Onkyo TXSR500E free download

File name Onkyo-TXSR500E rec.pdf

TX-SR500/E Ref. No. 3727 042002 SERVICE MANUAL AV RECEIVER MODEL TX-SR500/E Black, Golden and Silver models 120V AC, 60Hz BMPP,SMPP,BMPA,GMPA 230-240V AC, 50Hz BMWT,GMWT,GMWR,GMWQ 120/220-230V AC, 50/60Hz GMGK 220V AC, 50Hz BMDD,BMDC SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ON THE SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK. REPLACE THESE COMPONENTS WITH ONKYO PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL. MAKE LEAKAGE-CURRENT OR RESISTANCE MEASUREMENTS TO DETERMINE THAT EXPOSED PARTS ARE ACCEPTABLY INSULATED FROM THE SUPPLY CIRCUIT BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. 1 TX-SR500/E SPECIFICATIONS AMPLIFIER SECTION Continuous Average Power output (FTC) All channels: 65 watts per channel min. RMS at 8 ohms, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. Continuous Power output (DIN)85 watts 5 at 6 ohms Maximum Power output (EIAJ) 115 watts 5 at 6 ohms Dynamic power output: 160 watts 2 at 3 ohms 125 watts 2 at 4 ohms 85 watts 2 at 8 ohms Total Harmonic Distortion: 0.08% at rated power 0.08% at 1 watt output IM Distortion: 0.08% at rated power 0.08% at 1 watt output Damping Factor: 60 at 8 ohms Input Sensitivity and Impedance DIGITAL INPUT (OPTICAL 1, 2): 0.5 Vp-p, 75 ohms DIGITAL INPUT (COAXIAL): 0.5 Vp-p, 75 ohms LINE (CD, VIDEO 1, 2, 3, TAPE): 200 mV, 50 kohms Multichannel Input (DVD FRONT L/C/R, SURR L/R): 200 mV, 50 kohms (SUBWOOFER): 36 mV, 50 kohms Output Level and Impedance Rec out (TAPE, VIDEO 1): 200 mV, 470 ohms Pre out (SUBWOOFER): 1 V, 470 ohms 10 Hz to 10 kHz, +1/-3 dB (Direct mode) Frequency Response: Tone Control Bass: ±12 dB at 50 Hz Treble: ±12 dB at 20 kHz Signal-to-Noise Ratio: CD/TAPE: 100 dB (IHF-A, Direct mode) Muting: -50 dB 50 dB Quieting Sensitivity Mono: 17.2 dBf, 2.0 µV (75 ohms) Stereo: 37.2 dBf, 20.0 µV (75 ohms) Capture Ratio: 2.0 dB Image Rejection Ratio North American models: 40 dB Other models: 85 dB IF Rejection Ratio: 90 dB Signal-to-Noise Ratio Mono: 76 dB, IHF Stereo: 70 dB, IHF Alternate Channel Attenuation: 55 dB, IHF, ±400 kHz Selectivity: 50 dB (DIN) AM Suppression Ratio: 50 dB Total Harmonic Distortion Mono: 0.2% Stereo: 0.3% Frequency Response: 30 Hz-15 kHz, ±1.0 dB Stereo Separation: 45 dB at 1 kHz 30 dB at 100 Hz-10 kHz AM Tuning Range North American models: 530-1,710 kHz (10 kHz steps) European & Australian models: 522-1,611 kHz (9 kHz steps) Worldwide models: 531-1,602 kHz (9 kHz steps), 530-1,710 kHz (10 kHz steps) Usable Sensitivity: 30 µV Image Rejection Ratio: 40 dB IF Rejection Ratio: 40 dB Signal-to-Noise Ratio: 40 dB Total Harmonic Distortion: 0.7% GENERAL Power Supply and Power Consumption: AC 120 V, 60 Hz 4.0 A AC 230-240 V, 50 Hz 320 W AC 220-230 V and 120 V switchable, 50/60 Hz 320 W 17-1/8" 5-7/8" 14-13/16" 435 150 376 mm 18.7 lbs., 8.5 kg 19.4 lbs., 8.8 kg Infrared Approx. 16 ft., 5 meters Two "AA " batteries (1.5 V 2) VIDEO SECTION Input Sensitivity a