File name TH-32LHD7.pdfOrder No. ITD0502001CE D10
LCD Display
TH-32LHD7UY TH-32LHD7UXK TH-32LHD7UXS TH-32LHD7EK TH-32LHD7ES TH-32LHD7BK TH-32LHD7BS
LL10 Chassis
SPECIFICATIONS
Specifications
Power Source UY/UXK/UXS Version) Power Source EK/ES/BK/BS Version) Power Consumption UY/UXK/UXS Version) Maximum Stand-by condition Power off condition Power Consumption EK/ES/BK/BS Version) Normal use Stand-by condition Power off condition LCD Display panel Contrast Ratio Screen size (No. of pixels) Operating condition Temperature Humidity Applicable signals Colour System Scanning format
120 V AC, 50 / 60 Hz 220 - 240 V AC, 50 / 60 Hz
234W Save OFF 0.8 W, Save ON 0.6 W 0.2 W
165 W Save off 1.0 W, Save on 0.8 W 0.4 W 1,366 × 768 pixels widescreen LCD panel 800:1 697.7 mm (W) × 392.3 mm (H) × 800.4 mm (diagonal) 1,049,088 (1,366 (W) × 768 (H)) [4,096 × 768 dots] 32 ° F - 104 ° F (0 ° C - 40 ° C) 20 % - 80 % NTSC, PAL, PAL60, SECAM, Modified NTSC 525 (480) / 60i 50i 24p 60p, 625 (575) / 50i 30p 50p, 750 (720) / 60p 50p, 1125 (1080) / 60i
25p
24sF ... SMPTE274M, 1250 (1080) / 50i
PC signals
WXGA display SVGA, XGA, SXGA, UXGA ... (compressed) Horizontal scanning frequency 15 - 110 kHz Vertical scanning frequency 48 - 120 Hz
Connection terminals AV (EK/ES/BK/BS/UY Version) VIDEO IN (BNC) VIDEO OUT (BNC) S VIDEO IN (MINI DIN 4PIN) AUDIO IN (RCA PIN JACK × 2) COMPONENT / RGB (EK/ES/BK/BS/UY Version) Y / G (BNC) 1.0 Vp-p (75-ohm or high impedance) 1.0 Vp-p (low impedance) Y: 1.0 Vp-p (75-ohm), C: 0.286 Vp-p ( ohm) 0.5 Vrms (high impedance) Y or G with sync 1.0 Vp-p (75-ohm) G without sync 0.7 Vp-p (75-ohm) 0.7 Vp-p (75-ohm) 0.5 Vrms (high impedance) 0.7 Vp-p (75-ohm) R, G, B : Component
R B / B (BNC), P R / R (BNC) AUDIO IN (RCA PIN JACK × 2) PC
Y: PR /CR,PB /CB: HD, VD : (HIGH-DENSITY D-SUB 15PIN) AUDIO IN (M3 JACK) SERIAL SPEAKERS ( 6 Remote Control Transmitter Batteries Fixing bands Ferrite core Dimensions ( W × H × D ) Mass (Weight) (UY Version) main unit only with speakers Mass (Weight) UXK/UXS Version) main unit only with speakers Mass (Weight) EK/ES/BK/BS Version) main unit only with speakers approx. 17.0 kg net approx. 21.0 kg approx. 36.4 lbs approx. 45.2 lbs approx. 37.5 lbs approx. 46.3 lbs ) EXTERNAL CONTROL TERMINAL (DSUB 9PIN) 16 W [ 8 W + 8 W ] (10 % THD) EUR646535 AA/UM3/R6 Size × 2 (TMME203) × 2 J0KF00000018 × 2, J0KG00000054 × 2
1.0 Vp-p (75-ohm) 0.7 Vp-p (75-ohm) 1.0 - 5.0 Vp-p (high impedance) 0.5 Vrms (high impedance) RS-232C COMPATIBLE
Accessories Supplied
805 mm × 499.6 mm × 102 mm (exclusive of protruding portion)
Notes: Design and specifications are subject to change without notice.Mass and dimensions shown are approximate. This equipment (EK/ES/BK/BS Version) complies with the EMC standards listed below. EN55013, EN55020, EN55022, EN55024, EN61000-3-2, EN61000-3-3.
1
2. Safety Precautions
2.1. General Guidelines
1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or da |