Agilent ReadMe U4305A 8 74 PCIe Gen3 Exerciser Software Release Notes (Version 8.74) [6] free download

File name ReadMe_U4305A_8_74 PCIe Gen3 Exerciser Software Release Notes (Version 8.74) [6].pdf

ReadMe Keysight U4305A Protocol Exerciser for PCI Express Gen3 Version 8.74 November 12, 2014 Software Version 8.74.026 Internal Build 8.74.46.26 FPGA Versions 7.18 (Exerciser image) , 5.7 (PTC image) Firmware version 0.9 Platform Version 1.10.1016 (Release) Package GUID 577FF5F3-88AD-4554-AA14-0DA2696D1117 AgtUSBManager Version 3.8 Update GUI Version 3.0 Branch ati_pcie_integration_exerciser_gen3_nvme_rel8.74 Overview PCIe 3.0 exerciser can help you validate your device whether it is a server or an add-in card. The emulated personality is easily switched through software for either a root complex or an end point. It has support for PCIe, MRIOV, SRIOV protocols. www.keysight.com/find/pci-express Current OSes supported Windows XP 32/64, Windows 7 32/64 Important usage notes Refer to Help for details on how to install and use this package. 1. If you have USB Device(s) (U4305A) attached to your system but only one or none of them receives a valid module number (module numbers on the U4305A devices are 10001, 10002 etc.), this might be due to one of the following reasons: Readme for Keysight U4305A Protocol Exerciser for PCI Express Gen3 a. The USB Device(s) has been plugged in for the first time after rebooting the host controller PC and another USB Device or module was already locked by a session. Please close all existing sessions and update the module numbers. Now run Start->Programs->Keysight SPT->Tools->Diagnostics and hit the button 'Update Module Numbers'. b. If you are working on a system with Windows XP SP2 this might be a problem with the loopback addresses. This has been fixed by Microsoft in the patch KB893066. You can download the patch at the Microsoft site http://www.microsoft.com/downloads/ 2. If your USB controller supports USB2.0 make sure that you use the delivered (or corresponding) USB2.0 cable only. 3. Release 7.3(E2960B Gen2 Exerciser) & Release 8.x (U4305A Gen3 Exerciser) cannot exist on same machine. 4. If you don't see modules after updating Firmware then restart AgtN2XUSBManagerService & AgtN2XResourceManager. 5. Windows 7 support a. Run the installer exe in Administrator Mode b. User Account control Settings should be "Never notify" 6. The location of the OpenE script has been changed from 'C:\AgilentPciExpress' to \8.x Release\Samples\PCIe Port. 7. PTC works at x1 link-width. Higher lanes might be required to be physically masked for DUTs with higher link- widths. 8. It is observed that error message "Failed to generate pkgIndex.tcl for dir \lib\KeysightN2X" gets displayed in case installation/un-installation steps were not done in the proper sequence. In such cases, please do the f