Text preview for : c9uect.pdf part of panasonic c9uect panasonic Audio SA-PT570EB PSG0901003CE doc c9uect.pdf
Back to : c9uect.pdf | Home
Error
Diagnosis Contents Description of error Automatic FL Display Remarks
Code
F650 USB device: Devices Devices other than the mass storage Press [ STOP] on main
other than mass class are connected. unit for next error.
storage
F651 USB device: Non-Full The device that the transfer rate did not Press [ STOP] on main
Speed Device correspond to Full Speed was unit for next error.
connected.
F652 USB device: The device in the interface (subclass) Press [ STOP] on main
Interface NG outside correspondence was connected. unit for next error.
(correspondence interface)
001b: Reduced Block Commands (RBC)
010b: SFF-8020i. MMC-2 (ATAPI)
110b: SCSI transparent command set.
F655 USB device: The overcurrent of 500mA or more was Press [ STOP] on main
Overcurrent detection detected in VDD USB, and the USB unit for next error.
device driver function was intercepted.
(To intercept the current.)
USB is drawing too When the USB system detects a USB USB OVERCURRENT ERROR Switch to DVD/CD mode,
much power. device that is taking too much current, (scrolling) remove USB and turn off
it will display an "Over current Error" OSD/ the unit.
Screen. At this state the USB backend/
system will not be usable temporarily, the
corresponding "U**" error code will be send
to Opecon, and "USB Overcurrent Error"
displayed on the FL.