File name sony_MXD-D5C_service_manual.pdfMXD-D5C
SERVICE MANUAL
US Model Canadian Model AEP Model UK Model
Photo: AEP, UK models
U.S. and foreign patents licensed form Dolby Laboratories Licensing Corporation.
Model Name Using Similar Mechanism CD Section CD Mechanism Type Base Unit Name Optical Pick-up Name Model Name Using Similar Mechanism MD Section MD Mechanism Type Optical Pick-up Name
NEW CDM53G-21BD53 BU-21BD53 OP Assy (A-MAX.2) NEW MDM-7X2A KMS-262A/J1N
SPECIFICATIONS
CD player section
System Laser Laser output Compact Disc digital audio system Semiconductor laser ( = 780 nm) Emission duration: continuous Less than 44.6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Frequency response Signal-to-noise ratio Wow and flutter 5 to 20,000 Hz ±0.5 dB More than 96 dB Below measurable limit MiniDisc digital audio system MiniDisc Semiconductor laser ( = 780 nm) Emission duration: continuous Less than 44.6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Laser diode properties Revolutions (CLV) Error correction Sampling frequency Coding Modulation system Number of channels Material: GaAlAs 800 rpm to 1,800 rpm Advanced Cross Interleave Reed Solomon Code (ACIRC) 44.1 kHz AdaptiveTransform Acoustic Coding (ATRAC)/ATRAC 3 EFM (Eight-to-Fourteen Modulation) 2 stereo channels PHONES Jack type Input impedance Rated input Minimum input Frequency response Signal-to-noise ratio Wow and flutter 5 to 20,000 Hz ±0.5 dB Over 96 dB during playback Below measurable limit
Inputs
ANALOG IN DIGITAL OPTICAL IN
Phono jacks Square optical connector jack
47 kilohms Optical wave length: 660 nm
500 mVrms 125 mVrms
--
--
MD deck section
System Disc Laser Laser output
Outputs
Jack type Rated output Load impedance
Stereo phone 10 mW jack Phono jacks
32 ohms
ANALOG OUT
2 Vrms Over 10 kilohms (at 50 kilohms)
Continued on next page
COMPACT DISC MINIDISC DECK
General
Power requirements Where purchased Power requirements
Supplied accessories
· Audio connecting cords (2) · Remote commander (remote) (1) · Sony R6 (size-AA) batteries (2)
U.S.A. and Canada Europe
120 V AC, 60 Hz 220 - 230 V AC, 50/60 Hz
Power consumption 25 W (less than 1 W at standby) Dimensions (approx.) (w/h/d) incl. projecting parts and controls 430 × 120 × 395 mm Mass (approx.) 6.5 kg
Design and specifications are subject to change without notice.
SELF-DIAGNOSIS FUNCTION
The self-diagnosis function consists of error codes for customers which are displayed automatically when errors occur, and error codes which show the error history in the test mode during servicing. For details on how to view error codes for the customer, refer to the following box in the instruction manual. For details on how to check error codes during servicing, refer to the following "Procedure for using the Self-Diagnosis Function (Error History Display Mode |