File name SONY SDM-N50PS.pdfSDM-N50PS
SERVICE MANUAL
US Model Canadian Model AEP Model
Chassis No. SCC-L32B-A
ST5 CHASSIS
SPECIFICATIONS
Panel type: a-Si TFT Active Matrix Picture size: 15 inch (38 cm) Input signal format RGB operating frequency* Horizontal: 30 61 kHz Vertical: 48 85 Hz (only XGA mode at 75 Hz) Resolution Horizontal: Max.1024 dots Vertical: Max.768 lines Input signal levels RGB video signal 0.700 Vp-p, 75 , positive SYNC signal TTL level, 2 k, positive or negative (Separate horizontal and vertical, or composite sync) 0.3 Vp-p, 75, negative (Sync on green) Headphones jack Stereo minijack Accepts impedance of more than 16 AUDIO IN jack Stereo minijack Accepts impedance of 47 k Accepts level 0.5 Vrms Power requirements 100 240 V, 50 60 Hz, 0.45 0.25 A Power consumption Max. 28 W Operating temperature 5 35 °C Dimensions (width/height/depth) Display (without stand): Approx. 356 × 280 × 26 mm (14 1/16 × 11 1/6 × 1 1/16 inches) Display (with stand, at maximum angle: 40 °): Approx. 356 × 225 × 203 mm (14 1/16 × 8 7/8 × 8 inches) Media engine (without stand): Approx. 45 × 180 × 180 mm (1 3/4 × 7 1/8 × 7 1/8 inches) Media engine (with stand): Approx. 94 × 185 × 180 mm (3 11/16 × 7 1/4 × 7 1/8 inches) LCD panel
Mass Display (with stand): Approx. 1.75 kg (3 lb 140 oz) Media engine (with stand): Approx. 0.85 kg (1 lb 14 oz) y Plug & Play DDC1/DDC2B/DDC2Bi · LCD display Accessories See page 8. · Media engine · Display stand · Media engine stand · Power cord · System connecting cable (2 m) (applicable cable type: DP-2) · HD15 (RGB) video signal cable · Audio cord (stereo miniplug) · Macintosh adapter · Windows Monitor Information Disk/Utility Disk · Macintosh Utility Disk · Software for use when installing the display vertically (WinPortrait/MacPortrait) · Warranty card · Notespfor Macintosh users g · This instruction manual * Recommended horizontal and vertical timing condition · Horizontal sync width duty should be more than 4.8% of total horizontal time or 0.8 µs, whichever is larger. · Horizontal blanking width should be more than 2.5 µsec. · Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
TFT LCD COLOR COMPUTER DISPLAY
MICROFILM
SDM-N50PS
DIAGNOSIS
Factorical preservation register Display part trouble Backlight trouble Body temperature trouble 5V voltage anomalous 3.3V voltage anomalous SHUTDOWN_LOG1 bit4 (16) SHUTDOWN_LOG1 bit2 (4) SHUTDOWN_LOG1 bit3 (8) SHUTDOWN_LOG1 bit5 (32) SHUTDOWN_LOG1 bit6 (64) LED Part of the body only Parts of the body and the display Parts of the body and the display Parts of the body and the display Parts of the body and the display LED indicates Red (0.5 sec) and Off (0.5 sec) Amber (0.5 sec) and Off (1.5 sec) Amber (1.0 sec) and Off (1.0 sec) Amber (1.5 sec) and Off (0.5 sec) Amber (1.5 sec) and Off (0.5 sec)
*Aging mode ... No input signal and press CONT key for longer than 2 second.
Power saving function
Thi |