File name Sony-STRDB830_930 rec.pdfSTR-DB830/DB930/V929X
SERVICE MANUAL
US Model
STR-DB930/DB830
Canadian Model
STR-DB930
AEP Model
STR-DB930/DB830
E Model Australian Model
STR-DB930
Chinese Model
Photo : STR-DB930 (BLACK model)
STR-V929X
Manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double-D symbol a are trademarks of Dolby Laboratories Licensing Corporation.
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION : With 8 loads, both channels driven, from 20 - 20,000 Hz ; rated 110 W (STR-DB930) and 100 W (STR-DB830) per channel minimum RMS power, with no more than 0.05 % total harmonic distortion from 250 mW to rated output (USA model only). Amplifier section POWER OUTPUT Stereo mode North American model (8 20 Hz - 20 kHz, THD 0.05 %) STR-DB930 : 110 W + 110 W STR-DB830 : 100 W + 100 W (4 20 Hz - 20 kHz, THD 0.05 %) STR-DB930 : 100 W + 100 W STR-DB830 : 90 W + 90 W Other model 100 W + 100 W (8 DIN 1kHz) 100 W + 100 W (4 DIN 1kHz) 90 W + 90 W (8 20Hz-20kHz,thd0.05%) 90 W + 90 W (4 20Hz-20kHz,thd0.05%) Surround mode North American model (8 20 Hz - 20 kHz, THD 0.09 %) STR-DB930 : Front : 110 W + 110 W Centera) : 110 W Reara) : 110 W + 110 W STR-DB830 : Front : 100 W + 100 W Centera) : 100 W Reara) : 100 W + 100 W (4 20 Hz - 20 kHz, THD 0.09 %) STR-DB930 : Front : 100 W + 100 W Centera) : 100 W Reara) : 100 W + 100 W STR-DB830 : Front : 90 W + 90 W Centera) : 90 W Reara) : 90 W + 90 W Other model (8 20 Hz - 20 kHz, THD 0.09 %) Front : 90 W + 90 W : 90 W Centera) : 90 W + 90 W Reara) (4 20 Hz - 20 kHz, THD 0.05 %) Front : 90 W + 90 W Centera) : 90 W Reara) : 90 W + 90 W a) Depending on the sound field settings and the source, there may be no sound output. Dynamic power output STR-DB930 : 165 W + 165 W, 8 250 W + 250 W, 4 STR-DB830 : 155 W + 155 W, 8 240 W + 240 W, 4 Frequency response PHONO : RIAA equalization curve ±0.5 dB CD, TAPE, MD/DAT, TAPE/MD, DVD/LD, TV/SAT, VIDEO 1,2, andVIDEO3: 10 Hz - 50 kHz + 0.5/-2 dB(with sound field, equalizer, and bass boost bypassed) Inputs(Analog) PHONO : Sensitivity : 2.5 mV Impedance : 50 k S/Nb) : 86 dB(A, 2.5 mVc))
-- Continued on next page --
FM STEREO FM-AM RECEIVER
MICROFILM
5.1CH INPUT, CD, DVD/LD, TAPE, MD/DAT, TAPE/MD, TV/SAT, VIDEO 1, 2, and VIDEO 3 : Sensitivity : 150 mV Impedance : 50 k S/Nb) : 96 dB(A, 150 mVc)) b) INPUT SHORT c) Weighted network, input level Input(Digital) DVD/LD (coaxial) : Sensitivity : Impedance : 75 S/N : 100 dB(A, 20 kHz LPF) DVD/LD, TV/SAT, MD/DAT (Optical) Sensitivity : Impedance : S/N : 100 dB(A, 20 kHz LPF) Outputs TAPE, MD/DAT, TAPE/MD, (REC OUT) ; VUDEO 1, 2 (AUDIO OUT) : Voltage : 150 mV Impedance : 10 k FRONT L/R, CENTER, REAR L/R, SUB WOOFER : Voltage : 2V Impedance : 1 k PHONES : Accepts low-and high-impedance headphones BASS BOOST +6 dB at 70 Hz Sampling Frequency 48 kHz EQ BASS : 100 Hz - 1.0 kHz(21 steps) MID : 500 Hz - 5.0 kHz(21 steps) TREBLE : 1.0 kHz - 10 kHz(21 steps) Gain levels : ±10 dB, 1 dB ste