File name Denon-DNX1500 mix.pdfFor U.S.A., Canada, Europe,
Oceania & Asia model
Ver. 1
SERVICE MANUAL
MODEL DN-X1500
DJ MIXER
For purposes of improvement, specifications and
design are subject to change without notice.
Please use this service manual with referring to ,
the operating instructions without fail.
Some illustrations using in this service manual are
slightly different from the actual set.
16-11, YUSHIMA 3-CHOME, BUNKYO-KU, TOKYO 113-0034 JAPAN
X-0196V.01 DE/CDM 0401
DN-X1500 2
SAFETY PRECAUTIONS
LEAKAGE CURRENT CHECK
LASER RADIATION
500V
1M
(1)
(2)
(1)
(2)
2
DN-X1500 3
DISASSEMBLY
(Follow the procedure below in reverse order when reassembling.)
1. Top Panel Unit
(1)Remove 9 screws and pull up Top Panel Unit.
(2)Disconnect FFC cable and Connector.
(3)Detach Top Panel Unit.
Note: Do not pull out aslsnt to prevent FFC cable damage.
Do not fail to pull AC cord from wall outlet before
disconnect the FFC cable.
if AC cord is remained plugged into wall outlet,
power is kept supplied in the unit, which may cause
danger.
Top Panel Unit
2. Cross Feder Unit
(1)Remove 2 screws and pull up Cross Feder Unit.
(2)Disconnect Connector.
Cross Feder Unit
Connector
Label face
3
DN-X1500 4
3. CH Fader Unit
(1)Remove 4 knobs.
(2)Remove 4 screws and pull up CH Fader Panel.
(3)Remove 2 screws for each CH.
(4)Disconnect Connector.
(5)Detach CH Fader Unit.
4. Front Panel
(1)Pull out the knobs.
(2)Remove 8 screws.
(3)Pull up Front Panel.
Front Panel
4
DN-X1500 5
SERVICE MODE SPECIFICATION
*How the product performs when the operation buttons for com control are pressed (including control inp |