Agilent N2830A Series InfiniiMax III+ Probes Configuration Card N2830-92000 c20140623 [2] free download

File name N2830A Series InfiniiMax III+ Probes Configuration Card N2830-92000 c20140623 [2].pdf

Keysight N2830A-Series InfiniiMax III+ Probes Connecting the Probe to the In niium Scope To Connect To Disconnect Locate the User's Guide 1. With the lever in relaxed in position push the probe Move and hold the lever at R onto the BNC. (Release) and pull the probe Download the user's guide from the Read the user's guide in Keysight's Probe Resource Center from the BNC. 2. The lever moves towards the R (release) and returns probe's product page on www.keysight.com. (PRC). The PRC is an application that runs on a PC, Mac, or iOS device. Available at www.keysight.com/ nd/PRC. to symbol. 3. Move the lever towards the symbol until snug. CAUTION. Risk of Damage Due to Electrostatic Discharge (ESD) This probe is a high-performance device that ESD can quickly and imperceptibly damage or destroy. Always work at a static-safe workstation and wear a wrist strap when handling probe components. Refer to the User's Guide. To connect the probe to the oscilloscope, follow these four steps: If the DUT is not grounded Connect the probe Additional Accessories 1 to the oscilloscope via the 2 head to the DUT. AC mains ground, connect The probe the DUT ground to the oscillo- ampli er must not be N1022B for connecting the In niiMax III+ probing system to In niium 86100D DCA-X scope ground. An example of a connected to the sampling oscilloscope or other RF instruments. oating ground is a battery- oscilloscope or the probe head! N2787A 3D probe positioner for holding the browser or probe ampl