPOSED PARTS ARE ACCEPTABLY INSULATED FROM THE SUPPLY CIRCUIT BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. www.denom.com DPS-5.3 SPECIFICATIONS DVD Player Power supply Power consumption Power consumption (standby mode) Weight External dimensions Signal system Regional restriction code Laser Frequency range (digital audio) AC 120 V, 60 Hz 14 W 1.4 W 3.4 kg, 7.5 lbs. 435 x 91 x 312 mm (W/H/D), 17-1/8" x 3-9/16" x 12-5/16" Standard NTSC 1 Semiconductor laser, wavelength 650 nm DVD linear sound: Audio CD: Signal-to-noise ratio (digital audio) Audio dynamic range (digital audio) Harmonic distortion (digital audio) Wow and flutter Operating conditions More than 100 dB More than 96 dB Less than 0.015 % Below measurable level (less than ±0.001 % (W.PEAK)) Temperature: 5 C to 35 C (41 F to 95 F), Operation status: Horizontal 48 kHz sampling 4 Hz to 22 kHz 96 kHz sampling 4 Hz to 44 kHz 4 Hz to 20 kHz Outputs Video output S-video output Component video output Audio output (digital output Optical) Audio output (digital output Coaxial) Audio output (analog audio) Audio output (Mono) 1.0 V (p-p), 75 ohm , negative sync., pin jack x 1 (Y) 1.0 V (p-p), 75 ohm , negative sync., Mini DIN 4-pin x 1 (C) 0.286 V (p-p), 75 ohm (Y) 1.0 V (p-p), 75 ohm , negative sync., pin jack x 1 (PB)/(PR) 0.7 V (p-p), 75 ohm -22.5 dBm x 1 0.5 V (p-p), 75 ohm , pin jack x 1 2.0 V (rms), 470 ohm , pin jack (L, R) x 2 2.0 V (rms), 470 ohm , pin jack x 1 www.denom.com DPS-5.3 SERVICE PROCEDURE-1 REPLACING THE FUSES This symbol located near the fuse indicates that the fuse used is show operating type, For continued protection against fire hazard, replace with same type fuse , For fuse rating, refer to the marking adjust to the symbol. Ce symbole indique que le fusible utilise est e lent. Pour une protection permanente, n'utiliser que des fusibles de meme type. Ce demier est indique la qu le present symbol est apposre. REF.NO. F1 PART NO. 252252 or 252147 DESCRIPTION 1.6A-T/UL-ST2 or 1.6A-TSC Fuse SAFETY CHECK (Only U.S.A. model) After correcting the original service problem perform the following safety check before releasing the set to the customer Connect the insulating-resistance tester between the plug of power supply cord and terminal GND on the back panel. Specif