SORENSEN XANTREX XT 60 WATT SERIES free download

File name XANTREX XT 60 WATT SERIES.pdf

INSTRUCTION MANUAL Instruction Manual for XT SERIES Power Supply This manual covers models: 7-6 60-1 15-4 120-0.5 20-3 250-0.25 30-2 TM-6000-SN SORENSEN WARRANTY This unit is guaranteed for five (5) years from the date of delivery against defects in material and workmanship. This does not apply to products damaged through accident, abuse, misuse, or unauthorized repair. The manufacturer shall not be liable for any special or consequential damage of any nature. The manufacturer will repair or replace the non-conforming product or issue credit, at its option, provided the manufacturer's inspection establishes the existence of a defect. Packing, freight, insurance and other charges incurred in returning the defective products to the manufacturer will be paid by the purchaser. The manufacturer will pay return freight if the repaired unit is deemed to be under warranty. If any questions arise concerning the warranty, check with the manufacturer prior to taking any action. When requesting information, assistance, or authorization, please state the model number and serial number of the unit, available from the label on the unit. SAFETY WARNINGS AND CAUTIONS Please review the following points for both personal and equipment safety while operating your power supply. HIGH ENERGY/HIGH VOLTAGE WARNINGS Exercise caution when using and servicing power supplies. High energy levels can be stored at the output voltage terminals on all power supplies in normal operation. In addition, potentially lethal voltages exist in the power circuit and the output connector of power supplies which are rated at 40V and over. Filter capacitors store potentially dangerous energy for some time after power is removed. Use extreme caution when biasing the output relative to the chassis due to potential high voltage levels at the output terminals. AC SOURCE GROUNDING WARNING Ensure the power supply is connected to a grounded AC outlet with the recommended AC input connector configured for the available line voltage as set out in the manual. There is a shock hazard if the power supply chassis and cover are not connected to an electrical ground via the safety ground in the AC input connector. OPERATING AND SERVICE PRECAUTIONS Operate the power supply in an environment free of flammable gases or fumes. Do not use substitute parts or make any unauthorized modifications to the power supply to ens