Sony CMD-Z7 free download

File name SM_CMD-Z7.pdf

6(59,&( 0$18$/ $(30RGHO 8.0RGHO SPECIFICATIONS Signalling format Frequency range Dual-Band E-GSM 900 MHz, Transmit: 880 ~ 915 MHz Receive: 925 ~ 960 MHz GSM 1800 MHz, Transmit: 1710 ~ 1785 MHz Receive: 1805 ~ 1880 MHz Class 4 (2W) Class 1 (1W) 3V and 5V Pluggable mini SIM card / SAT Class 2 High resolution full graphics display 4 Grey-scale type Resolution: 96 x 92 pixels 7 lines (excluding 1 status icon line), proportional font 200 kHz E-GSM 900: 174 GSM 1800: 374 Transmit frequency drift (synchronized) < 0,1 p.p.m Patch antenna E-GSM 900: 2W, 33dbm GSM 1800: 1W, 30dbm Lithium Polymer / 680 mAh Standby : 50 -220 h (Network dependent) Talk time : 2.6 - 8 h (Network dependent) 91 mm x 50 mm x 25 mmс 95 g 90 cmс GSM 900 power class GSM 1800 power class SIM Display Channel spacing Number of channels Frequency stability Antenna type RF output power Battery Dimensions Weight Volume 3257$%/( ',*,7$/ &(//8/$5 7(/(3+21( :,7+ $&&(6625,(6 Power requirements Operating temperature Accessories operating temperature Connectors WAP Email Supplied accessories Optional accessories 3.9 V (nominal) -10C to +55C ± 0C to +45C External RF connector Universal Connector (12-pin flat I/O connector) Mini plug head set jack Supported by the WAP v.1.1 compliant browser WTLS Class 1, HTTP/HTML Supported by the e-mail protocols: SMTP & POP 3 AC Adapter QN-3AC1 (AEP) AC Adapter QN-3AC2 (UK) Battery (std.) QN-Z7BPS Handsfree Car Kit QN-3HFK Car Phone Holder QN-Z7PH Cigar Lighter Charger QN-3CC Data Cable RS QN-3RS Data Cable USB QN-3USB Mobile Data Software QN-3DS Headset QN-3HS Travel Charger QN-3TC Design and specifications are subject to change without notice. This equipment complies with the essential requirements of the Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive. NOTE This device contains electrostatically sensitive components. Damage can occur to these components if the appropriate handling is not adhered to. ESD Handling precautions: A working area in which Digital Cellular Telephones may be safely handled without undue risk of damage from electrostatic discharge must be available. The area must be equipped as follows: Ѕ Ѕ All working surfaces must have a dissipative bench mat, safe for use with live equipment, connected via 1.2M· resistor to a common ground point. A quick release skin contact device with a flexible cord, which has a built-in safety resistor of a range between 5.2K· and 1.2M· shall be used. The flexible cord must be attached to a dissipative earth point. All containers and storage must be of the conductive type. Ѕ Batteries: This device contains an internal battery in addition to the external battery pack. These batteries are recyclable and should be disposed of in accordance with national legislation. They must not be incinerated, or disposed of as ordinary rubbish. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufactur