Agilent HP 54750A 252C 83480A User free download

File name HP 54750A_252C 83480A User.pdf

User's Guide Agilent 83480A Analyzer, Agilent 54750A Oscilloscope Agilent Part No. 83480-90050 Printed in USA June 2000 Agilent Technologies Lightwave Division 1400 Fountaingrove Parkway Santa Rosa, CA 95403-1799, USA (707) 577-1400 HP and Hewlett-Packard are U.S. registered trademarks of Hewlett-Packard Company. Notice. The information contained in this document is subject to change without notice. Agilent Technologies makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and tness for a particular purpose. Agilent Technologies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Restricted Rights Legend. Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 for DOD agencies, and subparagraphs (c) (1) and (c) (2) of the Commercial Computer Software Restricted Rights clause at FAR 52.227-19 for other agencies. Regulatory Information. The front matter of this book contains regulatory information. Copyright Agilent Technologies 2000 c All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Safety Symbols The following safety symbols are used throughout this manual. Familiarize yourself with each of the symbols and its meaning before operating this instrument. CAUTION The caution sign denotes a hazard to the instrument. It calls attention to a procedure which, if not correctly performed or adhered to, could result in damage to or destruction of the instrument. Do not proceed beyond a caution sign until the indicated conditions are fully understood and met. WARNING The warning sign denotes a life-threatening hazard. It calls attention to a procedure which, if not correctly performed or adhered to, could result in injury or loss of life. Do not proceed beyond a warning sign until the indicated conditions are fully understood and met. L Instruction The instruction manual symbol. The product is marked with this symbol when it is necessary Manual for the user to refer to the instructions in the manual. CE The CE mark is a registered trademark of the European Community (if accompanied by a year, it's when the design was proven). ISM 1-A This is a symbol of an Industrial Scientic and Medical Group 1 Class A product. The CSA mark is a registered trademark of the Canadian Standards Association. j The line power on symbol.