File name BE1_manual.pdfHT-BE1/SA-WBE1/SS-BE1
SERVICE MANUAL
Ver. 1.3 2005. 05
US Model Canadian Model AEP Model UK Model E Model
The HT-BE1 system consists of one unit of SA-WBE1 and five units of SS-BE1.
SA-WBE1
SS-BE1
This system incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights reserved. ** Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc. © 1996 Digital Theater Systems, Inc. All rights reserved.
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, both channels driven, from 120 10,000 Hz; rated 19 watts per channel minimum RMS power, with no more than 10 % total harmonic distortion from 220 milliwatts to rated output. SA-WBE1 (subwoofer)
Max. output Subwoofer: 30 W (6 ohms) Front: 15 W + 15 W (6 ohms) Center*: 15 W Rear*: 15 W + 15 W * Depending on the sound field settings and the source, there may be no sound output. Speaker system Bass reflex type Speaker unit 130 mm (5 1/8 inches) dia. cone type Dimensions (approx.) 215 × 271 × 302 mm (8 1/2 × 10 3/4 × 12 inches) (w/h/d, not including the projecting parts) Mass (approx.) US, CND model: 6.3 kg (13 lb 15 oz ) AEP, UK, SP, MY model: 6.4 kg (14 lb 2 oz )
General
Power requirements US, CND, MX model: AEP, UK model: SP, MY model: Power consumption US model: CND, MX model: AEP, UK, SP, MY model: Operating temperature Operating humidity Supplied accessories 120 V AC, 60 Hz 230 V AC, 50/60 Hz 220-240 V AC, 50/60 Hz 60 W 1.0 W (at the Power Saving Mode) 75 W 1.0 W (at the Power Saving Mode) 45 W 0.3 W (at the Power Saving Mode) 5°C to 35°C (41°F to 95°F) 5 % to 90 % Speaker cords (3 m (10 ft) × 3, 8 m (26 ft) × 2) Optical digital cord (1) (US, CND, SP, MY model) Coaxial digital cord (1) (AEP, UK model) Remote commander (remote) RM-BE1 (1) Size AA (R6) batteries (2)
Design and specifications are subject to change without notice. · Abbreviation CND : Canadian model SP : Singapore model MY : Malaysia model MX : Mexican model
SS-BE1 (satellite speakers)
Speaker system Speaker unit Rated impedance Dimensions (approx.) Mass (approx.) Closed box type 50 mm (2 inches ) dia. cone type 6 ohms 61 × 82 × 65.5 mm (2 1/2 × 3 1/4 × 2 5/8 inches) (w/h/d) 175 g (7 oz)
HOME THEATER SYSTEM
9-874-031-04
2005E04-1 © 2005. 05
Sony Corporation
Audio Group Published by Sony Engineering Corporation
1
HT-BE1/SA-WBE1/SS-BE1
SAFETY CHECK-OUT
After correcting the original service problem, perform the following safety check before releasing the set to the customer: Check the antenna terminals, metal trim, "metallized" knobs, screws, and all other exposed metal parts for AC leak |