Agilent HP 81110A Manual Changes p5 free download

File name HP 81110A Manual Changes p5.pdf

MANUAL CHANGES September, 01 Manual for Model Number 81110A,81104A Manual printed on April 2000 Edition1.1, E0400 Manual Part Number 81110-91021 Make all ERRATA corrections. Check the following table for your instrument serial prefix/serial number/EDC and make the listed changes to your manual New Item Serial Prefix or Manual Serial Prefix or Manual Serial Number Change Serial Number Change ERRATA 81104A 81110A DE387 00466 DE387 00805 Serialnumber independent 1 Serialnumber independent 1 5 September, 2001 Page 1 of 4 MODEL 81110A,81104A ____________________________________________________________________ Reference Quide: 81110A/81105A (P/N 81110-91021), page 106 Chapter: Agilent 81110A/81105A Specifications Width Accuracy 81111A: +/- 0.5% +/- 250ps(*) after selfcal, typical +/-3% +/-250ps(*) without selfcal 81105A: +/- 5% +/- 250ps(*) (*) Width accuracy specification is valid up to 5.5Vpp amplitude. Above 5.5Vpp, the width may increase typically up to +300ps . Page 103, Power consumption: 170VA max. Page 104, Specifications change to read: Recalibration period 3 years recommended Page 7, Output Modules for Agilent 81110A Mainframes add: The 81111A output modules are fitted with single ended outputs. Therefore the connectors for the complementary outputs have no functionality. Complementary outputs are only available when 81112A output modules are installed. (The 81110A always is fitted with connectors for the normal and the complementary outputs, regardless of the configuration. It has been designed this way to allow the easy retrofit of the output channels.) Page 106, Glitch-free timing changes change to read: This applies to continous mode with timing values < 100 ms (frequency: > 10 Hz), and consecutive values between one-half and twice the previous value. Page 106, Width add: The pulse width is specified at fastest transitions. Page 107, Delay add: Delay and Double Pulse Delay are specified at fastest leading edges. __________________________________________________________________________________ 05.09.01 Page 2 of 4 MODEL 81110A,81104A ____________________________________________________________________ INDEX OF MANUAL CHANGE MANUAL FRAME CHANGE ERRATA 1 See attached Declaration of Conformity ______________