Agilent HP 42841A OPS free download

File name HP 42841A OPS.pdf

Caution Use the following procedure when turning off the 42841A: 1. Turn off the DC bias current output. 2. Disconnect a DTU (Device Under Test) from the test fixture. 3. Turn off the 42841A LINE ON/OFF switch. If turning off the 42841A power with a DUT connected, the 42841A internal circuit may be damaged. Safety Summary When you notice any of the unusual conditions listed below, immediately terminate operation and disconnect the power cable. Contact your local Agilent Technologies sales representative or authorized service company for repair of the instrument. If you continue to operate without repairing the instrument, there is a potential fire or shock hazard for the operator. n Instrument operates abnormally. n Instrument emits abnormal noise, smell, smoke or a spark-like light during the operation. n Instrument generates high temperature or electrical shock during operation. n Power cable, plug, or receptacle on instrument is damaged. n Foreign substance or liquid has fallen into the instrument. Agilent 42841A BIAS CURRENT SOURCE OPERATION MANUAL SERIAL NUMBERS This manual applies directly to instruments with serial number prex 2915J For additional important information about serial numbers, read \Serial Number" in Chapter 4 of this Manual. Agilent Part No. 42841-90010 Printed in JAPAN March 2000 Fifth Edition Notice The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of the Agilent Technologies. Agilent Technologies Japan, Ltd. Component Test PGU-Kobe 1-3-2, Murotani, Nishi-ku, Kobe-shi, Hyogo, 651-2241 Japan Copyright 1989, 1991, 1996, 2000 Agilent Technologies Japan, Ltd. c Manual Printing The manual printing date and part number indicate its current History edition. The printing date changes when a new edition is printed. (Minor corrections and updates that are incorporated at reprint do not cause the date to change.) The manual part number changes when extensive technical changes are incorporated. April 1989 : : : : : : : : : : : : : : First Edition (part number: 42841-90000) April 1991 : : : : : : : : : : : : Second Edition (part number: 42841-90000) December 1991 : : : : : : : : Third Edition (part number: 42841-90000) December 1996 : : : : : : : Fourth Edition (part number: 42841-90000) March 2000 : : : : : : : : : : : : : Fifth Edition (part number: 42841-90010)