File name LG - 50PG200R.pdfInternal Use Only
website:http://biz.LGservice.com
PLASMA TV
SERVICE MANUAL
CHASSIS : PP81B
MODEL : 50PG200R 50PG200R-ZA
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
CONTENTS
CONTENTS ... 2
SAFETY PRECAUTIONS ...3
SPECIFICATION ...4
ADJUSTMENT INSTRUCTION ...6
TROUBLE SHOOTING ...16
BLOCK DIAGRAM...23
EXPLODED VIEW ... 24
SVC. SHEET ...
PRINTED CIRCUIT DIAGRAM ...
Copyright©2008 LG Electronics. Inc. All right reserved. -2- LGE Internal Use Only
Only for training and service purposes
SAFETY PRECAUTIONS
IMPORTANT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the
Schematic Diagram and Replacement Parts List.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent
X-RADIATION, Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.
General Guidance Leakage Current Hot Check (See below Figure)
Plug the AC cord directly into the AC outlet.
An isolation Transformer should always be used during the Do not use a line Isolation Transformer during this check.
servicing of a receiver whose chassis is not isolated from the AC Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor
power line. Use a transformer of adequate power rating as this between a known good earth ground (Water Pipe, Conduit, etc.)
protects the technician from accidents resulting in personal injury and the exposed metallic parts.
from electrical shocks. Measure the AC voltage across the re |