panasonic c9uect free download

File name c9uect.pdf

Error Diagnosis Contents Description of error Automatic FL Display Remarks Code F650 USB device: Devices Devices other than the mass storage Press [ STOP] on main other than mass class are connected. unit for next error. storage F651 USB device: Non-Full The device that the transfer rate did not Press [ STOP] on main Speed Device correspond to Full Speed was unit for next error. connected. F652 USB device: The device in the interface (subclass) Press [ STOP] on main Interface NG outside correspondence was connected. unit for next error. (correspondence interface) 001b: Reduced Block Commands (RBC) 010b: SFF-8020i. MMC-2 (ATAPI) 110b: SCSI transparent command set. F655 USB device: The overcurrent of 500mA or more was Press [ STOP] on main Overcurrent detection detected in VDD USB, and the USB unit for next error. device driver function was intercepted. (To intercept the current.) USB is drawing too When the USB system detects a USB USB OVERCURRENT ERROR Switch to DVD/CD mode, much power. device that is taking too much current, (scrolling) remove USB and turn off it will display an "Over current Error" OSD/ the unit. Screen. At this state the USB backend/ system will not be usable temporarily, the corresponding "U**" error code will be send to Opecon, and "USB Overcurrent Error" displayed on the FL.