DAEWOO free download

File name DAEWOO CP185L CP185G CHASSIS TV SM.pdf

S/M No. : TCP185LGF0 Color Television CHASSIS : CP-185L and CP-185G Specification Version TV Standard Sound system Power consumption Speaker Teletext system Aerial Input Channel coverage Tuning system Visual screen size Channel indication Program selection Pal multi system PAL-SECAM B/G, D/K, H, I/I (NTSC : AV Only) Mono * 1 Speaker 14":49W / 20":60W / 21" 68W * 2Speaker 14":57W / 20":64W / 21":74W 3W 8 Ohm o 7.5W 8 Ohm Option 75 Ohm unbalanced off-air channels, S-cable channels and hyperband Ferquency synthesiser tuning system 14":34cm 20':48cm 21":51cm On screen display 100 Programmes RCA jack : Audio input and Vidio input ERUO SCART Jack : Audio/Video and R/G/B input. Sloe and fast swtching, SVHsin Audio - Video jack on front of cabinet in common connection with EURO-SCART Headphone jack on front of cabinet R-40A10 (None teletext) AAA Battery type R-40A01(With teletext) AAA Battery type R-44C05(With teletext) AA Battery type Auxiliary Outpup Terminal Remote control http : e.co.kr Jul. 2003 TABLE OF CONTENTS SAFETY INSTRUCTION SPECIFICATIONS 21 Pin EURO-SCART 2 3 3 4 5 5 5 5~6 7 8~10 11 12~24 25~27 CIRCUIT BLOCK DIAGRAM ALIGNMENT INSTRUCTIONS 1. Service mode 2. Microcontroller configuration 3. TV SET Alignment SCHEMATIC DIAGRAM EXPLODED VIEW PRINTED CIRCUIT BOARD SERVICE PARTS LIST The different parts list APPENDIX (Appendix is provide only by internet [http://svc.dwe.co.kr]) FUNCTIONAL DESCRIPTION IC DESCRIPTION 1~6 7~42 1 SAFETY INSTRUCTION WARNING : Only competent service personnel may carry out work involving the testing or repair of this equipment X-RAY RADIATION PRECAUTION 1. Excessive high voltage can produce potentially hazardous X-RAY RADIATION. To avoid such hazards, the high voltage must not exceed the specified limit. The nominal value of the high voltage of this receiver is 22-23 kV (14")or 24-26 kV (20"-21")at max beam current. The high voltage must not, under any circumstances, exceed 27.5 kV (14", 20"), 29KV (21"). Each time a receiver requires servicing, the high voltage should be checked. It is important to use an accurate and reliable high voltage meter.). 2. The only source of X-RAY Radiation in this TV receiver is the picture tube. For continued X-RAY RADIATION protection, the replacement tube must be exactly the same type tube as specified in the parts list. SAFETY PRECAUTION 1. Potentials of high voltage are present when this receiver is operating. Operation of the receiver outside the cabinet or with the back cover removed involves a shock hazard from the receiver. 1) Servicing should not be attempted by anyone who is not thoroughly familiar with the precautions necessary when working on high voltage equipment. 2) Discharge the high potential of the picture tube before handling the tube. The picture tube is highly evacuated and if broken, glass fragments will be violently expelled. 2. If any Fuse in this TV receiver is blown, replace it with the FUSE specified in the Replacement Parts List. 3. When replaci