Samsung VC-6800 free download

File name VC-6800.pdf

VACUUM CLEANER VC-6800 SERIES DUP ATOR VACUUM CLEANER CONTENTS 1. Precautions 2. Disassembly and Reassembly 3. Exploded Views and Parts List 4. PCB Diagrams 5. Schematic Diagrams Samsung Electronics Co., Ltd. JANUARY. 1999. Printed in Korea. Code No. DJ68-00063A REV(0.0) 1. Precautions Technical service information contained here is supplied for use by qualified service personnel. Specification are subject to change without notice. 2. Disassembly and Reassembly 2-1 Removal of COVER-DUST ASS'Y 1) Detach the COVER-DUST ASS'Y with a flat head screw driver. 2-2 Disassembly of COVER-DUST ASS'Y Loosen the four screws and detach INDICATOR ASS'Y, and DAMPER ASS'Y. 1. Do not use the vacuum cleaner when rug or floor is wet. 2. Close supervision is necessary when any appliance is used by or near children. Do not allow the vacuum cleaner to run unattended at any time. 3. Do not use the vacuum cleaner without a dust bag. Replace the dust bag frequently when picking up very fine material such as powder. Replace the dust bag before it is excessively full in order to maintain optimum performance. 4. Never use the vacuum cleaner to pick up matches, live ashes or cigarette butts. the unit. Keep the vacuum cleaner away from stoves or heat source. Heat can deform and discolour the plastic parts of 5. Avoid picking up hard or sharp objects with the vacuum cleaner. Do not stand on the hose assembly, put a weight on the hose or block the suction or exhaustion part. 6. Unplug the cleaner when not in use. Turn off the power switch before unplugging. 7. Grasp the plug firmly when removing it. To avoid damage to cord, plug, prongs or socket, always disconnect the cord from the electrical outlet before replacing the dust bag or servicing the cleaner. 8. The use of an extension cord is not recommended. 9. Repairs should be done only by an qualified serivce personnel. DUP ATOR 2-3 Removal of Main Body Release 5 screws and lift the BODY-MID upward. SAMSUNG ELECTRONICS., LTD SAMSUNG ELECTRONICS., LTD 2-4 Removal of Main PCB Assembly Separate the WIRE ASS'Y and TRANS ASS'Y from the MAIN-PCB ASS'Y and loosen the screw. 1 2 2-5 Removal of Main CASE UP Assembly Loosen the two screws and detach CASE UP ASS'Y. 2-7 Cord Reel Replacement 1) Detach the guard-cord with a flat head screw driver. 3-2 Assembly-Brush 1 2-6 MOTOR replacement 1) Loosen the four screws and separate CASE-MOTOR,B from the MOTOR. 2) Lossen the screw and separate MOTOR and W/HARNESS-MOTOR. DUP ATOR Location No. 1 2 2-1 2-2 3 4 5 6 7 8 9 10 11 Code No. Description Specifiction Q'ty 1 1 1 1 2 1 1 1 1 1 2 1 2 Remarks ! ! 2) Separate the CORD-REEL from the body. 3) Hold the body reel and wind the power cord 3 times. 4) When the winding is completed, immediately assemble the CORD-REEL to the body. DJ67-60186B DJ93-10122D DJ67-50199B DJ61-00011B DJ66-70223B DJ72-00020B DJ66-50150C DJ67-20161B DJ67-60176B DJ67-10187A DJ61-70179A DJ72-00019B DJ63-70117A ASSY-BRUSH ASSY-PIPE C/BRUSH PIP