SONY KV_32HS20_36HS20_32XBR450_36XBR450_36XBR450H free download

File name S0NY KV_32HS20_36HS20_32XBR450_36XBR450_36XBR450H.pdf

Self Diagnosis Supported model SERVICE MANUAL MODEL NAME REMOTE COMMANDER DESTINATION DX-1A CHASSIS CHASSIS NO. KV-32HS20 KV-36HS20 KV-36HS20H KV-32XBR450 KV-32XBR450 KV-36XBR450 KV-36XBR450 KV-36XBR450H RM-Y183 RM-Y183 RM-Y183 RM-Y184 RM-Y184 RM-Y184 RM-Y184 RM-Y184 US US HAWAII US CND US CND HAWAII SCC-S47F-A SCC-S47E-A SCC-S54C-A SCC-S47D-A SCC-S48D-A SCC-S47C-A SCC-S48C-A SCC-S54B-A KV-32XBR450 RM-Y184 TRINITRON® COLOR TELEVISION 9-965-898-01 KV-32HS20/36HS20/36HS20H/32XBR450/36XBR450/36XBR450H SECTION 4: CIRCUIT ADJUSTMENTS ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER Use the Remote Commander (RM-Y183, RM-Y184) to perform the circuit adjustments in this section. Test Equipment Required: 1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator 4-1. SETTING THE SERVICE ADJUSTMENT MODE 1. Standby mode (Power off). 2. Press the following buttons on the remote commander within one second of each other: Channel 5 Sound Volume + Power DISPLAY 4-2. MEMORY WRITE CONFIRMATION METHOD 1. After adjustment, pull out the plug from the AC outlet, then replace the plug in the AC outlet again. 2. Turn the power switch ON and set to Service Mode. 3. Call the adjusted items again to confirm they were adjusted. SERVICE ADJUSTMENT MODE VIEW Device Item 2150P-1 SBOT 0 Data Item +7 SERVICE TV 4-3. REMOTE ADJUSTMENT BUTTONS AND INDICATORS Register Item WSL: 0 F/A FLAG: CBA FLAG: WRITE INTO MEMORY DEVICE UP READING THE MEMORY 1. Enter into service mode. 2. Press 0 on the remote commander. 3. Press ENTER to read memory. ITEM UP ITEM DOWN DATA UP DATA DOWN DEVICE DOWN EXECUTE READ MEMORY ADJUSTING THE PICTURE 1. 2. 3. 4. 5. Enter into service mode Press 2 or 5 on the remote to select the device item. Press 1 or 4 on the remote to select an item. Press 3 or 6 on the remote to change the data. Press MUTING then ENTER to write into memory. TEST RESET 4-1.1 RESETTING THE DATA Note: Be careful when using the remote! It will clear and re-initialize ALL NVM data including deflection adjustment data if not reset properly as follows: RESETTING THE DEFLECTION NVM DATA 1. Enter into service mode. 2. Press 7 , then MENU , and then press ENTER on the remote. RESETTING THE SYSTEM NVM DATA 1. Enter into service mode. 2. Press 7 , then 9 , and then press ENTER on the remote. RESETTING THE SYSTEM NVM DATA 1. Enter into service mode. 2. Press 8 and then press ENTER on the remote. RM-Y183 (KV-32HS20/36HS20/36HS20H ONLY) -- 18 -- KV-32HS20/36HS20/36HS20H/32XBR450/36XBR450/36XBR450H WRITE INTO MEMORY DEVICE UP ITEM UP ITEM DOWN DATA UP DATA DOWN DEVICE DOWN EXECUTE READ MEMORY TEST RESET RM-Y184 (KV-32XBR450/36XBR450/36XBR450H ONLY) -- 19 -- KV-32HS20/36HS20/36HS20H/32XBR450/36XBR450/36XBR450H SERVICE DATA LISTS DX1A-2001* Service List ------ Contents & Notes Device Name mPD64082 CXA2103Q IC3048 (Main) / B-board IC3110 (Sub) / B-board IC201 / A-board 86h 9Ah 9Eh IC3501 / BC-board B8h (W) & B9h (R) W&R: Write & Read Device Ref