Sony TADA9000ES free download

File name Sony-TADA9000ES amp.pdf

TA-DA9000ES SERVICE MANUAL Ver 1.2 2004.09 AEP Model E Model This amplifier incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby , Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. ** DTS , DTS-ES Extended Surround , and Neo:6 are trademarks of Digital Theater Systems, Inc. SPECIFICATIONS Amplifier section POWER OUTPUT Rated Power Output at Stereo Mode1) (8 ohms, 20 Hz - 20 kHz, THD 0.15%) 200 W + 200 W (4 ohms, 20 Hz - 20 kHz, THD 0.15%) 220 W + 220 W Reference Power Output (8 ohms, 1 kHz, THD 0.09%) FRONT2): 200 W + 200 W CENTER2): 200 W SURR2): 200 W + 200 W SURR BACK2): 200 W + 200 W (4 ohms, 1 kHz, THD 0.09%) FRONT2): 220 W + 220 W CENTER2): 220 W SURR2): 220 W + 220 W SURR BACK2): 220 W + 220 W 1) Depending on the sound field settings and the source, there may be no sound output. 2) Measured under the following conditions: Area code Power requirements Power Amp Block 10 Hz - 50 kHz ± 3 dB (8 ohms) TAPE, MD/DAT Voltage: 170 mV (REC OUT), VIDEO Impedance: 2.2 kilohms 1, 2, 3 (AUDIO OUT) FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUB WOOFER EQUALIZER Gain levels ±10 dB, 1 dB step Voltage: 2 V Impedance: 220 ohms Inputs (Analog) PHONO Sensitivity: 3.5 mV Impedance: 50 kilohms S/N3): 90 dB (A, 40 mV4)) CD/SACD, TAPE, Sensitivity: 170 mV MD/DAT, DVD, LD, Impedance: 50 kilohms TV/SAT, VIDEO 1, 2, S/N3): 100 dB (A, 2V4)) 3, 4, 5 3) Input shorted and sealed at VOL MAX. 4) Weighted network + 20 kHz LPF, input level. Inputs (Digital) CD/SACD, DVD, LD, Impedance: 75 ohms VIDEO 1, TV/SAT S/N: 100 dB (Coaxial) (A Network, 20 kHz LPF) CD/SACD, DVD, LD, S/N: 100 dB TV/SAT, MD/DAT, (A Network, 20 kHz LPF) VIDEO1, 3 (Optical) Outputs Video section Inputs/Outputs Video: S-video: 1 Vp-p, 75 ohms Y: 1 Vp-p, 75 ohms C: 0.286 Vp-p, 75 ohms COMPONENT VIDEO:Y: 1 Vp-p, 75 ohms PB/CB/B-Y: 0.7 Vp-p, 75 ohms PR/CR/R-Y: 0.7 Vp-p, 75 ohms CEL TW KR Frequency response PHONO 230 V AC, 50/60 Hz 110 V AC, 60 Hz 230 V AC, 60 Hz ­ Continued on next page ­ RIAA equalization curve ±0.5 dB MULTI-CHANNEL INTEGRATED AMPLIFIER 9-961-291-03 2004I05-1 © 2004.09 Sony Corporation Audio Group Published by Sony Engineering Corporation TA-DA9000ES i.LINK section Pin Transmission speed 4 pins S200 (Maximum data transmission speed 200 Mbps) Transmission protocol A/M transmission protocol Format (input) Super Audio CD* (DSD PLAIN) 2 channel linear PCM (IEC60958-3) Sampling frequency: 44.1 kHz * Conforms to the copy protection technology of DTLA (Revision 1.2). Area code Power requirements Supplied accessories AC power coad (1) Easy Setup Guide (1) Remote commander RM-LJ312 (1) Operating Instructions for RM-LJ312 (1) R6 (size-AA) batteries (3) Design and specifications are subject to change without notice. Korean 220 V AC, 60 Hz Power consumption 600 W Power consumption (during standby mode) 1W AC outlets Area code AC outlets AEP except AEP Di