SONY STR-DG510 free download

File name SONY STR-DG510.pdf

STR-DG510 SERVICE MANUAL Ver. 1.2 2007. 05 US Model Canadian Model AEP Model UK Model E Model Australian Model Photo: Black type Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Surround" are registered trademarks of DTS, Inc. This receiver incorporates High-Definition Multimedia Interface (HDMITM) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. SPECIFICATIONS AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code US only) With 8 ohm loads, both channels driven, from 20 ­ 20,000 Hz; rated 90 watts per channel minimum RMS power, with no more than 0.09 % total harmonic distortion from 250 milliwatts to rated output. Amplifier section Models of area code US, CND 1) Minimum RMS Output Power (8 ohms, 20 Hz ­ 20 kHz, THD 0.09%) 90 W + 90 W Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 100 W + 100 W Surround Mode Output Power 2) (8 ohms 1 kHz, THD 10%) 130 W/ch Models of area code AEP, UK 1) Minimum RMS Output Power (8 ohms, 20 Hz ­ 20 kHz, THD 0.09%) 85 W + 85 W Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 100 W + 100 W Surround Mode Output Power 2) (8 ohms, 1 kHz, THD 10%) 130 W/ch Models of area code E2, AUS, KR, TW 1) Minimum RMS Output Power (8 ohms, 20 Hz ­ 20 kHz, THD 0.09%) 70 W + 70 W Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 90 W + 90 W Surround Mode Output Power 2) (8 ohms, 1 kHz, THD 10%) 120 W/ch ­ Continued on next page ­ MULTI CHANNEL AV RECEIVER 9-887-536-03 2007E04-1 © 2007. 05 Sony Corporation Home Audio Division Published by Sony Techno Create Corporation 1 STR-DG510 Ver. 1.2 Models of area code MY, SP, TH 1) Minimum RMS Output Power (8 ohms, 20 Hz ­ 20 kHz, THD 0.09%) 60 W + 60 W Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%) 80 W + 80 W Surround Mode Output Power 2) (8 ohms, 1 kHz, THD 10%) 120 W/ch 1) Measured under the following conditions: Area code Power requirements US, CND 120 V AC, 60 Hz AEP, UK, MY, SP, TH 230 V AC, 50 Hz E2, AUS 240 V AC, 50 Hz TW 110 V AC, 60 Hz KR 220 V AC, 60 Hz 2) Reference power output for front, center and surround speakers. Depending on the sound field settings and the source, there may be no sound output. Frequency response Analog General Power requirements Area code US, CND AEP, UK E2 AUS MY, SP, TH KR TW Power consumption Area code US, AEP, UK, E2, AUS, KR CND MY, SP, TH TW Power requirements 120 V AC, 60 Hz 230 V AC, 50/60 Hz 120/220/240 V AC, 50/60 Hz 240 V AC, 50 Hz 230 ­ 240 V AC, 50/60 Hz 220 ­ 230 V AC, 50/60 Hz 110 V AC, 60 Hz Power consumption 220 W 300 VA 200 W 500 W 10 Hz ­ 70 kHz +0.5/­2 dB (with sound field and tone bypassed) Sensitivity: 500 mV/ 50 kohms S/N 3) : 96 dB (A, 500 mV 4) ) Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) S/N: 100 dB (A, 20 kHz LPF) Voltage: 500 mV/10 kohms Voltage: 2 V/1 kohm ±6 dB, 1 dB step Inputs