File name HS-HD1100U_Service_Manual.pdf2002
MITSUBISHI
VIDEO CASSETTE RECORDER
MODEL
HS-HD1100U
Only cassettes marked D-VHS or VHS can be used with this video cassette recorder.
SPECIFICATIONS
Tape Format Power Source Power Consumption Video Signal System Video Recording System Luminance Color Signal Hi-Fi Audio Recording System Linear Audio Track Maximum Recording Time D-VHS VHS : VHS NTSC standard with Hi-Fi audio and D-VHS standard : 120 V AC ; 60 Hz : Approx. 25 W (standby 6.0 W) : EIA standard ; NTSC color : VHS standard/D-VHS standard : Frequency modulation recording : Low frequency conversion sub-carrier phase shift recording : VHS standard Azimuth helical scanning system : 1 track : 150 min. with DF-300 video cassette (HS) 300 min. with DF-300 video cassette (STD) : 120 min. with T-120 video cassette (SP) 360 min. with T-120 video cassette (EP) : 0.5 to 2.0 V(p-p), 75 unbalanced RCA pin Jack : 346 mV(rms), 47 k Audio Input unbalanced RCA pin Jack : 1.0 V(p-p), 75 unbalanced Video Output RCA pin Jack : 346 mV(rms), 1 k unbalanced Audio Output RCA pin Jack : based on IEEE 1394 digital Digital Interface interface, 4 pin, corresponds to S400 Input/Output : 54 to 88 MHz, 174 to 216 MHz Tuner VHF : 470 to 806 MHz UHF CATV : 54 to 88 MHz, 90 to 804 MHz Operating Temperature : 41 °F to 104 °F : 30 % to 80 % Relative Humidity : Channel 3 or 4 switchable RF Channel Output : Approx. 9.5 lbs (4.3 kg) Weight : 16.7"(W) × 3.7"(H) × 12.0"(D) Dimensions Timer Program Capacity : 1 month programmable / 16 programs : Approx. 30 minutes Memory Backup Time : Deck Deck Video Input
Record/Playback System Video : 4 heads Audio : 2 Hi-Fi channels and 1 monoral audio control Digital : HS 4 heads STD 2 heads : Approx. 43 seconds for T-120 cassette Rewind Time
· Weight and dimensions shown are approximate. · Design and specifications are subject to change without notice.
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.
9351 Jeronimo Ave. Irvine, California 92618 U.S.A.
Copyright C 2002 Mitsubishi Digital Electronics America, Inc. All Rights Reserved.
CONTENTS
SPECIFICATIONS ...1 CONTENTS...2 GLOSSARY OF ABBREVIATIONS ...4 2-15. SAFETY PRECAUTIONS ...1 CONNECTION ...3 WARNING...3 DISASSEMBLY ...4 HOW TO EXECUTE CIRCUIT BOARD SERVICE ...7 CHIP PARTS REPLACEMENT ...11 2-16 PULLEY GEAR ASSY, SLIP GEAR, SLIP SPRING, THRUST WASHER, SLIP WASHER, SLIP ADJUSTER, IDLER 2 UNIT...9 CAPSTAN BRAKE SPRING, CAPSTAN BRAKE ASSY...11 FC HOLDER, MOTOR HOLDER, LOADING WORM, LOADING MOTOR ASSY, WORM WHEEL ... |