File name Realistic LAB-2100 Turntable.pdfIIilEAM TMfirGffilNffi
DMEGT DM|WE AUTOMATIG TUMNTABIE
CAT. NO.
42-29 |
CUSTOM [/IANUFACTUBED FO
R
a
RAt)IO SHACK, A DIVISION OF TANDY CORPORATION
Your new REALISTIC LAB-2100 Direct Drive Linear Tracking Automatic Turntable uses the latest in audio technology to give the superior sound reproduction audiophiles demand. A powerful brushless DC FG servo motor gives unwaving, near-perfect speed. The stroboscope and bright LED lets you quickly and precisely adjust turntable speed.
The logic-controlled linear tracking arm maintains the stylus of the cartridge at the correct angle to the radius of the groove over the full surface of the record. This means low distortion and excellent tracking at less than 1.5 grams. The Turntable comes complete with Realistic/Audio Technica Dual Magnetic type cartridge with 0.4 x 0.7 mil diamond stylus that reproduces frequency between 20-20,000 Hz while maintaining superior channel
separation.
UNPACKING AND PREPARING FOR USE
When you unpacked your unit, you doubtless noticed how carefully it was packed to avoid damage during transport. Remove the red transportation screw from the bottom cabinet. Keep the packing box and transportation screw for use in case you should need to transport it at some future date.
Figure
1
The lightning flash with
arrowhead
A
CAtJTlOll,
PERSONNEL.
symbol, within an equilateral triangle,
RISK OF ELECTRIC SHOCK
OO NOT OPEN
of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficicnt magnitude to constitute a risk of electric
presence
ELECTRIC
is intended to alert the user to the
TO REDUCE THE RISK OF
shock to persons.
SHOCK, DO NOT REMOV COVER (OR
BACK), NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE
The exclamation point within an quilateral triangle is intended to alert the user to the Presence of
e
important opcrating and maintenance (servicing) instructions in thc [terature accompanying the appliance.
INSTALLATION
Carefully lower the turntable platter onto the motor spindle. Set the rubber mat on the platter.
(See Figure 2.)
Figure 2
R
ubber mat
\>:----41 :-H
spindle
= \S:-Z == |