Harman/Kardon HK990 free download

File name HarmanKardon-HK990 amp.pdf

harman/kardon Service Manual HK 990/230 2 x 200W INTEGRATED STEREO AMPLIFIER Released EU2009 harman/kardon, Inc. 250 Crossways Park Dr. Woodbury, New York, 11797 Rev 0, 03/2009 Specifications Continuous Average Power Per Channel (FTC) 20 Hz ­ 20 kHz, both channels driven Dynamic Power (IHF, 1 kHz Tone Burst) High instantaneous current capability (HCC) Power Bandwidth @ Half-Rated output, 8 Frequency response @ 1W (+0/-3dB) Damping factor (20Hz-20k Hz) Signal-to-noise Ratio (Reference rated power output, A-WTD) Input sensitivity/Impedance 8 Ohms: 4 Ohms: 8 Ohms: 4 Ohms: NOMINAL 150 Watts@<0.03%THD 300 Watts@<0.3%THD 220 Watts 440 Watts ±200 Amps 20 Hz - 100 kHz 5 Hz - 120 kHz >200 100 dB 75 dB 350 mV/43k Ohms 10 mV/47k Ohms 1 mV/100 Ohms 2.8V 85 mV 8.5 mV ±10 dB/±10 dB AC 230V, 50 Hz 1000 W 1W 440 x 160 x 444 mm 24 kg Overload Tuner/CD Phono (MC): Tuner/CD Phono (MM): Phono (MC): Tuner/CD Phono (MM): Phono (MC): Tone control range, Bass @ 100 Hz/Treble @ 10 kHz Power supply Power consumption Standby power consumption Dimensions (Width x Height x Depth) Depth includes Volume Button and Loudspeaker Terminals Weight 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com Harman Consumer Group International: 2, Route de Tours, 72500 Chвteau-du-Loir, France © 2008 Harman Kardon, Incorporated Part no. 8509 9012 0000 1 Controls and Functions Power Indicator: This LED will illuminate in amber when the unit is in the Standby mode to signal that the unit is ready to be turned on. When the unit is in operation, the indicator will turn white. System Power Control: Press this button to turn on the HK 990; press it again to turn the unit off (to Standby). Entering Standby also saves all Setup parameters. Speaker 1/2 Selectors: Press to select speaker pair 1 or 2, or both, or neither (headphone output only). Record Out Selector: First press shows the record source presently selected in the display. Pressing on the the Source selectors within a few seconds after pressing changes the record source. Exit this function by pressing again, or wait for a few seconds until exit takes place automatically. Input Source Selector: Select input source for listening by pressing one of the "Source" buttons repeatedly to scroll through all the Inputs either forwards or backwards, until the display shows the desired source. Input Setup Button: Press this Button to enter/exit the Input Setup Mode. Here you can select the physical connection for each source (Analog/Digital etc.) as well as Gain, Bass/Treble etc. Refer to the Setup section of this manual. Speaker Setup Selector: Press this Button to enter the Speaker Setup Menu, where you can switch subwoofers on and off, select crossover frequency, run automatic speaker setup (EzSet/EQ) etc. Refer to the Setup section of this manual. Up/Down Arrow Buttons: Press to scroll through various options for adjustment in a menu. Left/Right Arrow Buttons: Press to increase/decrease a parameter or to select bet