Aiwa XR-MD510 XR-MD511 (Supplement) free download

File name XRMD 510-511_Supp.pdf

XR-MD510 D,K XR-MD511 EZ SERVICE MANUAL MD / CD BASIC TAPE MECHANISM : 2ZM-1 YR9NF BASIC CD MECHANISM : 3ZG-3 YE3NC STEREO SYSTEM BASIC MD MECHANISM : AZG-4A MODEL CODE : 8ACJ4-0130 (S) 8ACJ4-0133 (SM) SYSTEM SPEAKER XR­MD510/511 SX-M510 · · This Service Manual contains the additional information "DISASSEMBLY INSTRUCTION" and "TEST MODE" for the model XR-MD510/511(K/EZ). If requiring the other information, see Service Manual of XR-MD510(D,K) / 511(EZ), (S/M Code No. 09-004-422-8R1). NT ME LE A PP DAT S/M Code No. 09-004-422-8S1 SU DISASSEMBLY INSTRUCTION 1 2 1 2 R L 1 2 2 1 2 3 3 1 2 1 2 1 2 1 2 4 1 2 5 SERVICE JIG AND TOOLS 1 2 3 6 DISASSEMBLY INSTRUCTION 1. Removing the outside appearance parts 1) Remove the six screws (1-4, 2-2) and remove the PANEL SIDE R. 2) Remove the six screws (1-4, 2-2) and remove the PANEL SIDE L. R L 3) Remove the three screw 1 and lift up the PANEL, TOP ASSY 2. 4) Remove the two connectors and remove the PANEL, TOP ASSY. 7 5) Remove the 11 screws and remove the CABI, REAR. 6) This is the state after the outside appearance parts are removed. 2. Removing the PWB, CD ACJ-4 1) Remove the five screws, pull out the FFC and other parts, then remove the PWB, CD ACJ-4. 3. Removing the PWB, MAIN ASSY 1) Remove the screw 1, then remove the connector 2 and the FFC 3 of the MD block. 8 2) Remove the screw 1 and remove the PWB, MAIN ASSY 2 in the direction of the arrow. (The board is hooked. While lifting up the HOOK, remove the board.) 4. Removing the FRONT block 1) Remove the screw 1 securing the CAB, FR ASSY and remove the screw 2 securing the CHAS, MD. 2) Remove the screw 1 securing the CAB, FR A