McIntosh MVP841 free download

File name McIntosh-MVP841 cd-dvd.pdf

DVD/VIDEO CD/CD PLAYER CONTENTS Performance Specifications ... 2 Notes ... 2 Safety Information ... 2 Rear Panel ... 3 Section Location ... 3 Block Diagram ... 4 Interconnection Diagram ... 5 - 6 Main ... 7 Connector Schematic and PCB ... 8 A/V Power Supply Schematic and PCB ... 9 - 14 Display Schematic and PCB ... 15 - 18 Parts List ... 19 - 20 Exploded View and Parts List ... 21 - 22 Repacking Instructions ... 23 SERVICE MANUAL PERFORMANCE SPECIFICATIONS VIDEO SPECIFICATIONS Signal System: Component Video Y Output Level: Component Video PB Output Level: Component Video PR Output Level: Output Connector: S-Video Output Level: S-Video C Output Level: Output Connector: Video Output Level: Output Connector: AUDIO SPECIFICATIONS Number Of Channels: Output Level: DVD Frequency Response: CD Frequency Response: CD Signal To Noise Ratio: DVD Dynamic Range: CD Dynamic Range: Harmonic Distortion: Channel Separation: DIGITAL AUDIO OUTPUT Optical: NTSC 1Vp-p (75 ohm) 0.7Vp-p (75 ohm) 0.7Vp-p (75 ohm) RCA Jack (Y: Green, PB: Blue, PR: Red) 1Vp-p (75 ohm) 0.286Vp-p (75 ohm) (NTSC) Mini DIN 1Vp-p (75 ohm) RCA Jack 2 2.2Vrms 4-22kHz (48kHz Sampling, Linear Audio) 4-44kHz (96kHz Sampling, Linear Audio) 4-20kHz Better than 110dB (A-weighted) Better than 100dB (Linear Audio) Better than 98dB 0.003% (1kHz) Better than 110dB (1kHz) -15dbm to -21dbm Output Connector: Coaxial: Output Connector: Digital Signal Format: PICKUP Laser Power: Laser Beam Wavelength: GENERAL SPECIFICATIONS Power Requirements 100 Volts, 50/60Hz at 30 watts 110 Volts, 50/60Hz at 30 watts 120 Volts, 50/60Hz at 30 watts 220 Volts, 50/60Hz at 30 watts 230 Volts, 50/60Hz at 30 watts 240 Volts, 50/60Hz at 30 watts Note: Refer to the rear panel of the MVP841 for the correct voltage. Optical Connector 0.5V p-p/75 ohm RCA Jack 44.1kHz, 48kHz and 96kHz CLASS II 655nm Dimensions Front Panel:17-1/2 inches (44.5cm) wide, 5-3/8 inches (13.7cm) high, depth behind front mounting panel is 15 inches (38.1cm) including clearance for connectors. Panel clearance required in front of mounting panel is 3/4 inch (1.9cm). Note: When the DVD/CD tray is opened, the panel clearance required in front of mounting panel is 6-3/4 inches (17.2cm). NOTES 1. The heavy notes on the schematic denote the primary signal path. 2. Unless otherwise noted, all voltages indicated on the schematics are measured un