File information: | |
File name: | GR-DV3000U_Camera.part2.rar |
Size: | 2041 kB |
Extension: | |
Mfg: | JVC |
Model: | GR-DV3000U 🔎 GRDV3000U |
Original: | GR-DV3000U 🔎 |
Descr: | GR-DV3000U - DIGITAL VIDEO CAMERA - Service Manual, Part list, Schematics |
Group: | Electronics > Consumer electronics > TV |
Uploaded: | 03-11-2004 |
User: | plamensl |
Multipart: | 0 1 2 3 |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 3 | |
File name 86665.pdf SERVICE MANUAL DIGITAL VIDEO CAMERA GR-DV3000U GR-DV3000U SPECIFICATIONS Camcorder General Power supply : DC 6.3 V DC 7.2 V (Using AC Power Adapter/Charger) (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx. 4.3 W LCD monitor on, viewfinder off : Approx. 5.4 W Dimensions (W x H x D) : 76 mm x 90 mm x 194 mm (3" x 3-9/16" x 7-11/16") (with the LCD monitor closed and the viewfinder pushed back in, without the lens hood) Weight : Approx. 660 g (1.4 lbs) (without cassette, memory card and battery) Approx. 740 g (1.7 lbs) (incl. cassette, memory card and battery) Operating temperature : 0°C to 40°C (32°F to 104°F) Operating humidity : 35% to 80% Storage temperature : 20°C to 50°C (4°F to 122°F) Pickup : 1/3.6" CCD Lens : F 1.2, f = 4.5 mm to 45 mm, 10:1 power zoom lens Filter diameter : ø52 mm LCD monitor : 3.5" diagonally measured, LCD panel/TFT active matrix system Viewfinder : Electronic viewfinder with 0.44" color LCD Speaker : Monaural AV Video output Video input Audio output Audio input DV Input/output PHONE Headphone output PRINTER Connectors : : : : 1 V (p-p), 75 , analog 0.5 V (p-p) 2.0 V (p-p), 75 , analog 300 mV (rms), 1 k, analog, stereo 300 mV (rms), 50 k, analog, stereo : 4-pin, IEEE 1394 compliant : ø3.5 mm, stereo : For an optional video printer equipped with a PRINT DATA connector JVC SERVICE & ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP. Head office East Coast Midwest West Coast Atlanta Hawaii : : : : : : 1700 Valley Road Wayne, New Jersey 07470-9976 10 New Maple Avenue Pine Brook, New Jersey 07058-9641 705 Enterprise Street Aurora, Illinois 60504-8149 5665 Corporate Avenue Cypress, California 90630-0024 1500 Lakes Parkway Lawrenceville, Georgia 30043-5857 2969 Mapunapuna Place Honolulu, Hawaii 96819-2040 AC Power Adapter/Charger AA-V40U Power requirement U.S.A. and Canada Other countries Power consumption Output Charge VTR Dimensions (W x H x D) Weight : AC 120 V`, 60 Hz : AC 110 V to 240 V`, 50 Hz/60 Hz : 23 W : DC 7.2 V , 1.2 A : DC 6.3 V , 1.8 A : 68 mm x 38 mm x 110 mm (2-11/16" x 1-1/2" x 4-3/8") : Approx. 250 g (0.56 lbs) (973)317-5000 (973)396-1000 (630)851-7855 (714)229-8011 (770)339-2582 (808)833-5828 Digital Video Camera Format Signal format Recording/Playback format Cassette Tape speed DV format (SD mode) NTSC standard Video: Digital component recording Audio: PCM digital recording, 32 kHz 4-channel (12-bit), 48 kHz 2-channel (16-bit) : Mini DV cassette : SP: 18.8 mm/s LP: 12.5 mm/s : SP: 80 min. LP: 120 min. : : : : Jack Box CU-V504U General Dimensions (W x H x D) Weight : 37.5 mm x 18.5 mm x 55 mm (1-1/2" x 3/4" x 2-3/16") : Approx. 30 g (0.67 lbs) JVC CANADA INC. Head office : 21 Finchdene Square Scarborough, Ontario M1X 1A7 : 16800 Rte Trans-Canadienne, Kirkland, Quebec H9H 5G7 Montreal Vancouver : 13040 Worster Court Richmond, B.C. V6V 2B3 (416)293-1311 (514)871-1311 (604)270-1311 No. 86665 Maximum recording time (using 80 min. cassette) Connectors USB S- | ||
File name 86665par.pdf SECTION 5 PARTS LIST SAFETY PRECAUTION Parts identified by the 5.1 symbol are critical for safety. Replace only with specified part numbers. # REF No. PART No. ----------------------- PART NAME, DESCRIPTION ----------------------------------------------------- ---------------- PACKING AND ACCESSORY ASSEMBLY | ||
File name 86665sch.pdf SECTION 4 CHARTS AND DIAGRAMS NOTES OF SCHEMATIC DIAGRAM Safety precautions The Components identified by the symbol are critical for safety. For continued safety, replace safety critical components only with manufacturer's recommended parts. 1. Units of components on the schematic diagram Unless otherwise specified. 1) All resistance values are in ohm. 1/6 W, 1/8 W (refer to parts list). Chip resistors are 1/16 W. K: KØ (1000Ø), M: MØ (1000KØ) 2) All capacitance values are in µF, (P: PF). 3) All inductance values are in µH, (m: mH). 4) All diodes are 1SS133, MA165 or 1N4148M (refer to parts list). 1 REC mode 2.5 (5.0) PB mode 1.8 PB and REC modes (Voltage of PB and REC modes are the same) 2 3 CIRCUIT BOARD NOTES 1. Foil and Component sides 1) Foil side (B side) : Parts on the foil side seen from foil face (pattern face) are indicated. 2) Component side (A side) : Parts on the component side seen from component face (parts face) indicated. 4. Voltage measurement 1) Regulator (DC/DC CONV) circuits REC : Colour bar signal. PB : Alignment tape (Colour bar). -- : Unmeasurable or unnecessary to measure. 4) Indication on schematic diagram Voltage Indications for REC and PB mode on the schematic diagram are as shown below. 2. Parts location guides Parts location are indicated by guide scale on the circuit board. REF No. IC101 B : Foil side (A : Component side) C : Chip component D : Discrete component) LOCATION IC B C Category : IC 6A Horizontal "A" zone Vertical "6" zone Note: If the voltages are not indicated on the schematic diagram, refer to the voltage charts. 5. Signal path Symbols The arrows indicate the signal path as follows. NOTE : The arrow is DVC unique object. Playback signal path 2. Indications of control voltage AUX : Active at high. AUX or AUX(L) : Active at low. Note: For general information in service manual, please refer to the Service Manual of GENERAL INFORMATION Edition 4 No. 82054D (January 1994). 3. Interpreting Connector indications 1 2 3 1 2 3 Playback and recording signal path Recording signal path (including E-E signal path) Removable connector Capstan servo path Drum servo path Wire soldered directly on board (Example) R-Y Playback R-Y signal path Recording Y signal path 1 2 3 1 2 3 4 Non-removable Board connector Y 6. Indication of the parts for adjustments Board to Board The parts for the adjustments are surrounded with the circle as shown below. Connected pattern on board The arrows indicate signal path 7. Indication of the parts not mounted on the circuit board "OPEN" is indicated by the parts not mounted on the circuit board. R216 OPEN S40889-01 4-1 4-2 S40889-01 4.1 BOARD INTERCONNECTIONS YTU94074-8 YTU94077-8 DECK OPE. CN2431 FOCUS UNIT (Page 4-48) NOTE ) : The number of patch cords are indicated by interconnected. YTU94074-24 YTU94077-24 VF_UNIT F_PTR_AD OP_THRMO Z_PTR_AD FOCUS04 FOCUS03 FOCUS02 FOCUS01 F_LED ZOOM04 ZOOM03 ZOOM02 ZOOM01 HGVcc+ MONI_SW YTU94074-6 YTU94077-6 |
Date | User | Rating | Comment |