Philips p09 free download

File name p09.pdf

Safety Test Requirements 109B2 GS3 CM25 9 Go to cover page All units that are returned for service or repair must pass the original 3. Equipments and Connection manufactures safety tests. Safety testing requires both Hi-pot and Ground Continuity testing. 3.1 Equipments For example : HI-POT TEST INSTRUCTION - ChenHwa 9032 PROGRAMMABLE AUTO SAFETY TESTER - ChenHwa 510B Digital Grounding Continuity Tester 1. Application requirements - ChenHwa 901 (AC Hi-pot test), 902 (AC, DC Hi-pot test) Withstanding Tester 1.1 All mains operated products must pass the Hi-Pot test as described in this instruction. 3.2 Connection 1.2 This test must be performed again after the covers have * Turn on the power switch of monitor before Hipot and been refitted following the repair, inspection or modification Ground Continuity testing. of the product. Clip 2. Test method 2.1 Connecting conditions 2.1.1 The test specified must be applied between the parallel- blade plug of the mainscord and all accessible metal parts of the product. Clip 2.1.2 Before carrying out the test, reliable conductive connections must be ensured and thereafter be maintained throughout the test period. 2.1.3 The mains switch(es) must be in the "ON" position. 2.2 Test Requirements All products should be HiPot and Ground Continuity tested as follows: Condition HiPot Test for HiPot Test for Ground Continuity products where products where Test requirement the mains input the mains input is (ChenHwa 9032 tester) range is Full 110V AC(USA range(or 220V type) Video cable AC) Test 2820VDC 1700VDC Test current: voltage (2000VAC) (1200VAC)