Samsung VC-6000 free download

File name VC-6000.pdf

VACUUM CLEANER VC-6000 SERIES 3VACUUM CLEANER CONTENTS 1. Precautions 2. Product Specifications 3. Disassembly and Reassembly 4. Exploded View and Parts List 5. PCB Diagram 6. Schematic Diagram ©Samsung Electronics Co., Ltd. April. 2001. Printed in Korea Code No. DJ68-00102A REV(0.0) 1. Precautions Technical service information contained here is supplied for use by qualified service personnel. Specifications are subject to change without notice. 1. Do not use the vacuum cleaner when rug or floor is wet. 2. Close supervision is necessary when any appliance is used by or near children. Do not allow the vacuum cleaner to run unattended at any time. 3. Do not use the vacuum cleaner without a dust bag. Replace the dust bag frequently when picking up very fine material such as powder. Replace the dust bag before it is excessively full in order to maintain optimum performance. 4. Never use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep the vacuum cleaner away from stoves or heat source. Heat can deform and discolour the plastic parts of the unit. 5. Avoid picking up hard or sharp objects with the vacuum cleaner. Do not stand on the hose assembly, put a weight on the hose or block the suction or exhaustion part. 6. Unplug the cleaner when not in use. Turn off the power switch before unplugging. 7. Grasp the plug firmly when removing it. To avoid damage to cord, plug, prongs or socket, always disconnect the cord from the electrical outlet before replacing the dust bag or servicing the cleaner. 8. The use of an extension cord is not recommended. 9. Repairs should be done only by an qualified service personnel. SAMSUNG ELECTRONICS CO., LTD. 1 2. Product Specifications Power Source Power Consumption Dimensions 502mm(L)X310mm(W)X316mm(H) Look at the data plate on the bottom of cleaner Weight Gross : 6.7kg Net : 4.7kg(excluding all accessories) Floor nozzle, Crevice tool, Dusting brush, pipe, Hose, Hanger Accessory Accessories 2 SAMSUNG ELECTRONICS CO., LTD. 3. Disassembly and Reassembly 3-1 Removal of Button-C/Reel and Button-Switch Detach the BUTTON with a flat head screw driver. 3-2 Removal of Panel - Control Loosen the three screws and detach PANEL-CONTROL. 3-3 Disassembly of Cover-Dust ASS'Y Loosen the one screw and detach the INDICATOR-ASS'Y. SAMSUNG ELECTRONICS CO., LTD. 3 3-4 Disassembly of Main Body-Control/Removal of Main PCB Assembly Loosen the four screws and grasp both sides of the BODYCONTROL. Lift it upwards, Separate the WIRE ASS'Y from the PCB-MAIN ASS'Y. 3-5 Motor Replacement 1. Loosen the two screws and separate COVERMOTOR from the body. 2. Separate MOTOR and WIRE-HARNESS MOTOR. 3-6 Cord-Reel Replacement 1. Disassemble the GUARD-CORD with a flat head driver. (Insert it into the gap and push the hook to the opposite side.) 4 SAMSUNG ELECTRONICS CO., LTD. 2. Separate the CORD-REEL from the main body. 3. Hold the COVER-REEL, and wind the power cord to the left 4~5 times. 4. After windin